Crafty/Crafty+ by Storz & Bickel

cgod

cgod

Well-Known Member
Jill NYC said:
@cgod Are you using at higher temps?
I have an old one, so may not be a good comparison; I only get about 3 5-7 minute sessions at 385F and/or 410F before needing to recharge. And I am probably being a little generous saying 3 because often it will die during the 3rd session.
Click to expand...
I only vape at 338f and 356f,no higher unless i bump it right towards the end

ive only had 7 hours on it, im going to do a few more sessions and actually see how long it lasts me until a dead battery, it didnt do this a month ago when i got it, whats more worrying is i use it less now and use my Lotus at home because i dont want to put milage on my Crafty, ive recognised how quick it dies since using it less :(:|
 
vapviking

vapviking

Old & In the Way
cgod said:
I only vape at 338f and 356f,no higher unless i bump it right towards the end

ive only had 7 hours on it, im going to do a few more sessions and actually see how long it lasts me until a dead battery, it didnt do this a month ago when i got it, whats more worrying is i use it less now and use my Lotus at home because i dont want to put milage on my Crafty, ive recognised how quick it dies since using it less :(:|
Click to expand...
Try running it all the way down, that can re-calibrate the battery status meter.
You folks should be getting more than 3 chambers/sessions from your Crafty's, imo, especially the new +20% model.
 
vapviking,
  • Like
Reactions: Jill NYC
cgod

cgod

Well-Known Member
Sorry for the back to back (dont ban me)

Update on the Crafty and basicly what i have sent s&b

Crafty giving me problems only 9 hours in,battery died so i charged it to full,once it was fully charged i did a session & took a screenshot of the time stamp as soon as it started,the time was 8hrs 27m,after two sessions spread out & twelve minutes later, the battery had already drained THREE bars.
Today i have used it again and around six minutes in the battery has died fully at 8hrs 50m, giving me a total of 23 minutes, take into consideration the heat up time on a full battery, once again that night and once again this afternoon ,the unit is dying after approx 19mins!
 
VapeCrafty

VapeCrafty

New Member
cgod said:
Sorry for the back to back (dont ban me)

Update on the Crafty and basicly what i have sent s&b

Crafty giving me problems only 9 hours in,battery died so i charged it to full,once it was fully charged i did a session & took a screenshot of the time stamp as soon as it started,the time was 8hrs 27m,after two sessions spread out & twelve minutes later, the battery had already drained THREE bars.
Today i have used it again and around six minutes in the battery has died fully at 8hrs 50m, giving me a total of 23 minutes, take into consideration the heat up time on a full battery, once again that night and once again this afternoon ,the unit is dying after approx 19mins!
Click to expand...

Yeah, thats bad dude. :-/ I hope, they will fix it quickly
 
Last edited:
VapeCrafty,
  • Like
Reactions: cgod
ktmstick

ktmstick

Well-Known Member
cgod said:
Only had it since the end of august, quite annoyed man :doh:
Click to expand...
I'm sure s&b will sort you out, they have a pretty good reputation and I have personal experience of the warranty program. I'm sure it's frustrating but failures happen, it's how they deal with it is the important thing.
 
ktmstick,
vapviking

vapviking

Old & In the Way
cgod said:
Only had it since the end of august, quite annoyed man :doh:
Click to expand...
Don't hesitate to send it in. They will certainly take care of you.
Reminder; warranty time is also best time to ask for upgrade to Mighty, and it is indeed an upgrade. After 4 Crafty returns I switched, and now the 1 Mighty is over two years old.
 
vapviking,
cgod

cgod

Well-Known Member
vapviking said:
Don't hesitate to send it in. They will certainly take care of you.
Reminder; warranty time is also best time to ask for upgrade to Mighty, and it is indeed an upgrade. After 4 Crafty returns I switched, and now the 1 Mighty is over two years old.
Click to expand...

Would they even consider upgrading me on my first RMA? Tbh i chose the Crafty because of its size, and love it but wow already a problem 9 hours in with the 20% extra battery :cry::bang:
 
vapviking

vapviking

Old & In the Way
VapeCrafty said:
@vapviking Did you get it for free, in exchange to the Crafty or did you pay something on top?
Click to expand...
I paid the difference in retail price between the two.

cgod said:
Would they even consider upgrading me on my first RMA? Tbh i chose the Crafty because of its size, and love it but wow already a problem 9 hours in with the 20% extra battery :cry::bang:
Click to expand...
If you are inclined to want to do it, it can't hurt to ask!
 
VapeCrafty

VapeCrafty

New Member
Hey guys, i have my Crafty now for 4 days, and my battery goes down from 100% to 0% in 40min-46min. Thats something about 3 sessions. Its the newest version with 20% more battery life.
Greets!
 
vapviking

vapviking

Old & In the Way
VapeCrafty said:
Hey guys, i have my Crafty now for 4 days, and my battery goes down from 100% to 0% in 40min-46min. Thats something about 3 sessions. Its the newest version with 20% more battery life.
Greets!
Click to expand...
13 to 15 minutes sound like pretty long sessions. You might consider shutting it off between hits if your hits are not close together! Though it might require more power to get back to speed if you let it cool too much, something in between might help increase the number of sessions per charge.
 
