Smokey the Bearington
Member
The final link I posted to the purr glass, would that also be chinese or is that a legitimate brand? Have always loved that style and would love to have it in the collection, wouldn't mind it from DH gate though!
Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
The final link I posted to the purr glass, would that also be chinese or is that a legitimate brand? Have always loved that style and would love to have it in the collection, wouldn't mind it from DH gate though!
weenstoned
Well-Known Member
I have the CCG fab egg baby bottle, well actually I have two. I ordered the white and they sent a clear one which is pretty big which I am pretty sure was the prototype or maybe initial run. Once I messaged them they sent the white version I ordered which was smaller and matches their pictures. Would definitely recommend, very symmetrical. Has pretty nice flavor and looks great.
Also seems like the smokecartel one is from CCG or CCGs supplier. Save your money.
Also seems like the smokecartel one is from CCG or CCGs supplier. Save your money.
EVlL 55
Well-Known Member
...I have a pocket dropdown from purr that I got from dankstop...
..it's one of those pieces or brands that iv only seen on the dankstop site,..but I have seen them blowing on the you tube,...so..
I have a few pieces that are chinese,..and w/ a simple perc,..they're fine....
But they seem to have nice thick bodies,..which is what you see and hold,..some up to 7mm thick...
...buy that means dick if the percs are basically made of sugar glass.
I dropped a 2.5 ft.,..double 10 armed,2 tiered piece staight on its base from about 4 ft. and it didn't bust...but the percs fell like a dropping chandelier
..it's one of those pieces or brands that iv only seen on the dankstop site,..but I have seen them blowing on the you tube,...so..
I have a few pieces that are chinese,..and w/ a simple perc,..they're fine....
But they seem to have nice thick bodies,..which is what you see and hold,..some up to 7mm thick...
...buy that means dick if the percs are basically made of sugar glass.
I dropped a 2.5 ft.,..double 10 armed,2 tiered piece staight on its base from about 4 ft. and it didn't bust...but the percs fell like a dropping chandelier
Smokey the Bearington
Member
THANK YOU!!! I have a daughter on the way and REALLY want this rig, will be ordering tomorrow along with a banger!
Just need to find out about that other rig now!
Appreciate your help, definitely agree. Did some research and can't find them anywhere really besides those 2 websites. Was definitely interested in the piece though
little maggie
Well-Known Member
Has anyone tried the purr2go that's on massdrop?
I want a 12-15inch beaker without a diffuser.
http://m.dhgate.com/product/4-colors-18-8mm-joints-12-quot-roor-beaker/249653346.html#s1-3-1
Just don't know if 7mm is too thick to see vapor well?
http://m.dhgate.com/product/4-colors-18-8mm-joints-12-quot-roor-beaker/249653346.html#s1-3-1
Just don't know if 7mm is too thick to see vapor well?
violentz313
Well-Known Member
Anyone familiar with ccg replacement policy? How difficult are they to deal with? I just received my ccg egg completely shattered and I'm hoping for a painless exchange
weenstoned
Well-Known Member
You might have to buy this item: http://www.dhgate.com/store/product/glass-bongs-water-pipes-somking-products/228772550.html but it's only a dollar. I would start by messaging them with a pic of the broken one and asking for a replacement.
violentz313
Well-Known Member
ok o cool thanks, I've just never got a broken piece so I was hoping they would easily replace it
mrgohamilton
Well-Known Member
"Sunshinestore" straight fab (if anyone still cares lol). Function starts at 0:15
Just a quick size comparison between the different eggs (9 inch pink and 12.5 inch clear) and a d-cycler compared to the straight fab, as well as a function test with and without a nail.
function isn't bad if you have strong lungs but their needs to be more restriction to the air flow. It's an 18mm which I don't like either (just a preference).
The straight fab is taller than the 12.5 inch clear CCG egg.
No problems with any part of the glass, glass is vey thick, "swiss cheese percs" are perfectly formed and no bubbles or machine marks. very nice aesthetically but haven't been using it due to my lack of a 18-14mm adapter lol...
Sunshinestore also sent me a 14mm Female - 14mm male dropdown "free" of charge. just asked them to replace the bowl and nails with the dropdown. They sent me the dropdown AND the nail and dome
Just a quick size comparison between the different eggs (9 inch pink and 12.5 inch clear) and a d-cycler compared to the straight fab, as well as a function test with and without a nail.
function isn't bad if you have strong lungs but their needs to be more restriction to the air flow. It's an 18mm which I don't like either (just a preference).
The straight fab is taller than the 12.5 inch clear CCG egg.
No problems with any part of the glass, glass is vey thick, "swiss cheese percs" are perfectly formed and no bubbles or machine marks. very nice aesthetically but haven't been using it due to my lack of a 18-14mm adapter lol...
Sunshinestore also sent me a 14mm Female - 14mm male dropdown "free" of charge. just asked them to replace the bowl and nails with the dropdown. They sent me the dropdown AND the nail and dome
"Sunshinestore" straight fab (if anyone still cares lol). Function starts at 0:15
Just a quick size comparison between the different eggs (9 inch pink and 12.5 inch clear) and a d-cycler compared to the straight fab, as well as a function test with and without a nail.
function isn't bad if you have strong lungs but their needs to be more restriction to the air flow. It's an 18mm which I don't like either (just a preference).
The straight fab is taller than the 12.5 inch clear CCG egg.
No problems with any part of the glass, glass is vey thick, "swiss cheese percs" are perfectly formed and no bubbles or machine marks. very nice aesthetically but haven't been using it due to my lack of a 18-14mm adapter lol...
