darbarikanada
Well-Known Member
I think that's the biggest (vape) hit I've ever seen in an online video!
Divine Tribe atty's
- Thread starter divinetribe
- Start date
Improvaper
Well-Known Member
As much as we want TCR to be a magic perfect number, there are many variables involved. A major one is which mod you use. TCR 200 has been flawless for me on my Wismec Gen3 Dual, but it varies on other mods. You need a good thermometer to verify your settings, and they're not terribly expensive.
gra.4083
Well-Known Member
V5 Settings. Ive been playing around between TCR 170 and 185. temp ranging from 450-500f having good results currently on two different picos with tcr 182 34w 470f and tcr 178 34w 485f on my eleaf aster mod. im loving the big hits from my v5 but prefer the flavor of my Psic V4s which are still in heavy rotation
arrr
Well-Known Member
@divinetribe can't wait for v5, sent email to be added to waiting list but was told will get a notification email when orders can be placed on the website. Was wondering if there was something else I should do.
Also wondering when The Core maybe back in stock and what (economical) box mods are people using with the v5?
Thanks
Also wondering when The Core maybe back in stock and what (economical) box mods are people using with the v5?
Thanks
darbarikanada
Well-Known Member
divine tribe's reddit page has regular updates
BabyFacedFinster
Anything worth doing, is worth overdoing.
Matt is working on releasing a upgraded Core with a compatable V5. They are hoping for a late November release. There are posts about it on their reddit page.
lazylathe
Almost there...
Best place to check for updates:
Divine Crossing v5 Rebuildable Concentrate Ceramic Heater - Divine Tribe
Rebuildable concentrate heater with v5 side and bottom heated ceramic cup. Each part can be replaced, the whole unit can be rebuilt.
ineedhemp.com
new pico with auto fire built in
are now available i am selling 100 of these to test ,,
NO need for a computer and arctic fox
V5 proto upgraded parts are getting mailed out this week and next
are now available i am selling 100 of these to test ,,
NO need for a computer and arctic fox
V5 proto upgraded parts are getting mailed out this week and next
darbarikanada
Well-Known Member
are these compatible with the V4.5 SiC atomizers?
lazylathe
Almost there...
They will work with any atomizer.
Abysmal Vapor
Supersniffer 2000 - robot fart detection device
It was available way back with another company. It was pain in the ass to clean,although it performed great. Maybe if it was cast in Sic or Quartz it would be easier.
DJ Colonel Corn
The Vapor Ninja
Hi, all !
I just got the new release of the v5, new spacer, new heaters. Didn't get a new base due to a shortage. The oid one works.
I'll have images for you real soon.
Seems like folks don't know what the V5's heaters are made from, so I'll explain a little here.
The cup is made from Al2O3 (Aluminum Oxide, Alumina) ceramic. The spacer is Zirconia. The embedded coil is tungsten, with high temp tungsten slurry solder on nickel leads. The cup is sealed with a high temp 1300°c glaze.
The tungsten wire is embedded inside the alumina cup, heating it from the inside out, including the side walls.
For those of you who were part of the beta tester group (those who got their v5 already), you will get a new spacer with 4 wide teeth instead of the prototype's spacer with 8 teeth. This was due to some beta test reports, including mine, of 1 or more teeth snapping off from heat expansion. You will also receive 2 new heaters, which are about 0.25mm wider, allowing Divine Tribe's inserts to fit.
So far, people have chimed in on the use of TCR values on the new heaters. Some say the recommended 215 from Matt is great, others prefer the old 180 value, saying the 215 seems 'too hot'. As stated by @OF a few posts back, the TCR value shouldn't really increase with these new cups, at least on paper.
I will let you know when I get this wired up and vaping, but right now I'm assuming I will be using the same settings as I had on the prototype cup. My settings on the prototype cup are 35W (Matt now suggests not going over 35 watts), 440° F, TCR 180 (on a DNA mod).
Those of you curious about what is in the glaze that is applied to the alumina cup can see some info here about what is in the glaze: https://www.thesprucecrafts.com/what-goes-into-glazes-2746232
For those wondering about the alumina cup, here's some info: https://digitalfire.com/oxide/al2o3
If you want to know how to set TCR values on a DNA mod, see here: https://thevapor.ninja/tcr/
For all of you waiting to get the V5 for the 1st time..... stay tuned ! They should be (here's hoping...) available by mid-December !
