Dynavap VapCap

MinnBobber

MinnBobber

Well-Known Member
Today was a combustion event, fuck combustion :(
I tried the M on the front porch with triple torch, flamed when no traffic noise, a very nice first hit on 2+ yr old CO bud and then the combustion.....
Blackened some primo bud so bummed.
Never heard or felt the clicks...
 
cybrguy

cybrguy

Putin is a War Criminal
kamut said:
1. Earlier in this thread there was speculation that, with the vongs that have mouthpieces, the vong might not go all the way into the 14mm female joint on your water piece because the mouthpiece protrudes too far down. I'm picturing this happening with a piece where I have put a 14mm female adaptor on there, so the joint is kinda shallow. Does anybody know if this is an actual problem?
Click to expand...
It can be, depending entirely on the piece. I just went over to the cheap glass thread and grabbed the fist thing that might illustrate the point.
3FHsi4p.jpg

I don't know if this is an 18mm or 14mm joint, but lets assume 14mm. Can you see how a MP on the end of a Vong might be too long and keep the vong from sealing? That would be a bad thing. The MP should be fine on the end of a vong IN MOST CASES. But there will be some where it's not.

kamut said:
2. If the mouthpiece can be a problem, is it okay to just smoke straight off the regular nonavong that comes without a mouthpiece? Does the mouthpiece do anything for your mouth or does it just aid your spinning? I think I can spin the piece over a flame without a spinning mouthpiece, so I'm just wondering if I want a mouthpiece.
Click to expand...
Absolutely you can. My Nonavong has no MP and I hit it direct quite often. The MP is nicer on the lips, but it is in no way necessary. All the woodys that are not woody-s's are MP free...

Meaning they use a stem (62mm) rather than a body (45mm) and a mp (17mm).
 
Last edited:
mucsusn

mucsusn

60 going on 20
kamut said:
A couple questions on the vong:

1. Earlier in this thread there was speculation that, with the vongs that have mouthpieces, the vong might not go all the way into the 14mm female joint on your water piece because the mouthpiece protrudes too far down. I'm picturing this happening with a piece where I have put a 14mm female adaptor on there, so the joint is kinda shallow. Does anybody know if this is an actual problem?

2. If the mouthpiece can be a problem, is it okay to just smoke straight off the regular nonavong that comes without a mouthpiece? Does the mouthpiece do anything for your mouth or does it just aid your spinning? I think I can spin the piece over a flame without a spinning mouthpiece, so I'm just wondering if I want a mouthpiece.

I don't know how much I would actually use it with a water piece, but I would like to have that capability built in if it's not a problem. That's why I'm leaning toward the vong.
Click to expand...
It's fine to hit the straight gong without a mouthpiece. If you're only going to go to water occasionally, you can get a Ti-Woody S and a Nona stem to swap out for water sessions. All kinds of possibilities, that's just one of many.....also just get a soft MP, which easily stuffs into most 14mm female joints.
 
Alegre

Alegre

Pobre payaso
Well, after all these months I'm still loving my "M". My milaana and cap are my daily combo....... I get bigger rips out of the m though.

I usually try to get as many small hits as I can from a heating cycle, I fill up my lungs big, then exhale, hold, exhale, hold, etc......

First attempt at making a video so, easy on me guys lol

This is me exhaling, second heating cycle with small nugs.

 
almost there

almost there

Well-Known Member
Alegre said:
Well, after all these months I'm still loving my "M". My milaana and cap are my daily combo....... I get bigger rips out of the m though.

I usually try to get as many small hits as I can from a heating cycle, I fill up my lungs big, then exhale, hold, exhale, hold, etc......

First attempt at making a video so, easy on me guys lol

This is me exhaling, second heating cycle with small nugs.

Click to expand...
Looking good:clap:
 
almost there,
  • Like
Reactions: turk
VisiblyVaped

VisiblyVaped

Well-Known Member
I think this is the longest this thread has gone without a post.
That's unacceptable. My life is currently too "exciting" (read: a kid is hectic as fuck) and when I look at my phone expecting what is essentially vape porn and I see jack shit in my alerts......

I'm disappointed in everyone
 
KidFated.

KidFated.

Unknown Member
VisiblyVaped said:
I think this is the longest this thread has gone without a post.
That's unacceptable. My life is currently too "exciting" (read: a kid is hectic as fuck) and when I look at my phone expecting what is essentially vape porn and I see jack shit in my alerts......

I'm disappointed in everyone
Click to expand...
well, I'm consistently grabbing reclaimed oil from this thing and filling a sili jar. I haven't gone through 7 grams and I have a reasonable amount of darker oil. and yeah, my kids about to start crawling, so its about to be hectic around here as well.
 
S

snaffle

Well-Known Member
KidFated. said:
well, I'm consistently grabbing reclaimed oil from this thing and filling a sili jar.
Click to expand...

Basic question, but how do you go about getting reclaim? Is it a case of (dry) scrubbing the condensor with a pipe cleaner and collecting what is stuck to it? Or soaking / cleaning it with iso, and waiting for that to evaporate?
 
snaffle,
  • Like
Reactions: DirtyD
WakeAndVape

WakeAndVape

VapeLife X
snaffle said:
Basic question, but how do you go about getting reclaim? Is it a case of (dry) scrubbing the condensor with a pipe cleaner and collecting what is stuck to it? Or soaking / cleaning it with iso, and waiting for that to evaporate?
Click to expand...
there are a few ways to do it...the ways you've mentioned WILL work, but you can get a (tiny) piece of silicone and push it through the condenser OR you can do it with hempfiber (my preferred method)

you can also heat your condenser and let the goo run out into a silicone container...you can also soak it in iso, evaporate and vape.

the right way is the one that works best for you.

