pop22

Well-Known Member
I just recieved a Tectonic stem! I popped the tip from my 2020 M onto it, shut down both airports and gave it a test. Droppit into the IH and stirred it until click. It has very easy airflow. First hit gave visible vapor. Second and third hits were clouds! And that's with the vents closed! Yes it may be that it leaks air, but if so, it's doing it in the right place. The draw was very easy and I pack my tip. I'm pleased with it!

There are no o-rings on this stem. The cooling tube screws into the upper area of the stem, just below the mouth piece.

Screenshot from 2021-11-23 11-12-21.pngTectonic Stem pic1.jpg
 

pop22

Well-Known Member
And my cap turned black and blue the first day I used it...... but it works just fine. Funny, my 2015 Vap Cap with the glass stem, the cap still looks like new ( and still works! ).
 

stonedmallone

Well-Known Member
Sitting here telling myself I don't need a revolve stem because I have a MVS ....

I don't need it... I don't need it...
Bikini Bottom Water GIF by SpongeBob SquarePants
 

Jimmer144

Sargeant REG
Thinking of pulling the trigger on the Dynatech Apollo 2 IH. Do you think its worth it? I mainly use my M thru a waterpipe or bubbler. To me this device is best thing there is for micro-dosing and stretching your product out to the max. And there is just something about the vape signature that i just adore, it leaves me contented and less likely to overuse in a session unlike other units.
 

RustyOldNail

SEARCH for the treasure...
Sitting here telling myself I don't need a revolve stem because I have a MVS ....

I don't need it... I don't need it...
Bikini Bottom Water GIF by SpongeBob SquarePants

I have two EXPENSIVE Simrell stems, I like them, I don’t use any metal Dynavap stems, just the glass ones for water rigs. When the black resolve stem is readily available, and the price is right, I’ll try one, probably next year.
 

b0

Cloudy...
I have two EXPENSIVE Simrell stems, I like them, I don’t use any metal Dynavap stems, just the glass ones for water rigs. When the black resolve stem is readily available, and the price is right, I’ll try one, probably next year.
Seems like launch price is cheaper, may be worth it! I have an MVS too and an M21 with performance kit but I may buy a Revolve aswell, really like the design and options.
 

Antrim50

Active Member
I've got a new favorite way to consume hash. I was having trouble finding an effective way to vape it. A chunk in the DV doesn't have enough surface area, so even at reclaim-boiling temps I'd only get thin vapor along with my blackened oven. I tried rolling it into a little snake, then pressing that around the top of a Dyna-coil, with only slightly better results.

The winning technique is to roll it out flat, ideally close to rectangular, then curl the flattened piece into a cylinder. I use a piece of 4mm stainless pipe to roll it out and to form the cylinder. Drop that into the oven so that it stands up, and it presents a huge amount of surface to absorb heat from the walls of the oven. I heat it vertically, in the bubbler, with the Ispire Wand. The result is big clouds of tasty hash vape. I like this more than any technique I've used so far, including combustion classics like hot knives or hash under glass.iView attachment 14540

I've got a new favorite way to consume hash. I was having trouble finding an effective way to vape it. A chunk in the DV doesn't have enough surface area, so even at reclaim-boiling temps I'd only get thin vapor along with my blackened oven. I tried rolling it into a little snake, then pressing that around the top of a Dyna-coil, with only slightly better results.

The winning technique is to roll it out flat, ideally close to rectangular, then curl the flattened piece into a cylinder. I use a piece of 4mm stainless pipe to roll it out and to form the cylinder. Drop that into the oven so that it stands up, and it presents a huge amount of surface to absorb heat from the walls of the oven. I heat it vertically, in the bubbler, with the Ispire Wand. The result is big clouds of tasty hash vape. I like this more than any technique I've used so far, including combustion classics like hot knives or hash under glass.View attachment 14540
I've always been fine with lots of small pieces inside some unbleached cotton. Is your cylinder of hash wrapped in that or just naked?
 
Antrim50,

Cannabiker

Well-Known Member
@Cannabiker have you tried putting a glass or quartz bead in the bowl and then putting the hash on top of it? It works pretty well
I haven't tried that. I shouldn't be surprised that's a technique--it's all about the balls these days. I'll have to give it a try. I wonder if a ball bearing would work even better--I use an IH, so a steel ball should heat up independently of the oven.

I've always been fine with lots of small pieces inside some unbleached cotton. Is your cylinder of hash wrapped in that or just naked?
It's naked. I've never been comfortable with the hemp/cotton fiber concentrate technique. I tend to push my DV beyond the click with concentrates, and I worry that I might get into fiber-burning territory.
 