I just got the new release of the v5, new spacer, new heaters. Didn't get a new base due to a shortage. The oid one works.
I'll have images for you real soon.
Seems like folks don't know what the V5's heaters are made from, so I'll explain a little here.
The cup is made from Al2O3 (Aluminum Oxide, Alumina) ceramic. The spacer is Zirconia. The embedded coil is tungsten, with high temp tungsten slurry solder on nickel leads. The cup is sealed with a high temp 1300°c glaze.
The tungsten wire is embedded inside the alumina cup, heating it from the inside out, including the side walls.
For those of you who were part of the beta tester group (those who got their v5 already), you will get a new spacer with 4 wide teeth instead of the prototype's spacer with 8 teeth. This was due to some beta test reports, including mine, of 1 or more teeth snapping off from heat expansion. You will also receive 2 new heaters, which are about 0.25mm wider, allowing Divine Tribe's inserts to fit.
So far, people have chimed in on the use of TCR values on the new heaters. Some say the recommended 215 from Matt is great, others prefer the old 180 value, saying the 215 seems 'too hot'. As stated by @OF a few posts back, the TCR value shouldn't really increase with these new cups, at least on paper.
I will let you know when I get this wired up and vaping, but right now I'm assuming I will be using the same settings as I had on the prototype cup. My settings on the prototype cup are 35W (Matt now suggests not going over 35 watts), 440° F, TCR 180 (on a DNA mod).
Those of you curious about what is in the glaze that is applied to the alumina cup can see some info here about what is in the glaze: https://www.thesprucecrafts.com/what-goes-into-glazes-2746232
For those wondering about the alumina cup, here's some info: https://digitalfire.com/oxide/al2o3
If you want to know how to set TCR values on a DNA mod, see here: https://thevapor.ninja/tcr/
For all of you waiting to get the V5 for the 1st time..... stay tuned ! They should be (here's hoping...) available by mid-December !
DJ Colonel Corn
The Vapor Ninja
Regarding TCR and what temperature the cup is actually at, I have this, from uitpersen:
Measured with a Fluke 52-2 temp meter and two different k type thermocouples.
Standard wire style thermocouple and a fluke surface probe.
My Terpometer measures round 30° hotter.
-TCR 180, 38w, 410°f, .46 ohm heater:
This setting with a .46 ohm heater is close to the set temp around 25-30 second.
At around 20 seconds the temp is 380°f by 30 seconds it's 410°f.
Hold past 30 seconds for another 15 sec and the temp fluctuates around 445°f by about 8 degrees.
90 second hold and the temps reached 461°f.
-TFR Ni, 38w, 210°f, .46 ohm heater.
Actual temp is reached much faster.
About 15 seconds to reach 410°f and at 20 sec I'm at 433°f, 30 sec at 445°f.
Hold past 30 seconds for another 15 sec and the temp fluctuates around 448°f, holding for 90 secs temp reached 471°f
.
-uitpersen
I'd just like to add that the V5 starts vaping at around 15-20 seconds from firing, so the higher temps aren't reaching the cup during use.
Measured with a Fluke 52-2 temp meter and two different k type thermocouples.
Standard wire style thermocouple and a fluke surface probe.
My Terpometer measures round 30° hotter.
-TCR 180, 38w, 410°f, .46 ohm heater:
This setting with a .46 ohm heater is close to the set temp around 25-30 second.
At around 20 seconds the temp is 380°f by 30 seconds it's 410°f.
Hold past 30 seconds for another 15 sec and the temp fluctuates around 445°f by about 8 degrees.
90 second hold and the temps reached 461°f.
-TFR Ni, 38w, 210°f, .46 ohm heater.
Actual temp is reached much faster.
About 15 seconds to reach 410°f and at 20 sec I'm at 433°f, 30 sec at 445°f.
Hold past 30 seconds for another 15 sec and the temp fluctuates around 448°f, holding for 90 secs temp reached 471°f
.
-uitpersen
I'd just like to add that the V5 starts vaping at around 15-20 seconds from firing, so the higher temps aren't reaching the cup during use.
DJ Colonel Corn
The Vapor Ninja
... Beem testing out the new, for upcoming release very soon, DT V5.
