Dynavap VapCap

[stark1]

This didn't happen during my service overseas. This is a new injury ...

I don't wanna go too far off topic... But.. A good friend, accidentally, shot me in the foot... Good times

Here's the before/ after surgery image... with my pain reliever lol

Gosh. You have long toe bones, looks long like a hand. No thumb. Haha.

(Still searching for the stashes)

Wait! Thought you got an OG Omni from Mucsusn.....

 

[WoodVillain]

Gosh. You have long toe bones, looks long like a hand. No thumb. Haha.

(Still searching for the stashes)

Wait! Thought you got an OG Omni from Mucsusn.....

That's the whole foot. The first ones are metatarsal bones, they come before the toes... or phalanges...I just learnt that


I did.... I have both now. I prefer OG... but... On the way home from surgery, wife drove, and I was still a bit out of it from the anesthesia.... accidentally combusted in the OG omni... too lazy to clean it right now... and standing is not fun... so I'm using the millennial omni

 

[-dab8-]

That's the whole foot. The first ones are metatarsal bones, they come before the toes... or phalanges...I just learnt that


I did.... I have both now. I prefer OG... but... On the way home from surgery, wife drove, and I was still a bit out of it from the anesthesia.... accidentally combusted in the OG omni... too lazy to clean it right now... and standing is not fun... so I'm using the millennial omni

Oof, stop. I feel like I’m back in anatomy and physiology class.

Lol, glad your surgery went well.

 

[Ricardo]

Check the cuffs of your pants, if you have any...

Or any gaping pockets...

Dude! Pretty close . It tumbled out of the crease in a towel hanging adjacently - I would have swown I heard it tinkle on the floor ..... could it have ricocheted?
Also, I love that you say cuffs (turn-ups) and pants (trousers) - tomato, tomahto (hmm, doesn't really work written down ) . Anyway, it turned up - they always do

 

[Mikey]

Update from earlier. I just used about 1/4 of my m17 chamber, I assume about .025g. Got an impressive amount of hits and plenty medicated. But got it a little too toasty for my liking on my last round. Will test again

 

[mrb]

How is it possible to lose a Cap in a space no bigger than 6m² where I sit and vape every single evening?

Go to your bank and look on the carpet there. That's where someone else found their lost cap

 

[ataxian]

Go to your bank and look on the carpet there. That's where someone else found their lost cap

All my black shirts from the 90’s in da trash.
Tattoos she won’t let me?

VAPCAP “M” I hide from da family!

In private “M” is my tool.

Shh don’t tell anyone?

@arb carpet in EUROPE?
Really?

 

[Moses Baca]

Yesterday I ordered an F2 for my wife because she wasn't connecting with her VC. Tonight she's torching like a pro and blowing huge clouds. I still think she'll enjoy the electronic unit but I'm glad she appreciates the VC now.

Our first VC accident - she was cooking dinner, I was heating the VC. Handing it to her, she somehow wrapped her thumb up onto the cap, getting a nice little burn. She ended up with a ladybug size blister. Lesson learned for both of us.

Side note, we've been using my old Jetlite single flame lighters. They work ok but they need to be refilled frequently and they're a bit difficult to hold the button down sometimes because they're so small. On the plus side, Ronson makes them so they accept the cheap butane. We'll switch back to the triple flame Vertigo torches we got from DV when the quality butane I ordered arrives, hopefully soon.

 

[Grey hair]

Anyone like to take a guess at the species of the pale coloured piece.

I'll go with spruce.
Sexy Sitka Spruce, I might add.

 

[IntoTheVoid]

I got some water finally. OK, holy hell. 2 rips from my Shadow M and I toasted an entire bowl and it wrecked me. Much different than using the M native.

I’m so high right now I can barely move to even type this. The strain for the night is called Ghost Breath.

 

[CVC4455]

Just got my nanovong xls and I love it except the cap falls off if you turn it upside down and if I use it the cap will pop off. Thought I remembered someone here saying to squeeze the cap around the tip to tighten it up? I tried that and it bent a little but nothing happened. So I got a rag and a pair of pliers and tried to tighten it up and it's still loose. Is there anything I can do? Right now I've just been taking the cap from my M and switching that cap back and forth between the M and nanovong.

Also I know I've seen lots of nice glass pieces on here, does anyone have any suggestions for any cheap glass pieces that work well with nanovongs?

 

[Ramahs]

I have a friend who bought an Omnivong a couple months ago (maybe a few months ago, not sure), and he reports that his cap stopped clicking. I told him that he should message Dynavap about it and he did.

He tells me that they suggested ways to try cleaning it, and he did...but he tells me that they have not been responding to his emails since he reported back after trying their cleaning recommendations with no success.

Anyone know which account I could message here on FC to possibly get my friend some more help?

 

[WoodVillain]

Just got my nanovong xls and I love it except the cap falls off if you turn it upside down and if I use it the cap will pop off. Thought I remembered someone here saying to squeeze the cap around the tip to tighten it up? I tried that and it been a little but nothing happened. So I got a rag and a pair of pliers and tried to tighten it up and it's still loose. Is there anything I can do? Right now I've just been taking the cap from my M and switching that cap back and forth between the M and nanovong.

