Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
flotntoke
thoroughly vaped
My VAS for others continues, but all of my 420 spending this year is for VC's and accessories! Some desire for others, but when push comes to shove DV usually gets most - if not all - of the vape budget.
Not really the place for it, but since others have brought it up, the e-nano is an amazing piece for home use. I've been using one daily for over 4 years. If you're going to be sitting down for a session within 6 feet of electricity, it's tough to beat and will out-do my OMNI with any particular technique, lighter, or material. But, you have to sit within that 6 foot range or it's just a pretty paper weight. I do occasionally play with my portables while on my own couch, but nano is vastly superior for many reasons. Check that thread for more info.
Not really the place for it, but since others have brought it up, the e-nano is an amazing piece for home use. I've been using one daily for over 4 years. If you're going to be sitting down for a session within 6 feet of electricity, it's tough to beat and will out-do my OMNI with any particular technique, lighter, or material. But, you have to sit within that 6 foot range or it's just a pretty paper weight. I do occasionally play with my portables while on my own couch, but nano is vastly superior for many reasons. Check that thread for more info.
SloJimFizz
Unknown Member
@flotntoke
I actually had to install a power plug by my vape area so's I could power up my Plenty.
But I'm a set up, break it down after, or a quick yank here and there situation right now. I'll have one sooner or later knowing me and how I handle GAS of any genre.
This did wonders last night:
I actually had to install a power plug by my vape area so's I could power up my Plenty.
But I'm a set up, break it down after, or a quick yank here and there situation right now. I'll have one sooner or later knowing me and how I handle GAS of any genre.This did wonders last night:
@flotntoke
I actually had to install a power plug by my vape area so's I could power up my Plenty.
This did wonders last night:
Nice setup!
I really need to get myself a nice glass piece to use with my VapCaps.
stark1
Lonesome Planet
exime
Well-Known Member
What's the point of the XL series? Just longer stem for cooler vapor?
SloJimFizz
Unknown Member
Thanks, love that piece.
I've got an older TI tip with some draw restriction that the bubbler can milk ten fold what I can pull with just my mouth. (That didn't sound decent)
Looking forward to the new tips.
Where are you UK/European vapcap-ers sourcing your VapCaps from? I've been intrigued for a while and to add an M to my humble arsenal seems like a no brainer! Finding one in the UK however, isn't that easy and postage/customs on a US package just makes it a little less attractive.
voodoo_vape
Vapour RebeL
This thread's pace, sometimes reminds me of the GH one.. with the major difference that here you only read praising, luvin posts and lots of appreciation..... no wonder why!!!
Finally, I made up my mind and it took me almost four whole days (less than a week owning the M) to build up my cart and finally complete it today... $500-wall broken!!
4 other friends of mine are getting hooked up as well, one of them with the Carbon OmniVap and the rest with M's! I decided to build my XLS-NonaVong with an exotic MP, instead of having an "empty" body or stem left behind ( I got a nonavong stem on my 1st order with the M.. Plus the main thing I wanted was to try out the Ti Tip as well.. I also added couple quad flame torches, after reading so many of you mentioning how quick it heats the cap. @natural farmer basically held me back from getting a whole new unit, and I thank him for that since what he suggested was my initial thinking but for some reason I just wanted to get a Ti either woody or carbon..
That way I will be approaching the whole VC chapter much more conservatively having the necessary time to enjoy each of my stoner lego toys...
and then proceed in buying some newer ones... it's worst than being a teenager and having some new video games or so....
@Squiby Amazing facts & figures you got there for DynaVap!! They're getting bigger and better every day that goes by... that's the feeling I got about them. Fingers crossed, more people will discover all this beauty hidden in such a small,cheap and simple vape!!! Hurray!!!
Finally, I made up my mind and it took me almost four whole days (less than a week owning the M) to build up my cart and finally complete it today... $500-wall broken!!
4 other friends of mine are getting hooked up as well, one of them with the Carbon OmniVap and the rest with M's! I decided to build my XLS-NonaVong with an exotic MP, instead of having an "empty" body or stem left behind ( I got a nonavong stem on my 1st order with the M.. Plus the main thing I wanted was to try out the Ti Tip as well.. I also added couple quad flame torches, after reading so many of you mentioning how quick it heats the cap. @natural farmer basically held me back from getting a whole new unit, and I thank him for that since what he suggested was my initial thinking but for some reason I just wanted to get a Ti either woody or carbon..
That way I will be approaching the whole VC chapter much more conservatively having the necessary time to enjoy each of my stoner lego toys...
and then proceed in buying some newer ones... it's worst than being a teenager and having some new video games or so....@Squiby Amazing facts & figures you got there for DynaVap!! They're getting bigger and better every day that goes by... that's the feeling I got about them. Fingers crossed, more people will discover all this beauty hidden in such a small,cheap and simple vape!!! Hurray!!!
