Dutch-Mic

Well-Known Member
am sure I'm going to cause a s--t storm here, but you guys, (posters of pictures of your vapes, bongs, wpas, whatever), are eating up my data. There is already a discussion for glass.


I don't foresee a s--t storm because the underlying logic of your proposal makes sense.
I prefer to see all the written posts and pictures in one thread, because I can find all the information and eye candy in one place.

By golly teejay you hit it on the nail. You guys aren't thinking in facts, you are thinking in "Alternative Facts" and "Fake News".:lol:

I'm from the 'there are "fake facts" everywhere and therefore I let myself also be informed by alternative media to try to falsify the potential fake facts' sub-generation. Yes, sometimes that's as tiresome as it sounds :hmm:
 

Winegums

I make things from wood
Accessory Maker
In the interest of no pictures...it's show and tell time again:lol:

I finally got some time to fiddle around with some more titanium bodies and made a discovery in my old vape parts drawer. An old titanium nail and it's 14mm female fitting. Eyeballing the diameter of the fitting got me a little excited. I wonder if I can make that fit???:hmm:

I did. The Ti 14mm adapter is friction fit to the body.

Here is a spinning Ti mouthpiece on a Ti body with a Ti 14mm GonG. So is this a TonG, or a TionG?? I'm not sure, but it sure turned out nice. Hefty too. 22.5 grams. I haven't decided about colors yet. I may leave it shiny for a while.

DMB3nMQ.jpg


And for its maiden voyage I popped my concentrate tip on there with its mesh concentrate pad I made and fired her up.
To the moon!
Happy Friday cappers!:leaf:
Wow... seriously cool! I can't wait to see some colours on that if you do torch it.
 

Vapor_Eyes

taste buds
maybe ask for an option in the software to disable pics and such?
I think this is the best option if possible. I never really thought about the data that pictures take up. At the same time, having a different thread for pictures would quickly become a huge mess in my opinion. Once you do that for this thread, it would be requested for more and more threads until almost every thread splits into two.

Would there be exceptions to posts from George? His posts often contain multiple pictures showing new products and glimpses of the inner workings at DynaVap. It would be a shame if those pictures weren't in the main thread, they serve as historical documentation of DynaVap's development.


That's brilliant! I would love a Ti VonG body for my Omni, not that I need one but it would be a cool addition to the family. I wonder if George has ever considered making one.
 

vapen00b

Many vapes & accessories. Always happy to help
Just a little heads up for those in Europe waiting for the DynaStash cases to appear online (following an earlier post from me); they're now available from us (link) in Red Cedar and Walnut :)

Great, guys!

Just a short note: the OmniVap DOES fit in the regular Dynastash.

On your site it reads :
  • For use with all DynaVap Vaporizers (excluding the Omnivap)

Am I missing something?

You should rather specify that only regular sized VCs will fit - XLs won't fit.
Don't mean to critize - just trying to help! :)


Keep up the great work. My fav EU dealer for sure! :tup:
 

GreenHopper

20 going on 60
seeing all those beautiful wood pieces makes me want to trade my OG glass unit in...
...MOTHERFUCKERS!

here is MY review though

Great review!

My fave parts were the cons:

  • "If you like to vape nude and set things down in your lap" :lol:
  • "If you've recently been convicted of arson":rofl:
  • "If you live with someone who uses an oxygen tank" :lmao:

Thanks for the lolz, also did I mention...really great review.:D
 

Bad Ocelot

Well-Known Member
Been fiddling with my hash setup for the vapcap again lately & have landed on a pretty reliable & easy configuration. Currently I'm putting a black ceramic donut wick (from w9) on top of a Ti CCD, flattening my pressed hash into a thin disc to maximize surface area & then topping it off with a small piece of a Ti mesh screen to hold the hash in place. The black ceramic bit retains heat a bit so cool down time is slightly longer, but I can sometimes get an extra hit out of a heating cycle, ymmv.

This is for the glass tips, I think the interior diameter of the Ti tips might be slightly larger so dunno if this would be as effective in one of those. Hopefully I can fit a Ti tipped VC in my vape budget soonish!
 

snamuh

ghost
Been fiddling with my hash setup for the vapcap again lately & have landed on a pretty reliable & easy configuration. Currently I'm putting a black ceramic donut wick (from w9) on top of a Ti CCD, flattening my pressed hash into a thin disc to maximize surface area & then topping it off with a small piece of a Ti mesh screen to hold the hash in place. The black ceramic bit retains heat a bit so cool down time is slightly longer, but I can sometimes get an extra hit out of a heating cycle, ymmv.

This is for the glass tips, I think the interior diameter of the Ti tips might be slightly larger so dunno if this would be as effective in one of those. Hopefully I can fit a Ti tipped VC in my vape budget soonish!
I've used a W9Tech ceramic donut piece and a half of one of there ceramic rods from their atomizer... Topped with a CCD. Worked good but I'm using hemp fiber now.