KidFated. said:
my kids about to start crawling, so its about to be hectic around here as well.
Click to expand...
VERY hectic! but more worry-some is when they start to really talk...my daughter hasn't stopped talking yet :rofl:
 
goodpunk6

goodpunk6

Well-Known Member
snaffle said:
Basic question, but how do you go about getting reclaim? Is it a case of (dry) scrubbing the condensor with a pipe cleaner and collecting what is stuck to it? Or soaking / cleaning it with iso, and waiting for that to evaporate?
Click to expand...

get your hand on some degummed hemp fiber. Dynavap sells some off of their website. then ball it up, use a qtip and push the little ball of DHF through the condenser. You can just load that into the chamber or use a dab tool and a glass or silicone vial for concentrates.
 
Wolf46

Wolf46

Vapor War Team Cap
guys what type of cotton do i have to use for hashish? simple cotton from supermarket or pharmacy? or a specific most purest one?

i read that the hemp fiber can mess up with the flavour and i want the purest flavour from my concentrates (i don't like the weed sandwitch method for the same reason)

thanks.
 
Wolf46,
Winegums

Winegums

I make things from wood
Accessory Maker
Wolf46 said:
guys what type of cotton do i have to use for hashish? simple cotton from supermarket or pharmacy? or a specific most purest one?

i read that the hemp fiber can mess up with the flavour and i want the purest flavour from my concentrates (i don't like the weed sandwitch method for the same reason)

thanks.
Click to expand...
Hemp fiber does not mess with the flavour, at least it messes with it less than Cotton does. I've used both and I definitely find the hemp to be the better fibre to use. That said I use stainless steel concentrate pads in my Vapcap tip that is designated for concentrates. As long as you don't combust the SS will work for a long time with minimal need for cleaning.
 
goodpunk6

goodpunk6

Well-Known Member
Wolf46 said:
guys what type of cotton do i have to use for hashish? simple cotton from supermarket or pharmacy? or a specific most purest one?

i read that the hemp fiber can mess up with the flavour and i want the purest flavour from my concentrates (i don't like the weed sandwitch method for the same reason)

thanks.
Click to expand...

if you insist on using cotton, use organic cotton. it must be organic cotton. not other types or non organic. Otherwise, use degummed hemp fiber
 
H

herbalist33

Well-Known Member
Howdy all,
It has been far too long since I stuck my head in here, but unfortunately the release of The M caused this thread to reach critical mass for me, and keeping up to date with it became just too much of a chore. Seeing as Dynavap pretty much cured my VAS, I decided to reclaim my life and get off my smartphone, and just enjoy vaporising!

So anyone got any news for me? @Squiby ? Any new developments in DynaLand?

So a couple months ago I received a PhatGuinneaPiggie care package from the one and only @phattpiggie :

EmTVbwi.jpeg


...the main man decided I needed incapacitating and so sent me The (infamous) Triple to play with, as well as some super tasty Jamaican jerk seasoning for when the munchies hit. Note to anyone interested in the seasoning- you will NEVER get round to using it while you have the triple in your possession :nod:.

I77Pslz.jpeg


CIYzFDC.jpeg


So yep, I went missing in action for what turns out to be a couple months- the Triple seriously packs a punch!! It's literally like sucking on an enano- the density of the hit is phenomenal! The three bowls really thicken up the hits- the first time I hit the triple it knocked me on my arse, and that was after vaping throughout the day before hitting it!!

Thanks @phattpiggie, you rock!! Il be sending it back to ya next week with a little something for you to try out too:rockon:.

Loving the fact that Dynavap are still smashing it out of the water- the Omnivap put an end to my VAS well over a year ago, and these days my vaping needs are pretty much completely satisfied by the Omnivap, Vaponic and mflb. My other vapes are only broken out for special occasions. I have a much healthier herb use now that I'm not constantly looking for something to completely smash me in the face, and I owe a lot of that to Dynavap for designing such a amazing, affordable and accessible vaporiser. @VapCap you also ROCK:rockon:

I want to try to post a family photo of all my Dynavap gear when I get a chance, but for now:

sKSqjph.jpeg


Use8k98.jpeg


Peace and love y'all!
 
Aimless Ryan

Aimless Ryan

Came to read about grinders; fucked combustion
This morning after a soak in alcohol failed to get the black soot out of my Vapcap bowl I accidentally learned that if I torch the Vapcap (OG) bowl, after a while the dark seasoning comes off. Then I learned if I continue heating the Vapcap, for long enough to make the glass red hot (for a while), the screen and washers come loose/out.

Not knowing how to get that stuff back in place, I replaced the permanent screen with a plain old brass pipe screen, using the handle of an S&B brush to poke the screen into place. Test-drove with one ground. Worked splendidly.

So I figured, "Why not take out the eye-dropper-shaped thingy and see how it works?"

Worked splendidly.

Right now my Vapcap is down to a glass cylinder with a metal cap (and a pipe screen inside it), and I can't say I detect any difference versus when I use it unbroken/unmodified.

Which is fine. I'm just sharing information I thought some folks may find interesting.
 
Squiby

Squiby

Well-Known Member
herbalist33 said:
It has been far too long since I stuck my head in here. So anyone got any news for me? @Squiby ? Any new developments in DynaLand?
Click to expand...

Greetings @herbalist33. Glad that you dropped by. I have no breaking news to share, but the the new Omnivap XL was launched during the July Battery Independence Day sale along with a sexy new titanium Omni body and stem. The Omni condenser is now titanium making the Omni an all titanium feather light option. The new Omni XL weighs a mere 14 grams compared to the M which weighs in at 20 grams. It's light, beautiful, efficient and nimble.

http://fuckcombustion.com/threads/dynavap-vapcap.18853/page-662#post-1136373
 
You must log in or register to reply here.
Top Bottom