Dabpress Rosin Plates

[psychonaut]

@DogBoy perhaps you can PM me what weirdness you experienced during your order and we can see if we can normalize it somehow? Thanks for your business!! You will be pressing very soon I am certain.

EDIT: Ahh I see it was the warehouse options for the different products. I see what you're saying. In the bundle area, you can choose the warehouse location of each individual item, yes we do try and get the product to our customers as quickly as possible!

 

[DogBoy]

...yea, that was it...when I tried to buy the bundle the only place that had it "in stock" was CN...

...I did not understand that you would want to do separate shipments...

...I already have questions such as what should I be thinking of next in terms of expensive shit to buy...(grin)

 

[psychonaut]

...yea, that was it...when I tried to buy the bundle the only place that had it "in stock" was CN...

...I did not understand that you would want to do separate shipments...

...I already have questions such as what should I be thinking of next in terms of expensive shit to buy...(grin)

Gotcha, this should all be resolved once the pumps reach their warehouses, we just released it actually!

I don't like expensive, so how about cheap? Do you have a glass piece and a quartz banger w/torch? How about an enail? The dnail SiC halo is a very durable nail that will outlast quartz but have a different flavor profile. Maybe a honey straw and torch? Our customers love those!

I dont know what else you would need but that would just about cover all my bases. Portability device, check out the divinetribe quartz quest, longmada motar, or humboldt tech SAI atomizer.

 

[DogBoy]

...I meant in the lines of rosin production...I am Vaping on Flowerpot V Rod right now...

...I know I need some of this "parchment paper" I hear of...

...besides the machinery you sent me some bags and a puck press...I am sure I'll need more than that, eh...

...I figger I will end up spending aboot what the dp-hr10t35v-110 cost in the first place...

...I would still appreciate an explanation in simple terms aboot what the difference in capabilities is between the 35 and 35v models...

...is it as simple as the machine operates in a horizonal orientation so the rosin drips out...???....

 

[psychonaut]

...I meant in the lines of rosin production...I am Vaping on Flowerpot V Rod right now...

...I know I need some of this "parchment paper" I hear of...

...you sent me some bags and a puck press...

1. 10-ton driptech heat press machine - check
2. Hand pump - check
3. Pre-press mold and filters - useful but not needed - check
4. Parchment paper (Reynolds or Kirkland brand works fine, just don't get WAX paper!)
5. Flowers

 

[BabyFacedFinster]

I've been looking around for some cool magnets to clip on the side of the top heating plate, to keep the parchment out of the way when the rosin starts to flow.

I bet little Dabpress magnets would be a hit. Especially with the logo on them.

 

[DogBoy]

...so you don't need all that stuff they sell in big Nug Smasher packages @ Rightbud…???...

 

[LesPlenty]

I've been looking around for some cool magnets to clip on the side of the top heating plate

@phattpiggie makes these for Vapcaps;

or;
https://www.ebay.com.au/itm/Magneti...db8f:m:mv0z8GXqCWkB948N0XBcxxA&frcectupt=true
https://www.ebay.com.au/itm/4Pcs-12...678790&hash=item3afb207789:g:DnAAAOSwdiFdJQrg

https://www.ebay.com.au/itm/3043-20...m3d8b74eefc:g:4zIAAOSwMNZc5Tlo&frcectupt=true

so you don't need all that stuff

Don't know what they have in their pack but you have all you need (and more) for making some top quality Rosin, bar the parchment paper and buds.

 

[psychonaut]

Good morning FC!

Our upcoming enail should be available soon. It is a Titanium universal nail base to fit in any glass joint size of your choosing. The Titanium Universal base accommodates a 25mm quartz dish and a Titanium carb cap. The enail kit will come with a replacement dish in the event that one breaks, and we will offer replacement dishes for the future. The wiring for the heater cables is the standard wiring that is used by many manufacturers including dnail and Auber, for the best compatibility with parts.

$119 - https://dabpress.com/collections/th...-heater-hybrid-quartz-titianium-nail-included

Easily move your 20mm barrel coil to your 20mm quartz banger to have a full quartz air path if you want.

 

[DogBoy]

...a Hot Rod instead of a V Rod...???...

...I hope the tariffs don't affect pricing n' profits too much...