Antrim50

Active Member
I haven't tried that. I shouldn't be surprised that's a technique--it's all about the balls these days. I'll have to give it a try. I wonder if a ball bearing would work even better--I use an IH, so a steel ball should heat up independently of the oven.


It's naked. I've never been comfortable with the hemp/cotton fiber concentrate technique. I tend to push my DV beyond the click with concentrates, and I worry that I might get into fiber-burning territory.
I know what you mean, I had a faulty cap once that didn't click and i inhaled a mass of smouldering cotton which wasn't nice. But generally it gets a bit beige in spots but doesn't remotely singe.
 
Antrim50,

TheThriftDrifter

Land of the long vapor cloud
Thinking of pulling the trigger on the Dynatech Apollo 2 IH. Do you think its worth it? I mainly use my M thru a waterpipe or bubbler. To me this device is best thing there is for micro-dosing and stretching your product out to the max. And there is just something about the vape signature that i just adore, it leaves me contented and less likely to overuse in a session unlike other units.

Recently bought an Ispire wand which I am impressed with. It's not specifically made as a dynavap heater but works real good at milking the golden gravy from yah dynavap, it's reasonably priced too. :spliff:

If you are USA based it would be worth considering one of Pipes heaters.

Peace.
 

Alexis

Well-Known Member
Recently bought an Ispire wand which I am impressed with. It's not specifically made as a dynavap heater but works real good at milking the golden gravy from yah dynavap, it's reasonably priced too. :spliff:

If you are USA based it would be worth considering one of Pipes heaters.

Peace.
Hi man. No often see these years huh? So just now, I was heading here promptly.

Now ever since I joined this forum six years ago nearly I have always had the most pleasant feeling about visiting this thread in particular it has remained continuously harmonious and peaceful so live and let live no dramas ever and so many really cool people from all backgrounds so I've always felt so comfortable about dropping in here once in a blue moon.

But to see that you had yourself just recently posted just confirms that and demonstrated it again- "the good sort" inhabit these parts.

Please excuse my primitive terminology atm lol. Pretty cained. Lots wicked Kava from Fiji + Vanuatu islands, + lots lovely weed too. 🙂

Aside. I'm seeking some possible direction and advice and maybe a little sense because I'm perhaps a little too hammered this evening to figure this out until tomorrow.

I plan to buy myself and Ispire wand to use with my Omnivap. Hopefully this weekend if vapefiend put on a Black Friday sale.

I just searched for the thread for the ispire.

I found one where it was closed for further replies.

I don't actually need any information to make a decision on that I only wished to ask if anybody has a recommendation for a suitable 18 650 battery charger?

Something which has basically been...good? Lol, I told you my words will be primitive right now guys.

For somebody who might have purchased something that's all because I want to get one of those in at the same time and I couldn't see one on fake friends website just now either specifically stating 18 650 charger so I wasn't sure if the Ispire unit itself actually Re-charges the batteries?

You lot here for gift that time as well are so equipped with knowledge and experience on all things related to these matters any simple words of direction would be really appreciated but this is no serious matter I'm just seeking any really top recommendations and just some assurance about what is actually the case here in case I've missed one of two things.

Really hoping everybody here is doing well and it gave me an excuse to drop in here at last.

i do miss seeing @Squiby around. She virtually launched this thread back in 2016 with her passion for the Vapcap saw its potential from the start. And she was a real golden influence around here are true genuine person as well very intelligent I do hope she's okay in life and simply moved on which I suspect is to be the case.
 

cybrguy

Wear A Fucking Mask!
I don't actually need any information to make a decision on that I only wished to ask if anybody has a recommendation for a suitable 18 650 battery charger?
I like Nitecore and XTAR for chargers. Have a D4 from Nitecore and a VC4L from XTAR, both 4 bangers and I'm happy with both. There are other options from both vendors that have more options, but these basic chargers have worked well for me.

Squiby doesn't seem to come in here anymore but she is a mod over in the other place if you would like to see her.
 

Steamer

Well-Known Member
It's naked. I've never been comfortable with the hemp/cotton fiber concentrate technique. I tend to push my DV beyond the click with concentrates, and I worry that I might get into fiber-burning territory.
You're actually pretty safe with an IH, torching might create hotspots and give you a dry hit from hell:puke: I've started to use cotton for my full melt hash and it keep the oven and cap nice and clean, no dry hit and I heat for 2 seconds past the click (21M tip).
 

Alexis

Well-Known Member
I like Nitecore and XTAR for chargers. Have a D4 from Nitecore and a VC4L from XTAR, both 4 bangers and I'm happy with both. There are other options from both vendors that have more options, but these basic chargers have worked well for me.

Squiby doesn't seem to come in here anymore but she is a mod over in the other place if you would like to see her.
Hello mate I do hope you are well firstly.

