Dynavap VapCap

stark1

stark1

Lonesome Planet
Kalessin said:
Damn you. I didn't have money when I got the coupon so I deleted it. Saw this and went through my deleted emails until I found the coupon and ordered one...I barely even used my old M before I gave it away...I don't need this thing...I may have a problem.
Click to expand...



Well, if you find you don’t like it, you can always sell it.

I collect stuff, so if you decide to sell it, you always have a buyer. :bang:
 
beyond6strings

beyond6strings

Just another traveller in the Cannaverse
@Summer Rr: Nayshstyle without a condenser.

I'm starting to dial it in and the results are pretty remarkable.

I'm basically doing what is now an 'intuitive' mouth pull with a breath of air followed by 5-8 second lung pulls with the carb covered. I can usually do two per heating cycle.

The mouth pull is to generate a bit more heat, and negative pressure I believe, then a pause for a breath (so I don't die) and then a longer harder lung pull. It's a bit more like using my Milaana as to how I'm responding with draw strength and type. And I don't use the carb open ever. The carb introduces to much air into the proceedings. It's easy to see why most custom stem makers are staying away from those.

I do hope that someday DV decides to investigate carb-less stems in both metal and wood.
 
mrb

mrb

Accessory Maker
Accessory Maker
Summer said:
NDA?
oops.gif
Click to expand...

Yeah. I'm a bit surprised by all the photos and reviews being posted of this new device by people who I assume signed the NDA??
 
Summer

Summer

Long Island, NY
I could be wrong, but I don't think the 18M was part of the VCDC testing program. I think though that the VCDC members were just offered a special promotion not available to the masses. Just makes some of us green with envy. :( :drool: ;)

I would think that after a product is released to the masses, there's no reason that the VCDC members wouldn't be able to discuss the beta testing process & their impressions after the fact.
 
mrb

mrb

Accessory Maker
Accessory Maker
Summer said:
I could be wrong, but I don't think the 18M was part of the VCDC testing program. I think though that the VCDC members were just offered a special promotion not available to the masses. Just makes some of us green with envy.

I would think that after a product is released to the masses, there's no reason that the VCDC members wouldn't be able to discuss the beta testing process & their impressions after the fact.
Click to expand...
You're probably right. And i guess photos of the device already exist...
 
Hippie

Hippie

Well-Known Member
I've still not even had a confirmation email or anything since signing the VCDC NDA

I'm calling it the NADA atm as all contact seems to have stopped since I signed it ..... other than another invitation to join accompanied by the promise of a coupon this time .... so I did that again and I still got nada :shrug:
 
cybrguy

cybrguy

Putin is a War Criminal
stark1 said:
So color me confused.

Was the flash sale for VonGs, or am I RonG? Geo said XL kits.
Click to expand...
@stark1 You seemed to have missed this reply to you from shortly after the DV live vid...

vapshift said:
You heard right. George misspoke. The Flash Sale is 20% off VonG stem & body midsections.
Code is: 0322RPPDL

Sorry for the confusion. :ko:

It's live; anything can and will happen.:worms:



FYI I cut the preroll on every show. The Flash sale info is now at 1:40
Click to expand...
http://fuckcombustion.com/threads/dynavap-vapcap.18853/page-1138#post-1233344
 
Mulchmaker

Mulchmaker

Veni Vidi Vapi
mrb said:
Yeah. I'm a bit surprised by all the photos and reviews being posted of this new device by people who I assume signed the NDA??
Click to expand...

I checked with DV about exactly this. They replied that because the M18 has already been publicly announced, posting photos, reviews, etc. here or on other platforms does not violate the NDA. They would appreciate tester feedback being sent directly to them, though.
 
stardustsailor

stardustsailor

Well-Known Member
Accessory Maker
beyond6strings said:
@Summer Rr: Nayshstyle without a condenser.

I'm starting to dial it in and the results are pretty remarkable.

I'm basically doing what is now an 'intuitive' mouth pull with a breath of air followed by 5-8 second lung pulls with the carb covered. I can usually do two per heating cycle.

The mouth pull is to generate a bit more heat, and negative pressure I believe, then a pause for a breath (so I don't die) and then a longer harder lung pull. It's a bit more like using my Milaana as to how I'm responding with draw strength and type. And I don't use the carb open ever. The carb introduces to much air into the proceedings. It's easy to see why most custom stem makers are staying away from those.

I do hope that someday DV decides to investigate carb-less stems in both metal and wood.
Click to expand...

The way I see it ...

VapCaps do have two basic "modes" of operation:

a ) The well-known fully or semi /partially open carb mode ,where the Venturi effect (aided by the low-speed /expanded-volume/hot vapor vs the high-speed /cool air ) dominates operation-wise and the inhaled vapor is diluted with air.
Kinda resembles the experience of most electronic vapes,
mainly regarding the inhaling techniques involved (lung /diaphragmatic pulling ),
vapor " smoothness " & low draw resistance.

and

b ) The closed carb hole (or carbless) where the facial muscles and the powerful negative pressure they can create ,do all the job,whereas the inhaled vapor is as "raw & concentrated " as it gets to be.
Draw resistance is very quite also.
Pipe-like,joint-like ,blunt-like,whatever you choose to compare it with ,the toking experience is very close.

The final result is the same ,at both cases.

Cheers.
:2c:
 
ArthurJ

ArthurJ

Well-Known Member
Yeah, I don't see myself selling it.
That would seem wrong. It was a hoot watching the broadcast last night.
I like that it was a contest that inspired creativity and it was fun to hear some of the other entries. I wonder how may submissions they got?
I hope they do more contests.

In other news, I picked up a cobalt mflb orbiter. I like the orbiter with vongs.

LPRDAiU.jpg


4TceTmA.jpg
 
Chose

Chose

Well-Known Member
:razz::rofl:Waw I've been away for a while and can't believe how big this page has become it's fater than the rip I'm about to vape on my beloved omni
Thanks George for engineering this amazing little gem
One year on and it's still my favourite vape ever
And I own about twenty others
:rant::wave::evil::hmm:
It maybe two years can't remember but it's been all good real good love you all chose
It's sure cured my vas
But if they ever eventually legalised weed in the uk I might get me one of those ghosts
To compliment my vap cap
Peace
O god help me that Armageddon ls strong
 
Last edited:
needalift

needalift

Well-Known Member
ArthurJ said:
Yeah, I don't see myself selling it.
That would seem wrong. It was a hoot watching the broadcast last night.
I like that it was a contest that inspired creativity and it was fun to hear some of the other entries. I wonder how may submissions they got?
I hope they do more contests.

In other news, I picked up a cobalt mflb orbiter. I like the orbiter with vongs.

LPRDAiU.jpg


4TceTmA.jpg
Click to expand...
That a good look !!

KidFated. said:
That’ll be about tree-fiddy.
Click to expand...
Goddamn Loch Ness monster !!!!
 
Chose

Chose

Well-Known Member
needalift said:
That a good look !!


Goddamn Loch Ness monster !!!!
Click to expand...
God sake that is something else out of this world we're so behind here in the uk
Well where I live we ar
Well I am being a recluse
Living in the second biggest city in ik but can't go out there must be so much weed out there but I'm scared it's like zombi feast around here wished I lived on a secret planet where all plant life contains THC
 
You must log in or register to reply here.
Top Bottom