Also I know I've seen lots of nice glass pieces on here, does anyone have any suggestions for any cheap glass pieces that work well with nanovongs?

Squeeze the open end, not the closed end.. should never need pliers. You only need to squeeze a bit to close the open end enough to stay on the tip. Finger pressure should do it.

I have a friend who bought an Omnivong a couple months ago (maybe a few months ago, not sure), and he reports that his cap stopped clicking. I told him that he should message Dynavap about it and he did.

He tells me that they suggested ways to try cleaning it, and he did...but he tells me that they have not been responding to his emails since he reported back after trying their cleaning recommendations with no success.

Anyone know which account I could message here on FC to possibly get my friend some more help?

I believe they are just too busy to keep up right now.... I also sent an email back around black Friday and never got any reply.

Has it been soaked long in iso or other cleaners?

Have you personally tried the cap?

Has he accidentally mixed it up with a generic ebay cap?

Just brainstorming here...

 

[Agent_Age]

Also I know I've seen lots of nice glass pieces on here, does anyone have any suggestions for any cheap glass pieces that work well with nanovongs?

I like my sneaky petes globe with my nano vong but not exactly the cheapest but not to badly priced

 

[Ricardo]

Go to your bank and look on the carpet there. That's where someone else found their lost cap

Yes, and another someone else retraced their steps to a spot under a streetlight, IIRC.

@arb carpet in EUROPE?
Really?

Very astute observation .... in more Northern climes maybe, where I am there is practically no carpet (or wallpaper or central heating or double glazing etc etc.).

 

[Campos]

Carpets in Europe?? yes!!
I can tell you have not been to the UK. Carpets everywhere but bathroom and kitchen.

 

[almost there]

All my black shirts from the 90’s in da trash.
Tattoos she won’t let me?

VAPCAP “M” I hide from da family!

In private “M” is my tool.

Shh don’t tell anyone?

@arb carpet in EUROPE?
Really?

She knows, they always do. If she hasn’t said anything she’s allowing you your little secret

 

[Brian Patrick]

I believe they are just too busy to keep up right now.... I also sent an email back around black Friday and never got any reply.

I have been trying to reach out to them as well regarding a few things. Hoping it was just the Black Friday push. I know they have always had great Customer Service, so I will give them another week, before I bother them again.

 

[Ricardo]

Carpets in Europe?? yes!!
I can tell you have not been to the UK. Carpets everywhere but bathroom and kitchen.

^^What's wrong with this statement?^^

https://tse2.mm.bing.net/th?id=OGC.329810cbd0dd10220824b3ca84edd302&pid=Api&rurl=https://media.giphy.com/media/w8vRk5BqYrgqc/giphy.gif&ehk=bEkHm61gXHkfsmMGKqNNFA
EDIT : @Campos - no offence intended.

 

[stark1]

^ Brexit exit strategy?
<<<<<<>>>>>>>>>>>>>>>>>>>>>>>>>>>>


[/QUOTE]

I have a friend who bought an Omnivong a couple months ago (maybe a few months ago, not sure), and he reports that his cap stopped clicking. I told him that he should message Dynavap about it and he did.

He tells me that they suggested ways to try cleaning it, and he did...but he tells me that they have not been responding to his emails since he reported back after trying their cleaning recommendations with no success.

Anyone know which account I could message here on FC to possibly get my friend some more help?

Tell him to stop using that gooey hash, and to soak it in ISO, or concentrated liquid detergent
Overnight. For a thumbs up, borrow the ultrasonic jewelry cleaner from his SO/friend.

& remember to smile. This December.

 

[Campos]

I have been trying to reach out to them as well regarding a few things. Hoping it was just the Black Friday push. I know they have always had great Customer Service, so I will give them another week, before I bother them again.

They sure must have a great customer service, and I tell you that, I made an order on BF sales, got it wrong with payment, did not order anything in the end, and I got an email yesterday saying that dynavap had sent me a package.
So, something is on its way to mines, even though I didn't order anything. I will update whatever it is coming. But if that is not GREAT customer service, don't know what would be then.

 

[stark1]

@Campos keep us posted, it would be fun to see what Santa sent you for Xmas!

 

[Dynavaper]

I will never forget that hotel in Edinbourgh with carpet on the floor, the walls and the ceiling. Anyway, I love Scotland. Great people there.

 

[Squiby]

the cap falls off if you turn it upside down and if I use it the cap will pop off. Thought I remembered someone here saying to squeeze the cap around the tip to tighten it up? I tried that and it bent a little but nothing happened

When adjusting the cap fit, you must first remove the cap from the tip. Place your fingers near the open end of the cap with one finger on the digger outter end and your thumb on the opposite side squeeze the cap gently but firmly. Test for fit and repeat as necessary.

 

[stark1]

I will never forget that hotel in Edinbourgh with carpet on the floor, the walls and the ceiling. Anyway, I love Scotland. Great people there.

d-Rump is 1/2 Scottish