sweetvapor12

Well-Known Member
My M has arrived! I gotta say, it lives up to the hype I built up while waiting! I don't want to go too deep right now because I've been thoroughly testing this and I can barely keep my eyes open:D

I only have a few machines but this is so far the cheapest and gets me the highest the fastest!

Mine will be here Monday /psyched!
 

tblast

Well-Known Member
Does anyone know if the condenser that comes with the 2019 M is titanium or stainless steel? What about the Karmavap? All I see in the material is “standard condenser” and I assume that refers to the size as opposed to the metal.

Also, is there any noticeable difference between the newer Ti condensers and the older SS condensers?

Sorry if this has been answered before, I didn’t have much luck with the search function as this thread has become so massive!

Thanks!
 

Anzac Evo

Member
2019 m come with EVERYTHING SS bro.as for condencers ti a wee bit lighter and doesnt hold heat for as long.but hard not notice and real difference.but u can heat treat ur own ti pieces with a tourch to change colours.but beeing inside i dont ever realy see it.karmavap was for preorder 2019M's DV gave 2018 m's away for people to give out for free for the community to try a DV M.and u have standard ss and xl ss cond and standard ti and xl ti cond standard omin xl omni if that helps.

Does anyone know if the condenser that comes with the 2019 M is titanium or stainless steel? What about the Karmavap? All I see in the material is “standard condenser” and I assume that refers to the size as opposed to the metal.

Also, is there any noticeable difference between the newer Ti condensers and the older SS condensers?

Sorry if this has been answered before, I didn’t have much luck with the search function as this thread has become so massive!

Thanks!
Read above.sorry new to this forum thing
 
Last edited by a moderator:

tokercoder

Well-Known Member
I just thought I would drop this here. A local artist did some work on my OmniXL. I love what they did. Check out: https://flyaway-toys.myshopify.com/

Awesome work! Bookmarked.

An idea for 'spinny mouthpiece' people: I have wondered about getting an appropriately sized "fidget spinner" sort of ball-bearing setup and having it integrated into a custom stem by one of the well-known custom stem makers. In appearance, the stem (as I imagine it) would have a silver ring somewhere on the body but the ring itself would spin. No visual indication of that unless the outside of the ring was engraved or something. This would allow use of an Omni setup but you still have a spinning piece.

I don't know if you can already find fidget spinner pieces online in sizes that might accommodate vapcap stem part size and fit requirements, but I bet Flyaway could help create something that is easily fitted to wood bodies under construction, given their current stock.

For that matter, a standalone spinner part that would fit Omni setups between the condenser end and adjustable mouthpiece such that it doesn't interfere with any other sorts of customization like custom stems or bodies, would be really neat. I know a lot of people like 'spin' so I bet a standalone "spinner extension" would sell very well.

Anyone who thinks it's worth running with those ideas to investigate further, please do. Someday I'll be glad to be able to purchase the result!

Edit: This too!

The bead works perfectly for the heat cycle spin. The bead sits very nicely between my thumb pad and index finger pad.

A standalone spinner part that could connect between the tip and stem/body. Maybe a width that would allow use of a standard body with XL condenser, with the spinner filling in the created gap!

Edit2: Anyone seen these anodized damascus Ti pieces on Etsy? Other sizes available too. Imagine the possibilities!!! Don't know how easy it is to find stock like that anywhere else.

https://imgur.com/OEmMlex
OEmMlex
 
Last edited:
tokercoder,
  • Like
Reactions: ataxian

Anzac Evo

Member
Awesome work! Bookmarked.

An idea for 'spinny mouthpiece' people: I have wondered about getting an appropriately sized "fidget spinner" sort of ball-bearing setup and having it integrated into a custom stem by one of the well-known custom stem makers. In appearance, the stem (as I imagine it) would have a silver ring somewhere on the body but the ring itself would spin. No visual indication of that unless the outside of the ring was engraved or something. This would allow use of an Omni setup but you still have a spinning piece.

I don't know if you can already find fidget spinner pieces online in sizes that might accommodate vapcap stem part size and fit requirements, but I bet Flyaway could help create something that is easily fitted to wood bodies under construction, given their current stock.

For that matter, a standalone spinner part that would fit Omni setups between the condenser end and adjustable mouthpiece such that it doesn't interfere with any other sorts of customization like custom stems or bodies, would be really neat. I know a lot of people like 'spin' so I bet a standalone "spinner extension" would sell very well.

Anyone who thinks it's worth running with those ideas to investigate further, please do. Someday I'll be glad to be able to purchase the result!

Edit: This too!



A standalone spinner part that could connect between the tip and stem/body. Maybe a width that would allow use of a standard body with XL condenser, with the spinner filling in the created gap!

Edit2: Anyone seen these anodized damascus Ti pieces on Etsy? Other sizes available too. Imagine the possibilities!!! Don't know how easy it is to find stock like that anywhere else.

https://imgur.com/OEmMlex
OEmMlex
Ti damascus dont thing its real mate.didnt know there was such a thing.plus in the first pic it says 4 aloy meaning 4 main metals possibly more mixed together.
 
