Cheap High Quality Bubbler

B

blazedd

Well-Known Member
ty guys, contacted the ebay guy and will wait to hear back. if not, that reclaim setup is perfect.. at least paying 8 bucks for a few pieces of glass and some clips, not just one piece, pretty good deal actually.
 
PoopMachine

PoopMachine

Well-Known Member
matthend said:
13.99 every couple of months is worth it to me for clean glass, even without reclaim.

Not much of a drinker, so I will evaporate and dab it most likely. I have tried to make edibles, but have yet to really feel them. That will be my mission this April in Denver, to feel edibles
Click to expand...

Kind of OT but if youre going to the Cup, be really diligent about knowing what you're getting with edibles. Strength varies huge there. Mrs P got hold of a piece of fudge that took her out of commission for an entire day and she's not a lightweight. There were multiple people even waiting in line to get into the Cup that had too much edibles and were freaking out, crying, having to lay down, etc.
 
Bongologist

Bongologist

JoJo Woodworks
Accessory Maker
@blazedd i can't find my last order for some reason but I'm pretty sure it was cleanclearglass or Kathy that had these even cheaper at 4+ and they let me mix various male/female joints in the 4. The keck clips are cheap, but if you don't take them off and on often they are fine.
 
Bongologist,
  • Like
Reactions: blazedd
PoopMachine

PoopMachine

Well-Known Member
Bongologist said:
@blazedd i can't find my last order for some reason but I'm pretty sure it was cleanclearglass or Kathy that had these even cheaper at 4+ and they let me mix various male/female joints in the 4. The keck clips are cheap, but if you don't take them off and on often they are fine.
Click to expand...

Watch out for Kathy.. Ive had a piece that tracking hasnt updated, even initially, in over a month. She doesnt seem too keen on making it right.

She initially told me it would be delivered this week. Tracking didnt update.. didnt figure it would. Now she said if it hasnt updated in a week, she will send another one.... almost 6 weeks later. Then I get to start the process all over again.

Not trying to bag on Kathy but my luck with her has been terrible.
 
PoopMachine,
Y

YungLeaner

Well-Known Member
Waiting to trigger on the recycler Hydratube until first review comes out. But I don't have that much patience so I may have to do it...is SunShine store a quick shipper?
 
John Lewus

John Lewus

Well-Known Member
YungLeaner said:
Waiting to trigger on the recycler Hydratube until first review comes out. But I don't have that much patience so I may have to do it...is SunShine store a quick shipper?
Click to expand...

Just do it! I eagerly await your review :) I am curious how well it balances on top of an EVO.
 
PoopMachine

PoopMachine

Well-Known Member
John Lewus said:
Just do it! I eagerly await your review :) I am curious how well it balances on top of an EVO.
Click to expand...

Still surprised they havent knocked off the Recyclo-Tube from Doughboy... for the Evo, it was the shiz.

20140816_170232.jpg
 
John Lewus

John Lewus

Well-Known Member
PoopMachine

PoopMachine

Well-Known Member
John Lewus said:
Ohhh That is nice. How much?

BTW I looked at the Recycler hydratube at http://www.dhgate.com/product/2016-new-hot-item-hydratube-9-5-inches-bubbler/372671070.html and for only $34.10 I just pulled the trigger. I guess my patience is all of 1 minute when it comes to GAS and cheap prices.
Click to expand...

They arent for sale any more. Amazing piece for the Evo. Hell, I took orders for the artist and I dont even have one.

China should totally knock it off tho.. its a great piece and deserves to be used by everyone even in knockoff form.
 
M

matthend

Well-Known Member
PoopMachine said:
Kind of OT but if youre going to the Cup, be really diligent about knowing what you're getting with edibles. Strength varies huge there. Mrs P got hold of a piece of fudge that took her out of commission for an entire day and she's not a lightweight. There were multiple people even waiting in line to get into the Cup that had too much edibles and were freaking out, crying, having to lay down, etc.
Click to expand...

