Cheap High Quality Bubbler

pigfoot

Dabs are vapor too!
This Toro Clone [link removed] showed up a day early, just in time for shatterday! May be my favorite oil rig yet. 7.5 in. tall, 8 slit perc. Solid, thick glass, nice lipping. Really retains the flavor. Got this nail recently too. Tastes like quartz, with more surface area than a banger, it seems to vaporize oil really efficiently. The standard china ti carb cap is the same diameter, so it fits on, not over the dish. Works really well though, and gives the right amount of restriction for complete vaporization.

So the rig (I ordered 2) is from Kathy, and was wrapped in a kind of bubble wrap I hadn't seen before. Long tubes, instead of the usual bubbles. Very sturdy, it has thicker material than the usual bubble wrap. No external box, but a layer of thick plastic wrap. Very secure packing, everything arrived ok. Also, there was a paper sticker, with "D&K" and "Warranty void if removed". LOL....took that off right away. Wonder what she's thinking with that?
20160206_155427_HDR.md.jpg


Modnote: link to labeled counterfeit glass removed
 
Last edited by a moderator:

b0

Cloudy...
This [link removed] showed up a day early, just in time for shatterday! May be my favorite oil rig yet. 7.5 in. tall, 8 slit perc. Solid, thick glass, nice lipping. Really retains the flavor. Got this nail recently too. Tastes like quartz, with more surface area than a banger, it seems to vaporize oil really efficiently. The standard china ti carb cap is the same diameter, so it fits on, not over the dish. Works really well though, and gives the right amount of restriction for complete vaporization.

So the rig (I ordered 2) is from Kathy, and was wrapped in a kind of bubble wrap I hadn't seen before. Long tubes, instead of the usual bubbles. Very sturdy, it has thicker material than the usual bubble wrap. No external box, but a layer of thick plastic wrap. Very secure packing, everything arrived ok. Also, there was a paper sticker, with "D&K" and "Warranty void if removed". LOL....took that off right away. Wonder what she's thinking with that?
20160206_155427_HDR.md.jpg

Looks like a nice setup!! I will love one without the Toro logo, I limk my glass "clean". I'm also waiting for that exact nail :)
 
Last edited:
b0,

pigfoot

Dabs are vapor too!
Looks like a nice setup!! I will love one without the Toro logo, I lime my glass "clean". I'm also waiting for that exact nail :)

Label's just painted on, so easy enough to remove. I've always been against labels too, but I actually kind of like this one. The nail's been very interesting. On the first one I got, the dish was kind of lumpy, so he sent me another one, which is much better, and now I have spare. I've been really liking the new thicker, quartz bangers, but as soon as I saw this hybrid clone, I wanted to try it. The design on this provides a more airy hit than a banger, so a bit less flavor. But it works really well. Oil seems to spread out fast on the hot surface, and vapes more completely than my bangers. I think this would handle some large dabs. The dish is the perfect width for q-tip tech.
 

pigfoot

Dabs are vapor too!
I was considering the Toro clone, did it work well for you?

This Toro Clone [link removed] showed up a day early, just in time for shatterday! May be my favorite oil rig yet. 7.5 in. tall, 8 slit perc. Solid, thick glass, nice lipping. Really retains the flavor. Got this nail recently too. Tastes like quartz, with more surface area than a banger, it seems to vaporize oil really efficiently. The standard china ti carb cap is the same diameter, so it fits on, not over the dish. Works really well though, and gives the right amount of restriction for complete vaporization.

So the rig (I ordered 2) is from Kathy, and was wrapped in a kind of bubble wrap I hadn't seen before. Long tubes, instead of the usual bubbles. Very sturdy, it has thicker material than the usual bubble wrap. No external box, but a layer of thick plastic wrap. Very secure packing, everything arrived ok. Also, there was a paper sticker, with "D&K" and "Warranty void if removed". LOL....took that off right away. Wonder what she's thinking with that?
20160206_155427_HDR.md.jpg


Modnote: link to labeled counterfeit glass removed

I'd say it's my favorite rig so far. Distance from the mouthpiece to the joint is perfect, it's got the right amount of diffusion (low), and can size (small). Overall, it's a small rig, which some may not like, but I find it perfect. Parts are aligned well, consistent with the best china glass. Perc is welded to the base, so it's very sturdy, slits are flame polished, base is nice and thick, lipping looks great. The design prevents getting water in mouth.
 