Anzac Evo,
  • Like
Reactions: ataxian

tokercoder

Well-Known Member
Ti damascus dont thing its real mate.didnt know there was such a thing.plus in the first pic it says 4 aloy meaning 4 main metals possibly more mixed together.

Yeah, and so expensive. Nice for bodies and accessories though if it was better priced.
 
Last edited:
tokercoder,
  • Like
Reactions: ataxian

DonnaMo

Well-Known Member
I'm really hesitant to post too much as I might come off as spamy. I'm just so damn proud of my new stem & also proud and happy for @khelek41girl

Check this out! Got it in the mail today and took it for a spin :rofl:

20190412-162342.jpg


20190412-161852.jpg


20190412-162157.jpg


The bead works perfectly for the heat cycle spin. The bead sits very nicely between my thumb pad and index finger pad. The length has a nice balance to it, not sure if you intended this but it works well so as to not feel like I'll lose control during the heat cycle. The final mouthpiece taper is a nice minute detail that works with the lips. The teak wood had an unexpected cooling effect (my first custom wooden long stem so there's that). It was very nice. Surprisingly, zero teak flavor. I expected a tiny amount at the very least. Nope. Not that I'm complaining. The wood has some serious character. The grain is beautiful. I expect to stare at it a lot more this evening :brow: :cool:

Happy Friday everyone!
That is one very nice vape. Where did you pick it up? Congrats!
 

cybrguy

Putin is a War Criminal
I am gonna put out one more request for people to stop using IMGUR and inconveniencing everyone else for no reason. Come on, folks, it isn't brain science. IMGUR has gone out of their way to blacklist this site and screw us. Please don't help them, just use another hoster.

Where is that damn coffee cup. And get off my lawn...

15eybeb.jpg
 
Last edited:

-dab8-

Dyna-saur
At the risk of sounding like a first time enhancement smoker/vaper, do you ever have a cap full before a shower just because? I hadn’t. In all my life.

The central air conditioner was set just slightly too cold, in anticipation of the soon to be 77° temperature outside. The water was almost a touch too hot, and dispersing perfectly from the new shower head, a wide diameter mix of stream and spray.

I think I stood under the water for 20 minutes.

So!

Now that I know they pair so well together, it seems clear that Dynavap needs to make some shower accessories. I think a capman shaped loofah sponge, Omni shaped shampoo bottles, an M shaped soap dispenser with a waterproof dynastash soap tray, etc. Bonus points for a DynaVap branded towel.
 

cybrguy

Putin is a War Criminal
Understood. New here, didn't know about imgur. Thank god it isn't brain science! :)
Ahhh no worries. In truth that expression, brain science or brain surgery, has lost a lot of it's credibility since we all learned about Ben Carson. I think we need to go back to rocket science or something...
a capman shaped loofah sponge,
Oooo, I like that idea. On a stick please...
 

Monk Debate

The monks do be debatin’
The Dynavap may be the ultimate microdoser. I tear off just one or two small nugs of flower, throw it in the bowl, heat it up and immediately get hit with great vapor. I get two sessions out of it, about three hits per session, and the nugs are evenly and thoroughly browned afterward.
 

ataxian

PALE BLUE DOT
I am gonna put out one more request for people to stop using IMGUR and inconveniencing everyone else for no reason. Come on, folks, it isn't brain science. IMGUR has gone out of their way to blacklist this site and screw us. Please don't help them, just use another hoster.

Where is that damn coffee cup. And get off my lawn...

15eybeb.jpg
Funny 4 sure?
Espresso 4 some!
Sock juice 4 other’s!

“M” 4 some?
TI 4 other’s?

Pick your style?

Seriously I haven’t posted a photo 4 the longest time.
What site can one use?
IMGUR banned FC?
 
Last edited:

paehtod

Well-Known Member
M19 & karma M & glass charlie cooling stem arrived Hong Kong~

291m4k9.jpg


The glass stem(XXL) is really fun, you can see the reclaim just after 1 day, i hit it a lot:)

I was very interested to the M19 new Z groove SS tip, but i found out the New Ti tip have better air flow, may be the M18 also better? Need more time to test:D And the new green tube is very nice too~ I like it~
 

Ramahs

Fucking Combustion (mostly) Since February 2017
Well, unfortunately I've already broken that @glass_charlie stem I received a week ago :doh:

IMG-0734-2.jpg


I was removing the tip to clean the glass, and it broke. It's probably my fault, as I think that when twisting and pulling straight out like I should I may have accidentally let it wiggle to the side a little, and that's what caused the breakage.

Anyway, a tiny piece of tape to hold the glass in place, and some tightly wrapped hempwick, and it's useable again! Yay me :clap:

And, it actually doesn't look too bad like this!
IMG-0737.jpg
 
Last edited:

Ramahs

Fucking Combustion (mostly) Since February 2017
Last edited:

muunch

hotboxing the cockpit
Last edited:
Top Bottom