Customized vape setups

quomist

Rock the Casbah
stonemonkey55 said:
Minnesnowta - it's what SG calls his Peyote Perc, basically its a gridded ball that looks like a peyote plant.

I updated the youtube video so you don't have to sit thru 2 minutes of me trying to open the box:

http://www.youtube.com/watch?v=uiSVIXwxPeY&feature=player_embedded

And yes yes! That is the Samurai Dubb close to completion!!!!!!! So STOKED!
If that one on GD wasn't yours, I can't wait to see what you have in store.
 
quomist,

minnesnowta

Vaporist/Glass Head
I figured the one on gd was for Preston or someone real close to him. I didn't think you went with a rasta scheme either. Payote ball looks sick though. Looks like it diffuses a bit better than the inv4.

I think within a week you got the smallest pillar sg has made and atlbuds got the biggest one he's done. He got a 70mm bore monster with the payote ball too. Sg is droppin bombs.

Can't wait to see the samurai and milk vids with the Xhale.
 
minnesnowta,

aznfknpride

borosilicate fiend..
Preston told me that was SM's.. Either way that's quite the conversational piece, and I'm sure it fckin rips too!
 
aznfknpride,

minnesnowta

Vaporist/Glass Head
Lol WTF. Your right azn. Sm said it was his on GD. And it is rasta vs jamacia. I didn't even notice before. That's gotta be his. That thing has soo much fucking work. Still feel like that showerhead coulda been bigger. Should stack like crazy anyways
 
minnesnowta,

AgentofChaos

Serial Vapist
I am looking for some advice, I am gearing up to order a nice bong and I can't chose between 2. They are identical except 1 has a perc, and the other doesn't. I have never owned or used a perc bong before and I am looking for some advice. Is a perc worth owning, or is it too much of a pain in the ass?

Option 1 without perc:
http://www.aqualabtechnologies.com/...5-mm-beaker-large-silver-and-clear-label.html

Option 2 with perc:
http://www.aqualabtechnologies.com/...s/syn-38-mm-dome-perk-beaker-white-label.html
 
AgentofChaos,

quomist

Rock the Casbah
AgentofChaos said:
I am looking for some advice, I am gearing up to order a nice bong and I can't chose between 2. They are identical except 1 has a perc, and the other doesn't. I have never owned or used a perc bong before and I am looking for some advice. Is a perc worth owning, or is it too much of a pain in the ass?

Option 1 without perc:
http://www.aqualabtechnologies.com/...5-mm-beaker-large-silver-and-clear-label.html

Option 2 with perc:
http://www.aqualabtechnologies.com/...s/syn-38-mm-dome-perk-beaker-white-label.html
I've never had issues with perc maintenance. I just use iso+salt in my tubes to clean them which reaches all the nooks and crannies.

The only difference is that one is thicker glass than the other and presumably more sturdy. Percs usually add more drag on the tube but that dome looks to be OK. Check out youtube to see if they have any milk vids to be sure.

I'd probably change out the downstem and get a showerhead one like this for either tube:

http://www.chicokush.com/products/AlexK-18{47}14-Showerhead-Diffusor.html
 
quomist,

minnesnowta

Vaporist/Glass Head
Holy Fuck that payote ball diffuses like crazy. Amazing vid once again.

Is that an opal encasement on the top???
 
minnesnowta,

Lo

Combustion free since '09
Wow!! I might need to wipe the drool off my desk! Love that slo-mo :D Just WOW!!
 
Lo,

quomist

Rock the Casbah
Thanks for the vid SM! I'm loving the mask. I would think it's Kabuki but it looks like a native american design?
 
quomist,

VapoBreizh

Well-Known Member
stonemonkey55 said:
I finally got around to making a video with my beloved Sovereignty Pillar Bubbler.

I don't know if any tube can surpass this one in terms of diffusion and satisfaction of the hit.

Without further ado

http://www.youtube.com/watch?v=mHl2DisNPx0
Yeah! So pure!

here is my courrent setup! just receive a little ice bong for my VaporStar and a big torch lighter!
So there are a VaporStar, Alu-VG and classic, a EHLE ice 100ml and a little bong that i took with my VS!
And an Unilite Turbo Flame Utility Ligher...hot as hell!!!
 
VapoBreizh,

stonemonkey55

Chief Vapor Officer
Manufacturer
@minnesnowta - it is actually just a clear marble on top, i'm assuming it started off as a tube and then he sealed it with the marble, not 100% sure though.

@quomist - It is a Chinese opera mask, it is supposed to look like the face paint on my avatar but I guess it is hard to tell.

