muunch

hotboxing the cockpit
Anxiously awaiting my new condenser+mp. Don't think it's even been shipped yet but I think I'll bust out the 'ol cap now and see if the gross taste is gone. Assuming the Ti screens are probably a bit better tasting than the ceramic huh?
 

Kalessin

Well-Known Member
Anxiously awaiting my new condenser+mp. Don't think it's even been shipped yet but I think I'll bust out the 'ol cap now and see if the gross taste is gone. Assuming the Ti screens are probably a bit better tasting than the ceramic huh?
Even if it still tastes bad, it's super simple to get it clean again. Some q-tips, iso, and a lighter to burn off the screen is really all that's needed

Edit: also, I know people have issues getting the screen out, I do at times, but I've found recently that using a q tip to push the screen out works great, it's so soft it eases my worries over using too much force
 
Last edited:

muunch

hotboxing the cockpit
Well, I broke the only screen I have. So there's that. lol

Til next time I guess!

edit: it was putting it back in I had trouble with. That little u-ring came out and took some effort to get back in, so I thought the screen did as well. Apparently not. No biggie.
 

Kalessin

Well-Known Member
Well, I broke the only screen I have. So there's that. lol

Til next time I guess!

edit: it was putting it back in I had trouble with. That little u-ring came out and took some effort to get back in, so I thought the screen did as well. Apparently not. No biggie.
That's awful. Got any hemp or similar? It works in a pinch
 

muunch

hotboxing the cockpit
I could make a hemp fiber filter ala @Squiby but I'm all good. I'll just continue waiting for the new stuff or maybe give it a try once I grab some iso later. None around atm so just did warmish water + qtips and can still detect a faint combustion/resin smell.
 

Diggy Smalls

Notorious
I lost my only screen a couple days in. I've been using a basket screen from a log vaporizer and it's been just fine. In fact I can't tell the difference between the two.
Not the bigger screens that go over the heater port, but the smaller ones that go inside the heater port
 

Vapor_Eyes

taste buds
And now if morning could simply come sooner, I can't wait to get back to work!

That one sentence shows why Dynavap is as great as it is. George has an enthusiasm for his job that shows in every aspect of his business. He has seemingly limitless amounts of energy, and it makes me happy to see his hard work be rewarded with such a great response from this community.
 

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Got my order in, added a triple torch. I don't like my single torch, I like my double, hopefully the triple is just right!
well i just got notification my order shipped so that's pretty perfect timing
Awesome!
As a wood man I knew it would not take you long to crest the ridge & build up some speed.

source.gif


I have been a bit of a log hog lately but my VonG still gets a workout at least once per day even during a VapCap lull.

The thought of putting Ti in my mouth means it will never happen anytime soon. I like wood & don't mind a wooden mouthpiece one bit. That said I expect I will get a Omni VonG as you can set & forget it for Vonging.
Haha, you know me too well!

Free porn!
wlv7Y78.jpg

hFTkBoM.jpg
 

almost there

Well-Known Member
Got my order in, added a triple torch. I don't like my single torch, I like my double, hopefully the triple is just right!

Awesome!

Haha, you know me too well!

Free porn!
wlv7Y78.jpg

hFTkBoM.jpg
Very hypnotic, u have my full attention:clap:. Single torch isn't so bad for me, more time consuming but I find I can tweak it more vs the quick convenience of the triple. I do all my vaping outside so depending on the weather the triple torch is a combustion risk if I play with the "boost" too often.
 

Lookatmeglow

I seem to have a bad case of VAS
Got my order in, added a triple torch. I don't like my single torch, I like my double, hopefully the triple is just right!

Awesome!

Haha, you know me too well!

Free porn!
wlv7Y78.jpg

hFTkBoM.jpg

I have been loving the triple torch, but want to try the dual to see how it compares. A single torch works, but is a little too slow for my liking. I am hoping a dual torch won't burn through as much butane as the triple, but will still heat the cap quick enough.