VanCough
Environmentalist
@paddysc there are no customs charges on parcels from dynavap because the parcels are sent listed as having low value. This may be a problem if you had to reclaim a parcel via insurance but they rarely go missing in transit and I have a feeling dynavap would help reimburse you somehow if it did happen.
Also they arrive in the UK in around a week.
Source: just received my first package from them and I live in the UK
Also they arrive in the UK in around a week.
Source: just received my first package from them and I live in the UK
flotntoke
thoroughly vaped
Has anyone used Bernzomatic brand butane fuel from Home Depot? Its only $5 for the big can
I am talking about for the Dynavap branded 3 flame torch "Vertigo"
I only use Benzomatic in my larger Benzomatic torch. In general, with smaller finicky torches, I've found it better to use at least 3x filtered higher quality butane. Costs a bit more, but worth every penny for torch life and lack of hassles IME.
Check this out on eBay. Cheaper per ounce incl free shipping, and works great!
Last edited:
I feel like there should be a club of us. We could get t-shirts, except my wife wouldn't like it!
baxter
Well-Known Member
Thanks, great recommendation. I was suspicious to use the cheap Bernzomatic butane in inside my Torch lighter. I would hate to clog up the jets just to save a dollar with Bernzomatic.
Baron23
Well-Known Member
Just did this last night. Cleaned up a very gunked up OG condenser. I warmed the glass condenser in the microwave for about 20 seconds to loosen things up then pushed a small wad of hemp fiber back and forth until I got most of the reclaim.
I popped this into a dosing capsule with a liquid pad on the bottom (trying to increase conductive part of the heating) and vaped it in my Mighty at 410 F (high heat seemed to work better).
That little wad got me quite buzzed with that sedative type reclaim high.
From what I've gathered before, none of the consumer-grade butane is really that pure (pretty much all of them have impurities, no matter what they claim), so I think any can should do, as long as it isn't some super cheap sketchy one.
I'd go ahead and buy that one, since it's probably equivalent to most out there.
I've only been running it a day now but I feel compelled to show my new induction VapCap set up as it's easily been the best vaping experience I've ever had.
I recently purchased an induction heater from Pipes (skeletor format) and put it into an old tin I found that happened to be exactly the correct size for the heater. It has three 18650 batteries and by all reports should last at least 100+ sessions. This is obviously unheard of for a portable vape.
The heater heats the VapCap to click in 5 to 10 seconds (no spinning!) and the whole process is completely effortless. I just put my VapCap into the hole and wait for the click. It's actually a bit easier to hear the click now as I don't have to listen for it over the sounds of my butane lighter anymore.
I also put magnets on the lid to cool down the VapCap and on either side of the tin - one to attach the Dynastash and another to attach a small tin to store ABV. This way I have everything I need in one portable station.
I have a couple things to do still - I need to drill a hole for the power charger and I need to replace the rubber gasket around the induction heater hole as I took a chunk out of it when got caught on the sharp tin.
I was a bit concerned about putting the rubber gasket so close to the heater but there is no smell whatsoever and the rubber is completely cool to the touch during and after use. I guess it doesn't get affected by the induction heater. The tin itself seems to only ever get very mildly warm, perhaps heating up only a couple degrees.
Obviously it's not a pocketable setup but I still have my triple jet lighter for that. Anywhere else though I'll be using this heater.
This is cool, and I am NOT crapping on your construction or creativity, but I'd be a little worried about having so many 18650s in so little space that has any potential to heat up, not to mention so much potential for shorts with all that metal. I'd be looking for a plastic box or box liner of some sort, and I'd be very, very careful in the interim.
Please, vape safe!
exime
Well-Known Member
It's only $4 for Ronson Butane Fuel @ 5.82 oz at Walmart I picked some up the other day.
Last edited:
Baron23
Well-Known Member
As a long time cigar smoker (now former cigar smoker) who has used pocket torch lighters for quite some time, my experience is either pay the money for better butane or pay the money for new lighters when the jets get clogged.
Your choice, IMO.
Thats awesome! Thanks for the info VanCough!
I understand that, but 400ml Ronson here in Brazil costs ~R$16 (~U$5) while the only "pure" butane I could find is Xikar Purofine which costs ~R$100 (~U$32).
I'll probably get the Xikar later (I got one can of Ronson before knowing it was crap, so I'll use it to the end), but I can't help but wonder that maybe replacing torches would be cheaper than using the premium butane.
Vapor Loop
Well-Known Member
I only use good butane in my torches, And my cheaper torch that came with my sticky brick jr only lasted a couple months at most. I highly recommend at least getting Newport brand, That cheap stuff yall are referring to is no good.The triple Scorch I got back I august is still running strong, However the Zico I replaced the bricks torch with has now also turned into my Vapcap torch.