I got one of W9Tech new Sirius atomizers and it looks like its a thicker ceramic donut. Like the height of 2 or 3 regular donuts stacked... Once the atomizer fucks up I'll try it in the VC with a w9 ceramic rod in the middle...

I feel like dab and isolate are fussy to vape regardless of the device. I wish I had an easier time with it... I can never get the temp right. I'm starting to just flame the tip with isolates.

Btw the donuts fit a bit loose in my new tip. From memory...It would probably use one or two wraps of mesh for a solid fit?
 

alltoreup

Damn you, party liquor
I've been using a storz and Bickel concentrate pad cut to size. I find it works much better than the hemp fiber as it has more area to melt into and then vaporize. You can probably make 8 or so of the pads from one order of 4 discs but I'm still on my first one. It torches clean fairly easily and is taste neutral afterwards. I have a domed screen to sandwich in the shatter or wax to keep it off the cap.

I've been using non full melt hash with just a CCD installed.

I hope George has some concentrate pads or some solution in our future. All those titanium shavings and all...
 

Bad Ocelot

Well-Known Member
I've used a W9Tech ceramic donut piece and a half of one of there ceramic rods from their atomizer... Topped with a CCD. Worked good but I'm using hemp fiber now.

I got one of W9Tech new Sirius atomizers and it looks like its a thicker ceramic donut. Like the height of 2 or 3 regular donuts stacked... Once the atomizer fucks up I'll try it in the VC with a w9 ceramic rod in the middle...

I feel like dab and isolate are fussy to vape regardless of the device. I wish I had an easier time with it... I can never get the temp right. I'm starting to just flame the tip with isolates.

Btw the donuts fit a bit loose in my new tip. From memory...It would probably use one or two wraps of mesh for a solid fit?

Interesting, haven't seen the sirius. And yeah, all my shatter, co2 oil, etc goes in either a DT 3.0, 2.7, or the enail. Anything else has been a frustrating waste. The black donuts are a tad loose in there, but with the Ti mesh on top everything holds in place quite well.

I've been using a storz and Bickel concentrate pad cut to size. I find it works much better than the hemp fiber as it has more area to melt into and then vaporize. You can probably make 8 or so of the pads from one order of 4 discs but I'm still on my first one. It torches clean fairly easily and is taste neutral afterwards. I have a domed screen to sandwich in the shatter or wax to keep it off the cap.

I've been using non full melt hash with just a CCD installed.

I hope George has some concentrate pads or some solution in our future. All those titanium shavings and all...

Second on native VC concentrate pads. Would be heavenly! Still haven't gotten around to using the hemp fiber i bought, may yet come up with a purpose for it.
 

GreenHopper

20 going on 60
Here's the latest custom work I've done, by far the most complex and difficult. It's a fret board stem for @GreenHopper made from stinkwood, nickel and deer horn. I'm really proud of this piece. He's definitely going to hit the "high" notes when he uses this one. :rockon:

290ppjm.jpg

I'm gonna play 'stair way to heaven' on it, 'vape on the water', all the classics, all night, this things getting turned up to 11 :D
 

almost there

Well-Known Member
Here's the latest custom work I've done, by far the most complex and difficult. It's a fret board stem for @GreenHopper made from stinkwood, nickel and deer horn. I'm really proud of this piece. He's definitely going to hit the "high" notes when he uses this one. :rockon:

290ppjm.jpg
It almost looks alive, like some cyborg caterpillar that spits euphoric vapor out its mouth:evil:
 

Tommy10

Well-Known Member
Little apprehensive as to how low you can torch, OG for me was basically as long as you don't go lower than the cap you'll be fine. Seems a bit different on the VonG can lower than the cap a bit with no burning yet. Really don't want to accidentally combust and stain my timber.
 

Prolusio

Well-Known Member
Green envelope finally arrived today! Man I got some beautiful stuff this time. B&W ebony Nona with Ti spinning mouthpiece and engraved cap.

2 stems from @phattpiggie, Purpleheart and Lignum Vitae squares. The grain on both are unreal! Hard for my lacking skills to capture in picture but they're the kind of thing you just wanna hold and turn about in your hands even when you're not using them. got 2 Ti glassy, with engraved caps, so I can properly equip them.

Then I also recieved a stem from @Winegums in today; beautiful figured walnut with a steel core. Has such a nice weight to it! It feels very premium and it's super easy to add or remove the condenser for frequent outfit changers! But I guess that's not really necessary with a steel lining.. Anyway, Pics incoming!

Da Squares
aisfpDK.jpg


Figured Walnut with Steel Core
GOktJan.jpg

Another @Winegums Vong Stem I got a few weeks ago and the B&W ebony Nona
cDRcwxj.jpg


The Engravings. Posted them in the laser engravings thread with more details and the images I selected.
1aP0lFp.jpg


Family Photo
xLxnrqn.jpg
 
Top Bottom