Oh, it has a carb hole, altought the pics don't show it. I guess all bodies and stems have one (unless requested otherwise - which I don't know they still accept, I remember reading here that they did accept it in the past).
Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
Oh, it has a carb hole, altought the pics don't show it. I guess all bodies and stems have one (unless requested otherwise - which I don't know they still accept, I remember reading here that they did accept it in the past).
mmenzie
My friends call me "Menz"
totally disagree. i love my spinning MP especially when i am not heating with my IH. with my IH it does not matter. i like my spinning MP so much i wish there was a titanium one which i know there are not.
to each there own and life would be boring if we all thought alike, but i am a +1 for the spinning MP
Last edited:
ataxian
PALE BLUE DOT
I only smoked joint's and got into vaporizing 2011 so I'm very new to all this!
2012 I finially tried water and the FLAVOR was the best!
I was planning on both H2O path and DRY!
Can't wait to see what all the fuss is about!
Squiby
Well-Known Member
Try a paste of baking soda and water, give the tip and condenser a bit of a scrub using the paste and a narrow Q-Tip before rinsing thoroughly, then let dry before reassembling. Hopefully that will get the soap scent out.
The midsection of a Vapcap can be straight like a cigarette or shaped to adapt to water. We call them VonGs; Vapcap on Glass.
You can buy a complete Ti VonG Vapcap from Dynavap
https://www.dynavap.com/dynashop/vaporizers/vong/omnivong/skinny-body-blackwood-omni-mp
https://www.dynavap.com/dynashop/vaporizers/vong/nonavong/cocobolo-stem
or just a spare VonG body or stem to switch out
https://www.dynavap.com/dynashop/parts/stem-nonavong-cocobolo-inactive
https://www.dynavap.com/dynashop/parts/body-nonavong-cocobolo-inactive
Then there are stunning aftermarket artists. Check out their threads. Make sure you're sitting and prepare to be WOWed.
@phattpiggie makes stunning custom stems/VonGs. You need to check out his thread and scroll through his beautiful creations.
http://fuckcombustion.com/threads/phattpiggies-wood-shed.22215/page-27#post-1143032
@Winegums makes wonderful VonGs for use with water tools as well as interesting and creative boxes and dugouts.
http://fuckcombustion.com/threads/winegums-woodcraft.23750/
Lots of options to use a Vapcap with water.
The Vapman was my previous go to vape. I have three.
I loved them till I discovered the Vapcap. IMO the Vapman is slightly harsher, the air intake holes are harder to regulate. It's harder to thoroughly clean. It's shape makes it less portable. You must only use a single jet lighter, and temperature regulation is more difficult. So, I don't use my Vapman anymore. But they are very good, beautifully crafted vapes.
I feel that the Vapcap is superior by a country mile.
ataxian
PALE BLUE DOT
FabulatorPoeta
Where has the time gone?
I have been using only little candle lights or a small paraffin oil lamp (the best imo) with the M with much enjoyment. Take time to slowly bring the click alive on your M. Don't fill it too much and leave the herb loose. 1st cycle, go 3 seconds beyond the click. Everything will be vaporized nicely and evenly after three or four cycles.
I have never used a lighter of any kind, and I only vape inside at home. I microdose. In fact i really enjoy the time it takes and the atmosphere surrounding the use of a vapcap. The lamp, on a low table beside a comfortable arm chair, music in the background, heating the cap with the rotating movements swaying in the flame, waiting for the click and then tasting the vaped herb and feeling the subtle changes in vibration, all of this is in itself a soothing ritual. I can use both hands to heat my M while I relax in the chair. The time it takes is just that, the time it takes. I feel that, during that time, there is an esthetical kinship with some sophisticated and in no way sordid, opiium salon. Poetic atmosphere favorable to meditation, creation or simple relaxation.
Set and settings. The journey is an integral part of getting there...
Baudelaire's Invitation au voyage...
"Là tout n'est qu'ordre et beauté,
luxe, calme et volupté...
There all is order and beauty,
Luxury, peace, and pleasure."
Last edited:
Way to go ^^^^
^^^^^^
NuhJokaSmoka
Well-Known Member
What a torture to get the Vapcap from this f... stupid customs clerk, but finally it`s here
Your black friday order? Still waiting for mine. I hope i get it before christmas holidays.
That's a ridiculous amount of time to be waiting. Hopefully you get it soon.
ArthurJ
Well-Known Member
For @mccringleberry, a closeup view of my carbon fiber omnivap, I think you can make out the carbhole.
NuhJokaSmoka
Well-Known Member
I was prepared. Last time it took 21 days at customs.
The Beagle
Bubbles & Bags
I had several flights inside the EU (last one to BCN) with my Omni and never had a problem. Just clean it before leaving and bring a couple of alcohol wipes with you for the return flight.