Little Bill

Little Bill

Oldest stoner on FC
vapviking said:
13 to 15 minutes sound like pretty long sessions. You might consider shutting it off between hits if your hits are not close together! Though it might require more power to get back to speed if you let it cool too much, something in between might help increase the number of sessions per charge.
Click to expand...
I've had three (and still have two) Craftys and the battery does suck. Brand new I never got more than 6 sessions of about 5-6 minutes each until rapidly flashing light on turn off. It makes me rush to finish a session quickly. Now that my Craftys have about 20 hours each I get 4 short sessions until rapidly flashing blue on turn off. Biggest flaw with the design but great taste, draw, and portability.
 
VapeCrafty

VapeCrafty

New Member
Today we smoked one head with 4 people, everybody was high as hell.
We smoked about 15min with 15-20 draws. But I have to say, I had never own weed like this. It was so fucking sticky, I think thats the reason for our long session. I also used the dosing capsule, I never smoke without the capsules, its one of my favourite attachment for the Crafty.

Greets!
 
Mr Mellish

Mr Mellish

Well-Known Member
VapeCrafty said:
Today we smoked one head with 4 people, everybody was high as hell.
We smoked about 15min with 15-20 draws. But I have to say, I had never own weed like this. It was so fucking sticky, I think thats the reason for our long session. I also used the dosing capsule, I never smoke without the capsules, its one of my favourite attachment for the Crafty.

Greets!
Click to expand...

I'm with you; the dosing capsules are very high on my list of vape shit I love. I will never use my Crafty without them.
 
biohacker

biohacker

H.R.E.A.M
Do the capsules work well with a fine grind, or is medium/coarse suggested? My experience with the capsules was poor with a coarser grind, just lack of clouds which is to be expected. Just wondering if there is enough airflow with a fine grind in the cap, i'm guessing as long as you don't tamp?
 
biohacker,
VapeCrafty

VapeCrafty

New Member
biohacker said:
Do the capsules work well with a fine grind, or is medium/coarse suggested? My experience with the capsules was poor with a coarser grind, just lack of clouds which is to be expected. Just wondering if there is enough airflow with a fine grind in the cap, i'm guessing as long as you don't tamp?
Click to expand...
Hey, I use the grinder from Storz & Bickel, and I grind it fine as i can with it. The airflow is still great, also with this crazy sticky weed, and I push it well in there. I also like the clouds i get from it.
Today we go hiking, and we will try the Crafty on the go :)☀️

A few days ago, I had veery dry weed, and I get just 5-7 draws from it
 
VapeCrafty,
  • Like
Reactions: biohacker
biohacker

biohacker

H.R.E.A.M
Thanks @VapeCrafty I should have known better, that the s&b herb mill is designed to grind on the fine side! This could explain my lack of clouds and thick dense vapour. I think I tried fine back in my higher temp days (straight to 210) but the taste greatly suffered even on that first hit. And then I have issues with irritation and coughing. I'd love to try out the capsules again with fine grind at a more reasonable human temp.

The Crafty is the best vape for hiking IMO! Wide open airflow, great bowl size to get you where you wanna be. The only issue I find is that I also feel sort of rushed due to the conduction aspect of the heating tech. I wish they dialed down the conduction on it, or at least made the conduction ring removable for those of us that prefer more convection. I guess it would be a completely different device then though.
 
vapviking

vapviking

Old & In the Way
I am not a fan of very fine grind in Crafty/Mighty, without parsing the details too much. Medium always does it for me, assuming there's vg material, properly conditioned, dried, etc.
Also, finely ground material tends to escape from the capsule holes, before use, after use; and when it happens during use it will trap in cu screen or inside cu itself.

I've found the S&B grinder to be variable compared to grinders with holes that material falls thru, which tend to yield consistent results (of course there are ways to 'over ride' this, like grinding upside down, etc.) . The S&B results are a factor of how many turns you give it. So, if you you just turn once and done, you get a medium material. If you keep grinding away, because it has no escape, the result will be a fine grind.
 
lumholtz

lumholtz

New Member
My first unit died at 93 hours, was replaced under warranty, took delivery of new unit (2.52) and at 42 hours it is failing the same way as the last unit: 'temperature too low' warning, even at 25 degrees C ambient temp.
Pretty frustrated tbh, thought this unit might last a little longer under revised firmware and better battery life.
I never have the unit plugged in during use or while the unit is still hot, and it doesn't leave my house.
Think I might try for an upgrade to a Mighty this time, as I have lost faith in the Crafty, and sending them back every few months is not acceptable for a premium product at a premium price.
 
lumholtz,
You must log in or register to reply here.
Top Bottom