Last edited:

ReggieB

Well-Known Member
Label's just painted on, so easy enough to remove. I've always been against labels too, but I actually kind of like this one. The nail's been very interesting. On the first one I got, the dish was kind of lumpy, so he sent me another one, which is much better, and now I have spare. I've been really liking the new thicker, quartz bangers, but as soon as I saw this hybrid clone, I wanted to try it. The design on this provides a more airy hit than a banger, so a bit less flavor. But it works really well. Oil seems to spread out fast on the hot surface, and vapes more completely than my bangers. I think this would handle some large dabs. The dish is the perfect width for q-tip tech.
I would be interested to hear how to easily remove logos from glass...
 
ReggieB,

b0

Cloudy...
I'd say it's my favorite rig so far. Distance from the mouthpiece to the joint is perfect, it's got the right amount of diffusion (low), and can size (small). Overall, it's a small rig, which some may not like, but I find it perfect. Parts are aligned well, consistent with the best china glass. Perc is welded to the base, so it's very sturdy, slits are flame polished, base is nice and thick, lipping looks great. The design prevents getting water in mouth.

Wow sounds like a really nice piece, you make me want to buy it :haw:

I was gonna order this one after new year:

http://www.dhgate.com/product/the-newest-arrival-toro-glass-jet-perc-heavy/255417029.html#pd-019

Awesome reviews, but not sure how big it is, anyone has it?
 
b0,

pigfoot

Dabs are vapor too!
pigfoot,
  • Like
Reactions: ReggieB

longdong38

New Member
Hi! I'm looking for a piece to accompany an Underdog using the NonG stems. I'll possibly use it for concentrates in the future. I want something that will retain a good bit of flavor (so not a ton of diffusion), but I also want a bit larger volume than something like the D020-D. I kinda like to take big rips. I'm trying not to spend more than ~$40.

Something like this would be great if it were a little larger, I think. This one's only 7":
20160206_155427_HDR.md.jpg


Does anyone have any suggestions for me? Thanks!
 
longdong38,

b0

Cloudy...
This guys just arrived:

qTSzK2p.jpg


DualiTi clone and 4mm banger+cap. Wasn't expecting both to come together, don't know wich one to try before :rofl:

It's my first time using domeless, any tips how to heat them?

I was thinking about heating the DualiTi from the sides of the dish until red and then wait around 30 seconds, should i wait more? heat it from top also?

And for the banger from the bottom until red and wait also around 30 seconds, should I wait longer because it's 4mm? heat it from the sides too?

Thanks!
 
b0,

pigfoot

Dabs are vapor too!
This guys just arrived:

qTSzK2p.jpg


DualiTi clone and 4mm banger+cap. Wasn't expecting both to come together, don't know wich one to try before :rofl:

It's my first time using domeless, any tips how to heat them?

I was thinking about heating the DualiTi from the sides of the dish until red and then wait around 30 seconds, should i wait more? heat it from top also?

And for the banger from the bottom until red and wait also around 30 seconds, should I wait longer because it's 4mm? heat it from the sides too?

Thanks!

I have those same nails, except my banger is 3mm. I heat the domeless from sides and top (mostly sides), for maybe 20 seconds? The banger I just heat from the bottom. Neither one gets red. I think you'll have to experiment with heating times. The crucial part seems to be cool down. I use a timer on my phone. Bit of extra work, but so worth it. The banger I let cool for 60 seconds, the domeless 55. For low temp (tasty) dabs, the oil should pool a bit, not vaporize instantly. That's where your carb cap comes in. The banger cap you posted didn't work for me, not enough restriction. I like this one. For the domeless nail, this cap works great, although it is too small to go over the nail, it just sits on top. After you put on the cap, keep inhaling to finish the dab. Q tip tech, or swabbing any remaining oil with a (you guessed it) Q tip, leaves the nail clean and ready for the next dab.
 