Alex3oe
Accessory Maker
CuckFumbustion
Lo and Behold! The transformative power of Vapor.
Yes, just that both methods will put soot on your cap. A Bic lighter needs to stay on longer than a single torch it seems and my thumb starts getting hot. I would respect the click and not a sec afterwards with a Bic or cheap lighter if you were in a pinch.
Did I understand you correctly.
As in you have a VC coming your way? 
Do you know what you are getting? 
Hope to hear what your take is on it. 
Adapters for glass- I have 3 MP, but I use a ring of silicone tubing to fit my 'M' inside a 14mm female socket end for water tools. Have some 3 hole optional TwisTit stoppers for future projects.
Like the ecig bubbler pairing that one poster had with their travel kit.
ataxian
PALE BLUE DOT
I will use 18mm x 14mm reducer bushing and plumbers tape (home depot teflon)Yes, just that both methods will put soot on your cap. A Bic lighter needs to stay on longer than a single torch it seems and my thumb starts getting hot. I would respect the click and not a sec afterwards with a Bic or cheap lighter if you were in a pinch.
Did I understand you correctly.
Adapters for glass- I have 3 MP, but I use a ring of silicone tubing to fit my 'M' inside a 14mm female socket end for water tools. Have some 3 hole optional TwisTit stoppers for future projects.
Like the ecig bubbler pairing that one poster had with their travel kit.
@CuckFumbustion I will keep my plug-in's for sure. (my wife bought me my EVO)
The "M" I will put in the garden.
READING DEVICE!
I have a few book's to read. (mostly non-fiction)
My DAUGHTER is way ahead of me. (so is my wife)
The "M" will be a add-on!
SATURDAY = MAX FLIGHT
CuckFumbustion
Lo and Behold! The transformative power of Vapor.
Congrats. Looks like you found a purpose and place in mind already. You could also take the 'M' poolside, in style. Do you have a torch lighter?If I was to treat my VC's to the full desktop treatment, I'd get with one of @Pipes contraptions. VC's are more for me when I break the tether from Moon Base EVO. All thought I will have the 3 headed hydra setup with the plugs arriving.
Summer
Long Island, NY
JCharles
FC 06/06/2017 | ACMPR 26/07/2017
When it comes to water pipe adapters for my M, I prefer using the small universal water pipe adapter from Delta3DStudios.
I also have a bunch of the fat mouth pieces (DynaVap sent me 5 after I got in touch with them for 1 that was missing from my BFCM orders - F Ya).
I don't get the same clouds with the fat MP, and it requires a 18/14mm reducer for my favourite pipes.
@Ratchett adapters rock. I have them for a Pax 3 and now the DynaVap. Along with a bunch of other super useful tools from his studio.
@Summer those look like water pipe plugs for cleaning. If so, they are super useful!!
I also have a bunch of the fat mouth pieces (DynaVap sent me 5 after I got in touch with them for 1 that was missing from my BFCM orders - F Ya).
I don't get the same clouds with the fat MP, and it requires a 18/14mm reducer for my favourite pipes.
@Ratchett adapters rock. I have them for a Pax 3 and now the DynaVap. Along with a bunch of other super useful tools from his studio.
@Summer those look like water pipe plugs for cleaning. If so, they are super useful!!
CuckFumbustion
Lo and Behold! The transformative power of Vapor.
Rubber stoppers where you can tear off the holes as an option. I was thinking about say a water piece. With up to 3 VC's in one of these stoppers.@CuckFumbustion, what are these?
Twistit® Rubber Stoppers - Solid, One hole, Two hole, Three hole
CuckFumbustion
Lo and Behold! The transformative power of Vapor.
It's an option for lab glassware. So you can 0 to 3 holes for whatever your project you have come up with.@Combustion, I understand how you're envisioning vc adaptation of this item, but why are there removal holes in a stopper to begin with?
Thanks shout out to @JCharles.
stark1
Lonesome Planet
Nice idea. You may want to check the hole diameter however, they may be 5mm as a standard.....
(Also, you may need a size 1, or possibly 2 to fit an 18mm bubbler)
Last edited:
CuckFumbustion
Lo and Behold! The transformative power of Vapor.
It is made to fit straight glass tubing. So it is some sort of standard sized. They seem to only offer the one hole size. Worst case, the very end of the mouthpiece of my 'M's could be shoehorned in, if it is say one size too small. I have a 6pk of #5 stoppers to arrive.Nice idea. You may want to check the hole diameter however, they may be 5mm as a standard.....
' Available in standard sizes 3 - 10. (Size 3 and 4 are two holes only, Sizes 5 -10 have 3 holes) '