 

[psychonaut]

We will do our best to keep costs down for fellow rosineers, thank you.

 

[DogBoy]

1. Pre-press mold and filters - useful but not needed - check

...that is what is comming today...the stuff you sold me I didn't need...

...wtf...it's like you paid me $4 to take it...LoL...

We will do our best to keep costs down for fellow rosineers, thank you.

...I appreciate this in your designs...they appear industrial instead of jerry rigged or bloated...​

 

[psychonaut]

...that is what is comming today...the stuff you sold me I didn't need...

...wtf...it's like you paid me $4 to take it...LoL...

Who knows maybe you'll change your mind on if it's needed! We have rosineers go back and fourth between filters, no filters, pre-pressed puck vs hand stuffed puck. It's true it was an affordable add-on =)

 

[DogBoy]

...I would suspect things like the materials used and results desired might play a factor in that...

 

[invertedisdead]

Everyone has their own SOP, but I always bag and tag before pressing! I appreciate the more consistent PSI and final puck size of a bag. And the clean rosin!

 

[LesPlenty]

I like my pre-press mold and folded over ends (stitched is good too), I tried a puck with a bag without a top and bottom and it blew out and made a bit of a mess. I chopped up the blown bag. stuffed it in another bag and pressed it again so not much was lost, fun all the same.

 

[elmomuzz]

I’m a non bagger. I usually place loose buds in the press. Small batch.

 

[DogBoy]

...I am mildly disgruntled behind issues beyond the shipper's control...

...UPS has been sitting on the actual press for three days now and it still has not shipped...

...the pump from freekin' CHINA is arriving tomorrow...!!!...LoL...

 

[psychonaut]

...I am mildly disgruntled behind issues beyond the shipper's control...

...UPS has been sitting on the actual press for three days now and it still has not shipped...

...the pump from freekin' CHINA is arriving tomorrow...!!!...LoL...

PM me your order # if you would so I can have the factory reps get with UPS to see what the delay is. Usually everything arrives within a day or two of each other 2-7 day delivery time worldwide.

 

[BabyFacedFinster]

I’m a non bagger. I usually place loose buds in the press. Small batch.

I am back and forth. I like the idea of having freshly made rosin, as a small amount goes a long way. It takes me about 2-3 weeks to go through a gram of rosin. However my situation does not allow me to leave the press out for instant use, and I also believe I get better yields with a bag and a 3-4g puck.

I also think fresh rosin is more of an issue for me in the summertime. During the winter I rarely have any area of my home above 65F. This is a good temp for my cannabis storage. In the summer I have to keep my stuff in the cellar or the fridge to avoid temps in the upper 70's, and it becomes a bit of a pain. I do notice that flavor and potency starts to suffer so I will make smaller batches.

 

[LesPlenty]

I am liking the 10gram pucks, easy size to work with and gives me about 2 grams of rosin so keeps me going for about a week (only just starting on concentrates so these figures might change).

 

[ColoVaper]

...that is what is comming today...the stuff you sold me I didn't need...

...wtf...it's like you paid me $4 to take it...LoL...

...I appreciate this in your designs...they appear industrial instead of jerry rigged or bloated...​

I tried a crap load of different brands of filters and my favorite are the Dabpress ones. Glad they sent some to try or I might not ever found them. I also tried every micron and I’m settled with 160. I don’t see a reason to go smaller.

 

[DabOnTheTyne]

Sorry if I am being dumb, just did my first press @ 190 and it it boiled and vaped on the plates it was far to hot. Every video seems to be pressing around this temp so not sure what I'm doing wrong unless the eu units are set in degrees c not f. I am aware you need to run them a couple of times to dial in it just seemed way to hot.
Any hel would be great.

Atb

 

[CastIronHits]

Sorry if I am being dumb, just did my first press @ 190 and it it boiled and vaped on the plates it was far to hot. Every video seems to be pressing around this temp so not sure what I'm doing wrong unless the eu units are set in degrees c not f. I am aware you need to run them a couple of times to dial in it just seemed way to hot.
Any hel would be great.

Atb

I press at 190 Fahrenheit which is 88 Celcius. 190 Celcius or 375 Fahrenheit is well within vaporization range.

 

[DabOnTheTyne]

Yes indeed on further investigation it seems my pid box is displayed in degrees Celsius,

Thanks