Dynavap VapCap

[fatbiker]

Do you prefer a single, double, or triple flame torch? Please provide your favorite torch. I need some help selecting one.

 

[TommyDee]

0=IH

 

[mucsusn]

Had an interesting experience today. Crops are being harvested locally. Was asked to
Help trim buds.

Spent a few hours doing so. Chilled, with some beers, and cured sativa, while shooting the breeze.

Sixty buck$, and a half oz of the sativa, for a couple of hours work under the Fall sun.

My “M” is gonna be busy tonite, @ataxian!

That sounds cool as shit!

 

[TheThriftDrifter]

Do you prefer a single, double, or triple flame torch? Please provide your favorite torch. I need some help selecting one.

Triple flame Jobon, good for fast heat up, good size tank, work well outdoors.

https://www.ebay.com/itm/Windproof-...ispr=1&hash=item340dd6d46c:g:4l8AAOSwSQRdGB58

Single flame Honest, more accurate/control, reliable and cheap, big tank.

https://www.ebay.com/itm/Honest-Ref...627352?hash=item340d9c0218:g:3EsAAOSw2sFdE4bn

But my favourite are the small Aomai, very controllable, super nice to use, style in spades, downside is they have a rather small tank.

https://www.ebay.com/itm/Silver-Jet...090239?hash=item1cb2dfb77f:g:CJMAAOSwBdRbUPOm

Haven't tried a two flame yet.

 

[cybrguy]

Do you prefer a single, double, or triple flame torch? Please provide your favorite torch. I need some help selecting one.

Believe it or not Amazon has a few good choices in triples right now including the ever popular Vertigo Cyclone

This is a good place to find lots of opinions
http://fuckcombustion.com/threads/w...se-with-the-vapcap.23318/page-38#post-1411403

 

[stark1]

“Day-o, day-o
Daylight come and me wan' go home “

Oops. Back to reality

 

[TheThriftDrifter]

It's all good over here.

It's that wonderfull time.

It's happy hour!



Got to say, what a fine and enjoyable Little piece of stainless steel.

Heat once heat twice then twice again = Smile on the dial.

 

[Squiby]

Eye of the beholder an all..



I'm sure (if requested) @Aezhenn could make a longer stem that would cover the glass fully.. only issue is you'd have to poke the insert out from the tip end if you wanted to remove for cleaning

I love your @Aezhenn stem and the IH!! Can you tell us more about your IH? Is it a @phattpiggie creation? What IH is inside?

 

[Support@lamart]

Thanks @Squiby ! That's right, it's the work of @phattpiggie , using a skelly from @Pipes .. it's a desktop.. very small tho



Heatup times pretty rapid

 

[ataxian]

Thanks @Squiby ! That's right, it's the work of @phattpiggie , using a skelly from @Pipes .. it's a desktop.. very small tho



Heatup times pretty rapid

Very nicely made!

 

[Moses Baca]

Wow! Stunning combination of IH and stem!

"1 OF YOUR 5 A DAY"

Umm...5 cans of chick peas a day?

 

[stark1]

mr tallyman tally me banana, Mr Moses, I dinna think you could 2B so funny.

Just call me gassy, used to have a golden retriever who was so gassy we called her Sassy.

Loved that friend, from pup, to passing.

Here’s a toke to ya, Sass!

 

[TheThriftDrifter]

Thanks @Squiby ! That's right, it's the work of @phattpiggie , using a skelly from @Pipes .. it's a desktop.. very small tho



Heatup times pretty rapid

What a beautiful combo.

 

[fachada]

How could we miss this?

Broad City's Ilana Wexler hitting a Shadow 'M'!??? That's HUGE!

Season 5, Episode 1, ~12:06

 

[cybrguy]

Thanks @Squiby ! That's right, it's the work of @phattpiggie , using a skelly from @Pipes .. it's a desktop.. very small tho

What a lovely combination. That is my favorite of all skelly containers and a beautifully mated VC.
Add garbonzo beans for hummus or falafel and we are headed for a very nice day...

 

[Vape weed everyday]

I like the omnivap as it is.

I turn the condenser so is about 70% open just enough to cover the thread in the screw.

Fully open I find too open and no airport I find too restricted.

Also I noticed if I do use airport compared to set it and forget it that I get more hits but they are lighter. Set it and forget I get denser hits and the load caches in less hits.

My setting I can do lung busting pulls that stay cool. I heard you can use the arizer stems as a dynavap stem, my beloved air/solo is what made me fall in love with vaping but now its just too weak compared to dynavaops but i may try just it for the nostalgia of hitting an arizer stem.

 

[John Coaltrain]

. . . I heard you can use the arizer stems as a dynavap stem . . . .

Just tried this for size on my Solo II stems. Neither end accommodates a DynaVap tip. It's not even close.

 

[thejackalsmark]

I like the omnivap as it is.

I turn the condenser so is about 70% open just enough to cover the thread in the screw.

Fully open I find too open and no airport I find too restricted.

Also I noticed if I do use airport compared to set it and forget it that I get more hits but they are lighter. Set it and forget I get denser hits and the load caches in less hits.

My setting I can do lung busting pulls that stay cool. I heard you can use the arizer stems as a dynavap stem, my beloved air/solo is what made me fall in love with vaping but now its just too weak compared to dynavaops but i may try just it for the nostalgia of hitting an arizer stem.

Everything sounds just right with your Omni. Glad to hear you're loving it!

Just tried this for size on my Solo II stems. Neither end accommodates a DynaVap tip. It's not even close.

I could actually swear I had heard that too, about one of the Arizer mouthpieces or stems fitting a dynavap tip. Perfect guy to ask about that.... @RogueGuy!
Is there one of those to your knowledge that fits a dynavap tip?

Happy Vaping!

 

[John Coaltrain]

I could actually swear I had heard that too, about one of the Arizer mouthpieces or stems fitting a dynavap

It could be that it fits the ArGo stem.

 

[stark1]

1. Just tried this for size on my Solo II stems. Neither end accommodates a DynaVap tip. It's not even close.

The OD of a tip is 8mm. The 10mm body/stem fits INTO an Arizer stem.
—As you said, a tad large for a tip to seat properly



16d6


Also a no go for an Argo mouthpiece





However, an RWW stem will work (with some adaptive O-Rings)


middle name for Ilana Glazer

 

[John Coaltrain]

The OD of a tip is 8mm. The 10mm body/stem fits INTO an Arizer stem.

So does that verify what I was addressing, namely:

. . . I heard you can use the arizer stems as a dynavap stem. . . .

 

[stark1]

One can try....

(A silicone tube section with 8mm ID/10.75mm OD (if they come in those dimensions)
Should be a fit. I’d rather get a couple of durable RWW stems?).


PS I got 3


“Six foot, seven foot, eight foot bunch
Daylight come and me wan' go home”

 

[John Coaltrain]

One can try....

That's the spirit!

 

[Verax]

Thanks @Squiby ! That's right, it's the work of @phattpiggie , using a skelly from @Pipes .. it's a desktop.. very small tho



Heatup times pretty rapid

Stem is gorgeous as per usual for @phattpiggie . That IH though! Just gorgeous!

 

[ataxian]

The OD of a tip is 8mm. The 10mm body/stem fits INTO an Arizer stem.
—As you said, a tad large for a tip to seat properly



16d6


Also a no go for an Argo mouthpiece





However, an RWW stem will work (with some adaptive O-Rings)


middle name for Ilana Glazer

I use 2 measure everything!

GDP were I reside is fire in 2days lingo?

“M” is perfect and better than paper joint’s 4-some?