First take is that the glaze job is MUCH better. I can't speak for the inserts fitting, because I don't have any. I don't really intend to use any, either. The glazed alumina cup works wonderfully.
I'll be doing a full review etc. soon, afer some testing. As far as TCR goes for the new heaters.... the ol' TCR 180 from the prototype seems to work just fine. I tried 200, it's decent, a bit of a softer hit, maybe I like it, not sure.
Here's some images (EDIT: New V5 users will have a knurled based, basically the same base but with knurling):
First take is that the glaze job is MUCH better. I can't speak for the inserts fitting, because I don't have any. I don't really intend to use any, either. The glazed alumina cup works wonderfully.
I'll be doing a full review etc. soon, afer some testing. As far as TCR goes for the new heaters.... the ol' TCR 180 from the prototype seems to work just fine. I tried 200, it's decent, a bit of a softer hit, maybe I like it, not sure.
Here's some images (EDIT: New V5 users will have a knurled based, basically the same base but with knurling):
BabyFacedFinster
Anything worth doing, is worth overdoing.
Very exciting. I'm trying to figure out if there is only one type of V5. Is the V5 that is supposed to be compatable with the Core erigs the same as the V5 that you are using? From what I am guessing, the V5 for the Core might come with a different housing for that erig setup?
anasrzi
Well-Known Member
How does flavour compare between SiC and Alumina ceramic? I have and use regularly my AVS m22 (well aware of the issues many have had, so we will pass that by. Mines been great start to finish). My biggest issue is the bucket size, I tend to get oil spit into the mouthpiece even with small, rice size loads.
But I love the flavour and produces enough vapour for me. The V5 looks like a larger bowl, with the added benefit of side wall heating, just wonder if there's a compromise on flavour?
But I love the flavour and produces enough vapour for me. The V5 looks like a larger bowl, with the added benefit of side wall heating, just wonder if there's a compromise on flavour?
secret link for FC peeps who have bought a core in the past and want to try the v5 coil in it
please do not share this link only have 30 of these proto coils in stock
THANKYOU10 for 10% off
Rebuildable v5 Coil for the Sequoia , Original Core , and Core 2.0 Erig - Divine Tribe
Replacement Core Coil now with the v5 ceramic side and bottom heated cup THIS IS A SPECIFIC CUP THAT WILL FIT THE SEQUOIA only available on HVTs site 1 Rebuildable Heater coil with v5side and bottom heated cup installed ready to go 1 Side and bottom heated v5 replacement cup in my opinion...
ineedhemp.com
THANKYOU10 for 10% off
All EMAILs have been sent with v5 link IF you did not get it check spam folder, here is the link below as well.. I am confident I will have stock through the New year. Spare parts are limited but we plan on stocking them as soon as we can.
ineedhemp.com/produc...
RustyOldNail
SEARCH for the treasure...
All EMAILs have been sent with v5 link IF you did not get it check spam folder, here is the link below as well.. I am confident I will have stock through the New year. Spare parts are limited but we plan on stocking them as soon as we can.
ineedhemp.com/produc...
Congratulations, looks great. Personally, I did not signup, so I’ll certainly be interested when sales are open to general public.
DJ Colonel Corn
The Vapor Ninja
Here, this might help:
Click the image above for the article it'll link you to. It has a review of it, and explanations.
Well, I prefer the tastes I get from the Alumina, personally, also an easier cleanup due to the glaze. Helps too that it's white. The fact that it's wider DOES help in many ways, to vaporize concentrates more effectively.
We're all happy and excited about the V5 being (sort of) available !
Thanks Matt !
<3
androponic
vaped.
thanks @divinetribe placed my order today for the V5 and the Core prototype coil and a bunch of parts. Thanks for the heads up and great products as usual, the tribe never ceases to deliver!
BabyFacedFinster
Anything worth doing, is worth overdoing.
Thanks for that. I did finally figure it out and have one of each coming. I"m excited about both, but my Core unit is my current DD so I will probably be trying out the compatable coil first.
tb42091
Well-Known Member
I decided to jump on the herb cafe's stock last weekend instead of waiting, just got my black v5 in! Also got some extra cups. I'm not expecting any different functionally from the proto, but will update after I've used it a bit. I appreciate all the time and work put into these!