Yeah I remember that story from before we went last year. It played a big role in my staying way on the safe side with edibles last year. This year we are staying a few extra days, and my mission is to 'feel' edibles this trip. Gonna do it the safe way, via dispensary bought stuff and take it slowly, but it is gonna happen
 
Duncan MacLeod

Duncan MacLeod

Well-Known Member
Is Steven's FTK the only one worth considering? There are many less expensive ones from sellers I'm not familiar with. Will other trusted vendors lick this design up?
 
Duncan MacLeod,
John Lewus

John Lewus

Well-Known Member
PoopMachine said:
They arent for sale any more. Amazing piece for the Evo. Hell, I took orders for the artist and I dont even have one.

China should totally knock it off tho.. its a great piece and deserves to be used by everyone even in knockoff form.
Click to expand...

That piece looks really nice but also looks like a pain to clean. I keep my glass spotless so I am soaking/rinsing every day. I find some pieces I hardly ever use because they are more difficult to run water through and get clean. Just emptying the water looks like a pretty involved effort. It looks like a lot of fun to hit though.
 
John Lewus,
PoopMachine

PoopMachine

Well-Known Member
John Lewus said:
That piece looks really nice but also looks like a pain to clean. I keep my glass spotless so I am soaking/rinsing every day. I find some pieces I hardly ever use because they are more difficult to run water through and get clean. Just emptying the water looks like a pretty involved effort. It looks like a lot of fun to hit though.
Click to expand...

Its not bad at all... pretty easy to empty and I cleaned them with ISO and PBW pretty regularly beings that I tested every one before they got sent out to make sure function was up to par.
 
PoopMachine,
riz0

riz0

Well-Known Member
Hey guys, I'm about to buy an arizer air and I'm pretty pumped.
Looking for suggestions on best cheap glass to get and best adapter to use.
I've seen 2 mentioned in the small bit of research I've done. FC-187 and D020. I'd definitely chose the 187 between those two options but what are the other good options out there for cheap?
Also, where is the best place to get an adapter (also, what is the best adapter? I've seen a few different ones but don't really understand the difference)?

Modnote: Removed link to counterfeit labeled glass.
 
Last edited by a moderator:
riz0,
mrbonsai420

mrbonsai420

Accessory Maker
Accessory Maker
Cjisohsocool said:
How durable is that joint? I love the piece but I'm worried it would crack right off at the slightest bump
Click to expand...

Well I had a hot ass enail in it all weekend passing it around with no trouble? This is the thickest piece of Chinese glass I own. 4mm I think. You never know with Chinese joints though! My GB-187 snapped with a tiny bunp but it was 1/2 as thick.
 
mrbonsai420,
A

AniMoney

New Member
Just bought an Underdog and am looking for a piece to pair with it. I'm currently looking at the D020-D and the FC-UFO, both on dhgate. Both are within my budget and have good reviews. I see the former recommended a lot online, but I'm more intrigued by the second one. The FC-UFO with the glass neck is pretty similar in form to the D020-D, but I also get the whip option which I've never tried but seems like it could be pretty fun especially in groups. But it looks like the perc on the D020-D is better?

Could someone with either offer some insight? I'd like to buy quickly since I know the shipping from China to USA can take a while.
 
Bongologist

Bongologist

JoJo Woodworks
Accessory Maker
My wife likes the D but I like the UFO. To me the perc is perfect in the UFO, good diffusion but not so much that it kills flavor. I also like the volume of the can better, the versatility and ability to add different mouthpieces. I think you can't go wrong with either.
 
S1N3

S1N3

Tarzan @ KloudSociety
twistedimageglass said:
Hi there, this is the artist who made the piece you are talking about and a few folks mentioned this thread to me today so I just wanted to chime in - I'll start by saying thank you for buying something from me and I apologize you still have to deal with a cracked piece. I started blowing glass late in 2013 and I think this piece was my first or second pendy rig I ever made, made within my first year (?) and I've never defended things I didn't do right. It was my ignorant choice of color that caused the problem to begin with - I've since learned it is very prone to cracking in deep encasement so I rarely even use it anymore. I still consider myself a beginner who has something to learn from anyone else working behind a torch but I'm getting better every day!