Thanks for watching
 
stonemonkey55,

AgentofChaos

Serial Vapist
quomist said:
AgentofChaos said:
I am looking for some advice, I am gearing up to order a nice bong and I can't chose between 2. They are identical except 1 has a perc, and the other doesn't. I have never owned or used a perc bong before and I am looking for some advice. Is a perc worth owning, or is it too much of a pain in the ass?

Option 1 without perc:
http://www.aqualabtechnologies.com/...5-mm-beaker-large-silver-and-clear-label.html

Option 2 with perc:
http://www.aqualabtechnologies.com/...s/syn-38-mm-dome-perk-beaker-white-label.html
I've never had issues with perc maintenance. I just use iso+salt in my tubes to clean them which reaches all the nooks and crannies.

The only difference is that one is thicker glass than the other and presumably more sturdy. Percs usually add more drag on the tube but that dome looks to be OK. Check out youtube to see if they have any milk vids to be sure.

I'd probably change out the downstem and get a showerhead one like this for either tube:

http://www.chicokush.com/products/AlexK-18{47}14-Showerhead-Diffusor.html
Thanks for the info quomist, i opted for the non perc after doing some more reading. Considering I havent combusted in over 4 months I figure there isnt a real need for a perc. However you read my mind on the shower-head diff, they sell them on Aqua labs site, once I receive the bong I can measure the downstem and place an order for one.
 
AgentofChaos,

minnesnowta

Vaporist/Glass Head
I love gettin new glass. :D
7865135c.jpg

de1f0bc0.jpg

55ad46f3.jpg

7b96929e.jpg


I'm thinking about getting a showerhead for this lil guy and use it vapin too. This thing and a supreme would fit perfectly too
 
minnesnowta,

fail

Well-Known Member
If you look closer at the first pic you will see a short piece of cigarette filter in the tube. Also there is a hole (at the right of the tube hole) to quickly empty the air by lifting the finger.
img0407c.jpg

img0406n.jpg

img0405o.jpg
 
fail,

lwien

Well-Known Member
Minn, that glass almost looks like wood. Very cool............

Fail, what the.....?
 
lwien,

quomist

Rock the Casbah
I recognize that lil b work from a mile away! Nice pickup. I'm jealous because I have a matching bowl and chillum but not the bubbler.

Looks like there's one day left before my Supreme Vape comes. I can't wait to unleash it on this:

(Look familiar durden and azn?)

IMG_0749.jpg
 
quomist,

AgentofChaos

Serial Vapist
just received my new beaker bong and also bought a nice shower head diff, after reading lwien's thread about the hot water i decided to break it in that way and.....:ko:.....im so happy to finally have the ssv/bong setup.
imagedg.jpg

imageuvj.jpg

imagevt.jpg
 
AgentofChaos,

lwien

Well-Known Member
Nice setup AC.

Between the huge hits that you can get off that SSV and that beaker of hot water, you should be more than nicely toasted, eh?
 
lwien,

AgentofChaos

Serial Vapist
lwien said:
Nice setup AC.

Between the huge hits that you can get off that SSV and that beaker of hot water, you should be more than nicely toasted, eh?
haha yessir! that was my first time ever hitting a bong w/ hot water and it was so invigorating, much less irritating than i imagined.
 
AgentofChaos,

Mark

John Brown
PDR_0682.jpg

PDR_0681.jpg

PDR_0687.jpg

PDR_0691.jpg

PDR_0685.jpg
I know you all hate rez but I love watching it build up in there. (that's a hash+oil only pipe) :rolleyes:

Bong has 2 perks with 6 tree's each.
 
Mark,

aznfknpride

borosilicate fiend..
Minnesnowta-rig is lookin good brah :)

AgentofChaos-is that 38mm or 44mm? Going to be picking up a 38mm straight soon, nice grab!

Mark-2 percs, 2 trees, 6 arms each.. Nice pieces you got there!

Here's a pic of my cab... Quomist, your tube's big brother all the way on the left... Close ups later
DSCN7003.jpg
 
aznfknpride,

Choism

Well-Known Member
aznfknpride said:
Minnesnowta-rig is lookin good brah :)

AgentofChaos-is that 38mm or 44mm? Going to be picking up a 38mm straight soon, nice grab!

Mark-2 percs, 2 trees, 6 arms each.. Nice pieces you got there!

Here's a pic of my cab... Quomist, your tube's big brother all the way on the left... Close ups later
http://img.photobucket.com/albums/v248/aznfknpride/pieces/DSCN7003.jpg
Holy shit, we need to chill brah!
keep it going fellas, very nice!
 
Choism,
Top Bottom