pigfoot,

b0

Cloudy...
I have those same nails, except my banger is 3mm. I heat the domeless from sides and top (mostly sides), for maybe 20 seconds? The banger I just heat from the bottom. Neither one gets red. I think you'll have to experiment with heating times. The crucial part seems to be cool down. I use a timer on my phone. Bit of extra work, but so worth it. The banger I let cool for 60 seconds, the domeless 55. For low temp (tasty) dabs, the oil should pool a bit, not vaporize instantly. That's where your carb cap comes in. The banger cap you posted didn't work for me, not enough restriction. I like this one. For the domeless nail, this cap works great, although it is too small to go over the nail, it just sits on top. After you put on the cap, keep inhaling to finish the dab. Q tip tech, or swabbing any remaining oil with a (you guessed it) Q tip, leaves the nail clean and ready for the next dab.

Thanks for your answers! Yeah I was refering to the cooling time, didn't express myself really well. Gonna try the banger right now, it's a bummer that the cap doesn't works, will try making the hole smaller with my finger if it doesn't get's too hot. if not I will use a marble or maybe the back of this pendant:

12519134_1664494703814538_1968908790_n.jpg


I have the same cap for the domeless and as you said it doesn't go over the nail. Nice to know that it will work :)

Plan to use the q tip tech too, I like my glass celan so would try to keep the quartz clean too :science:

Edit: Just tried the banger and loved it, much better than a nail and glob for sure. You where right about the cap, but if you use it upside down putting your finger in the hole, works pretty nice!
 
Last edited:

mrbonsai420

Accessory Maker
Accessory Maker
I noticed Sasquatch Glass have sale on. A few interesting pieces under $100.

Aww man! now I want this Beehive Bubbler. Looks pretty sweet! I already have a couple of Classic Glassmandoll Bubblers in the mail from a fellow FC member! I can't wait to try those out and post here.

http://sasquatchglass.com/product/blackbeehive/


EDIT: Nevermind... I pulled the trigger. Green Bee hive Bubbler on the way, I'll report back. Damn I need to stop, this is getting out of hand!

But what a deal for American Glass! I saw one of these for over $200 in High Times and thought it was Awesome!

Order Details

Product Total
Cart Subtotal: $75.00
Shipping: Flat Rate
Order Total: $75.00
Black Label Bee Hive Bubbler × 1
Colors:
Green
Total: $75.00
 
Last edited:
mrbonsai420,
  • Like
Reactions: Nugg

Mangos

Well-Known Member
Hey guys finally got round to making a small clip of me using the FC Mod and mouthpiece with an EVO.
https://vid.me/JCEu

Really enjoying this piece- great for those big hits . For the smaller hits I use the showerhead perc as an ashcatcher with a J-hook and get great flavor.

Again thanks to those who contribute these designs to the manufacturers and other forum members;Doubt I would have been able to afford or locate a VXL devastator or a piece similar to this at such a low price point.
 

mrbonsai420

Accessory Maker
Accessory Maker
Just picked up a couple of sweet old school Glassmandoll Bubblers! He used to sell on Etsy, Now he sells dildos there LOL. But the blue one is my new favorite vapor bubbler for sure, sorry GB-187 and D-020

72DA9423-F10E-4823-8607-EF7B9894C16A.jpg


6CEFB5CA-A576-4FB7-BCB4-C72DA1ACE080.jpg
BB097BAD-0DC7-4176-8CB4-7AD30B1984F9.jpg
 

weenstoned

Well-Known Member
ciNwoNW.jpg


Just got my ball rig from phoenix Glass. Pretty good. I think I was picturing it a bit wider in my head, but comparing to the pics on the ad it doesn't look much different. The inner ball is very well done, the outside of the piece is not perfectly round but not really noticeable unless you are touching it. Kinda wish it was all clear but the black accents look fine. Only done a couple dabs but seems to hit decent. Shipping took 10 days, will probably end up getting one of their Toro copies next unless they come out with something more interesting.
 
Top Bottom