The reason I'm posting is because I disagree with how you said I handled the issue. I wanted to get that cleared up and hopefully still resolve your issue, if you want it resolved. It's very hard to search for messages that are this old on reddit so I'm doing this from memory...

My state only decriminalized paraphernalia about a month ago so I've always been VERY cautious about repairs coming back. I live less than 30 miles from DC, attention is paid to the mail around here. I tell people that they need to be absolutely spotless because if something goes wrong BOTH of our addresses are on the box and we BOTH could get in trouble. Plus, repairing a dirty piece is a stinky pain to deal with in any state.

Many glassblowers will charge a cleaning fee if something comes back dirty and I've never done that so I would certainly never smash something AFTER it has arrived here safely... what would be the point???

I offered several options (again, correct me if I'm wrong here - it's been a while)...

The option to clean it and return it for a full refund

...or clean it and return it for repair (with all expenses paid by me)

...or, because it was cosmetic only and didn't impact the function of the piece I also offered that you could keep it as-is for a partial refund

...or if you just didn't want to deal with the hassle of returning it and just wanted your money back you could smash it and send me a photo for a full refund.

I still feel that those options are fair and they are still all available to you but like you mentioned above - you never got back to me to let me know how you want to proceed.

I've had more sales on /EntExchange than any other Reddit user and can count on one hand the number of refunds I've had to give - or repairs I've had to do for things that were my fault but I always stand by my work and have always made it right. I feel comfortable saying I've got the sales history on reddit, and now growing on facebook, to confirm that.

Sorry for the long-winded message but I hope this addresses your concerns that I DO stand by my work and I DID attempt to make it right - and those offers still stand today so again, I apologize for the trouble and if you are interested please contact me on Instagram because I probably won't check this account as often and want to make sure I get back to you ASAP.
I hope this addresses your concerns that I DO stand behind my work and DID try to make it right - and still will, if you are interested.
I hope this addresses your concerns that I DO stand behind my work and DID try to make it right - and still will, if you are interested.
Click to expand...


Welcome to FC, I own a pendant rig from you =) I had a small issue with a pinhole sized hole which cause leaking. Fortunately I'm less impulsive to use my new glass until Im 100% sure its fine. After a quick water test I messaged him and had it repaired. Got a nice pendant and dabber for the inconvenience. Good quality work, at a affordable price.


Bottom , Front Row , 2 over from the left
z0xTq6u.jpg
 
Mangos

Mangos

Well-Known Member
Hey guys just wondering if any of you could enlighten me on something. I'm waiting on a couple of orders from DHgate, including the new Hydratube from SS which should have been here today - But in the shipping status it's just an X .

Handling Time Handling Place Shipping Status
2016-02-25 15:20:00 ZheJiangShengJinHuaShi yiwuqingyanliulantouzhan Posting
2016-02-27 00:35:00 UNITED KINGDOM GBGBLALA X

Also the delivery time is now 3-35 days , seems a bit long compared to any other order I've made in the past. Usually when it reaches my local sorting office I get it the next working day, to the UK that is.

Wondering if it's being held in customs or what . I know it's only a day late but I'm just curious as to what the X means. Probably nothing but curious if anyone else has come across this. I have contacted SS and am waiting for a reply.
 
Mangos,
Alan Partridge

Alan Partridge

Smell my cheese
@Mangos I'm still waiting for my FC Mod and FC Mouthpiece to turn up after 5 weeks. I've seen the delivery time change from 3-15 days, to 17 days to 35 days.

Apparently it reached the UK on Feb 24.... So waiting on customs. Once it's there how long it takes is one of those how long is a piece of string questions....
 
Alan Partridge,
  • Like
Reactions: Mangos
You must log in or register to reply here.
Top Bottom