Also, that is some beautiful glass. If that is a burl omnivong, you have the setup I am planning on getting.
 

pushpaw

Well-Known Member
Hi all. Been lurking in this thread off and on for some time now. I had been almost ready to pull the trigger on a TiWoody months ago, but ended up with a Sticky Brick as my first butane vape instead. (And I love my Sticky Brick, it is hands down my fave at the moment.) Shortly after that I got the Brick Jr. to have a more portable version, but it just doesn't really do it for me. It's fine, but at home I always go for the full sized brick and out and about it has been either my Grasshopper (I was a backer, so have had it for a while... long enough for 2 warranty returns so far) or just an ego battery and a prefilled cart (I'm in a legal state). To be honest it is almost always the latter as after having the hopper stop working twice now (both times when I was out and about) and the hassle of recharging, worrying about dead batteries (the ego battery I probably only charge once a week, carts are pretty simple but just not as satisfying as flowers or real shatter, etc.) Anyways, blablabla...

A friend got a TiWoody so I got to try it out back around the holidays. He loves it.

So after talking myself into and out of this several times, I just placed an order for a titanium omni and a bocote stash. (Plus some extra screens, the squishy mouthpiece and some degummed hemp fiber, of course. Gotta be prepared!)

Can't wait to get it, and of course to figure it all out and all that. :D Now just the hard part of waiting for a shipping notification.
 

phattpiggie

Well-Known Member
Accessory Maker
A very full green envelope dropped thru my door the other day. Many thanks to all the @VapCap team.

The performance is pretty similar to the old new tip, but the overall feel of the new Ti is much better.
The rifling goes the proper way as well now, thank you George.:)
There had to be a crossover of ideas at some point. I'm only up to 8 sides on my Lacewood stem how about you CNC a Dodecahedvong.

@SSVUN~YAH Nice glass, and is that a piece of Scratched in there? I'm hoping to be speaking to @mvapes this week.
I prefer my triple torches getting whatever results I want with a change in flame intensity or the area I apply the heat.
4 or 5 light tasty hits with a nice vapor filled finale or a one and done.
Which took me by surprise when I ran a single heat cycle bowl the other day, by far the thickest vapor I've ever experienced.
 

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Very hypnotic, u have my full attention:clap:. Single torch isn't so bad for me, more time consuming but I find I can tweak it more vs the quick convenience of the triple. I do all my vaping outside so depending on the weather the triple torch is a combustion risk if I play with the "boost" too often.
Thanks, it sounds like you have lots of experience with these marvelous creations.
I have been loving the triple torch, but want to try the dual to see how it compares. A single torch works, but is a little too slow for my liking. I am hoping a dual torch won't burn through as much butane as the triple, but will still heat the cap quick enough.

Also, that is some beautiful glass. If that is a burl omnivong, you have the setup I am planning on getting.
Thank you, it is a skinny burl. As far as the butane consumption, I definitely need to keep a can handy with my dual torch. I have a feeling I will be using both frequently when the triple arrives.
All about the burl nona VonG boys
:rockon:
A very full green envelope dropped thru my door the other day. Many thanks to all the @VapCap team.

The performance is pretty similar to the old new tip, but the overall feel of the new Ti is much better.
The rifling goes the proper way as well now, thank you George.:)
There had to be a crossover of ideas at some point. I'm only up to 8 sides on my Lacewood stem how about you CNC a Dodecahedvong.

@SSVUN~YAH Nice glass, and is that a piece of Scratched in there? I'm hoping to be speaking to @mvapes this week.
I prefer my triple torches getting whatever results I want with a change in flame intensity or the area I apply the heat.
4 or 5 light tasty hits with a nice vapor filled finale or a one and done.
Which took me by surprise when I ran a single heat cycle bowl the other day, by far the thickest vapor I've ever experienced.
You've got a keen eye! Amazing work by @mvapes I have two functional pieces and several other artworks from the man, the myth, the legend! :bowdown:
Thanks for the kind words and keep up the incredible creations in the woodshed! :science:
 
Top Bottom