Maybe I will say hi I'll see energy has been a bit low of late so I've been kind of lying low myself.

But I can tell you that really please play to hear that she's basically okay like I hoped I just didn't assume and haven't heard anything and really wished that she is still pottering about in her lovely garden or so and hopefully finding comfort in life.

So thanks very much for sharing that especially. She is a great soul I reckon I swear. She understands things and she's got such a good attitude towards others as well very excepting.
Thanks also very much for the charger advice I will look at those now I'm not fussy about it but I figured loads of people here will know of simple, effective reliables.

Thanks man. Hope you've been having a good night too.

I enjoyed a series of Vapcaps tonight, before just now a good Sativa load on the Herborizer DigiTi.

I am looking forward to the upgraded vapcap experience though, by sll accounts seen, with the ispire.

Just watching for Vapefiend to drop their deal.

Im guessing Friday. 👍
 

GoldenBud

Well-Known Member
You're actually pretty safe with an IH, torching might create hotspots and give you a dry hit from hell:puke: I've started to use cotton for my full melt hash and it keep the oven and cap nice and clean, no dry hit and I heat for 2 seconds past the click (21M tip).
full melt hash that requires storing in the fridge because it's too sticky? I'd recommend a Ti tip so much.... I got higher from less amount, and the taste was so good each hit....
 

Cannabiker

Well-Known Member
@RogueGuy--Thanks for the inspiration! I was thinking about how to use balls with hash in my DV, and I figured it would be best to pre-heat, since glass beads take a while to heat-soak. Then I thought about steel balls. They won't work like glass/ruby/ceramic in most applications since they don't hold heat as long, but I thought they might respond to an IH, and, if they did, they'd do it quickly. I think it worked. I used a single, quarter-inch ball bearing. I wrapped it in hash like a little dumpling and dropped it in the oven. It was spectacular. I believe the IH did juice up the bearing, that it wasn't just heat from the oven. I'll have to experiment some more, in the name of science.

IMG_3887_small.JPGIMG_3891 (2)_small.JPG
 

daeso393

New Member
What do y'all think of the adult table bundle as an entry point? That seem like a good deal?

 

Alexis

Well-Known Member
The wand will recharge the batteries using a USB-C cord. I wish I could help you with a charger suggestion, but I just got used to plugging mine in the wall with an Apple adapter.
Hi. I missed this last night thanks. I assumed it might as no real suggestion anywhere for needing a separate charger.

So that's useful. Cheers.
 

Squidge

Well-Known Member
Hi man. No often see these years huh? So just now, I was heading here promptly.

Now ever since I joined this forum six years ago nearly I have always had the most pleasant feeling about visiting this thread in particular it has remained continuously harmonious and peaceful so live and let live no dramas ever and so many really cool people from all backgrounds so I've always felt so comfortable about dropping in here once in a blue moon.

But to see that you had yourself just recently posted just confirms that and demonstrated it again- "the good sort" inhabit these parts.

Please excuse my primitive terminology atm lol. Pretty cained. Lots wicked Kava from Fiji + Vanuatu islands, + lots lovely weed too. 🙂

Aside. I'm seeking some possible direction and advice and maybe a little sense because I'm perhaps a little too hammered this evening to figure this out until tomorrow.

I plan to buy myself and Ispire wand to use with my Omnivap. Hopefully this weekend if vapefiend put on a Black Friday sale.

I just searched for the thread for the ispire.

I found one where it was closed for further replies.

I don't actually need any information to make a decision on that I only wished to ask if anybody has a recommendation for a suitable 18 650 battery charger?

Something which has basically been...good? Lol, I told you my words will be primitive right now guys.

For somebody who might have purchased something that's all because I want to get one of those in at the same time and I couldn't see one on fake friends website just now either specifically stating 18 650 charger so I wasn't sure if the Ispire unit itself actually Re-charges the batteries?

You lot here for gift that time as well are so equipped with knowledge and experience on all things related to these matters any simple words of direction would be really appreciated but this is no serious matter I'm just seeking any really top recommendations and just some assurance about what is actually the case here in case I've missed one of two things.

Really hoping everybody here is doing well and it gave me an excuse to drop in here at last.

i do miss seeing @Squiby around. She virtually launched this thread back in 2016 with her passion for the Vapcap saw its potential from the start. And she was a real golden influence around here are true genuine person as well very intelligent I do hope she's okay in life and simply moved on which I suspect is to be the case.
Grab yourself an Xtar charger from Fogstar They're currently offering 25% off site wide. I'd also recommend picking yourself up a couple of Molicel P26As at the same time. 👍

I don't work for them, but have been a happy customer for years.
 
Top Bottom