Sunshinestore also sent me a 14mm Female - 14mm male dropdown "free" of charge. just asked them to replace the bowl and nails with the dropdown. They sent me the dropdown AND the nail and dome
I care! :-)
This is all pretty new to me and with 100's of pages to this thread, posts like yours are very helpful :-)
Hey guys, just wondering if the fc-710 from steven would work properly with my portable vape that has 14mm water pipe attachment. It works in my beaker bong but need one just a water pipe for my vape, thanks. Also if you have something to suggest that works better with portable vapes for a cheaper price let me know, Thanks. 
Last edited:
anyone get this worked fab egg from cnmenglass? http://www.dhgate.com/store/product...ng-9-inches-skull-bong/247795643.html#ctabBox
or this ball rig from cnmen? http://www.dhgate.com/store/product/2015-new-recycler-bongs-water-pipe-clear/250199333.html
or a hitman stack http://www.dhgate.com/store/product/2015-bong-new-hitman-glass-sundae-stacks/251597958.html
what do you guys think?
or this ball rig from cnmen? http://www.dhgate.com/store/product/2015-new-recycler-bongs-water-pipe-clear/250199333.html
or a hitman stack http://www.dhgate.com/store/product/2015-bong-new-hitman-glass-sundae-stacks/251597958.html
what do you guys think?
FC-710 has a 14mm MALE fitting ( male = frosted section on outside, female = frosted section inside of joint). It's most likely your vape's 14mm water pipe attachment is a 14mm male fittingHey guys, just wondering if the fc-710 from steven would work properly with my portable vape that has 14mm water pipe attachment. It works in my beaker bong but need one just a water pipe for my vape, thanks. Also if you have something to suggest that works better with portable vapes for a cheaper price let me know, Thanks.
I'm betting the FC-710 would require a female-female adapter to make it work with your setup. You're better off looking at something else. Unfortunately there aren't may 14mm female bubblers on DHgate.
*However* the FC-711 is a 14mm female and actually one of my favorite pieces currently
Just bought a 7mm thick beaker bong, would have bought it anyways because a 12" beaker bong has been on the wish list a while. will vapor be too hard to see through this glass! That sounds thick to me, should I also order a thinner bubbler maybe? Because seeing the vapor building in the bong is very important for me, if I can't see vapor easily through the beaker I won't be using it for vapor bonging.
snackmaster
Well-Known Member
It should be fine. I used to vape through a 9mm beaker and I didn't have any problems seeing the vapor.
Frederick McGuire
Aggressively Loungey
:hmmm:
I don't think I've ever seen this question before....
It's clear glass.
It will be fine.
Just look at the picture of the piece you want:
You can clearly see that black background through it.
It's clear.
If that order is all through to single seller you could try contacting them and telling them you were interested in getting a bulk order of X pieces.
They should be able to arrange a discount for you
Huh?
More restriction would mean you'd need even more lung strength to get it to perc:hmmm:
I can't really think of any reason I'd want a piece to have MORE drag...
Imo less drag is always better...
Hashsnob
Member
Ordered the FC-710, two 3mm quartz bangers, and 3 slick mats.... except DHgate pops up "internal error, blahblah order not processed" or something about it not going through and to place the order again. So I keep trying, keep getting errors. However... I check my bank and I have been charged 78.05 by them, the price of my order.... except no order has gone through, wtf... I contact dhgate to refund me and they keep asking for a receipt, lol... there is no receipt! and then their live chat goes down for maintenance as soon as I start to get upset... how convenient...I guess I'll wait 24 hours and then proceed.
BTW, what are your guys's feelings on the thicker 3mm and 4mm quartz bangers? too thick? Or perfect for low temp dabs? 4mm sounded like it was a bit much.
BTW, what are your guys's feelings on the thicker 3mm and 4mm quartz bangers? too thick? Or perfect for low temp dabs? 4mm sounded like it was a bit much.
mrgohamilton
Well-Known Member
:hmmm:
I don't think I've ever seen this question before....
It's clear glass.
It will be fine.
Just look at the picture of the piece you want:
You can clearly see that black background through it.
It's clear.
If that order is all through to single seller you could try contacting them and telling them you were interested in getting a bulk order of X pieces.
They should be able to arrange a discount for you
Huh?
More restriction would mean you'd need even more lung strength to get it to perc:hmmm:
I can't really think of any reason I'd want a piece to have MORE drag...
Imo less drag is always better...
Sorry was late night writing that lol let me try and clear it up.
there's literally almost no drag at all. It's like there is too much air going through it way too fast and doesn't allow for a slow steady hit. Pulling on it ever so slightly still has me trying to gasp for breath and take the rest of the hit.
Before even getting the vapor into the tube you end up sucking in the air already in the tube above the water (which is quite a lot) due to it being so tall. I think the mouthpiece hole needs a little shorter diameter and it would allow slower pulls. That, or a quite a few less holes on the perk disk
The water level is quite finnicky also. Pulling a little too hard and your in for a swim
I'll test it some more later today with some drop downs and stuff and see if that helps out.
Last edited:
Can't wait to find out your results. My only complaint about the FC-710 (barely a complaint even) is how absurdly loud it is. Everyone on your block knows when you hit that thingthe sound grew on my fast, but the volume was definitely surprising
Well, after having my FC-710 for two days, I will say I like it. Yes it's absurdly loud with that ball clinking around, but there's so much flavor. I'm really quite happy with it. If you have the proper adapters, yes it does work good for vapes (especially one with a powerful heater so you can milk the glass). Although it's small, so I wouldn't use it with a huge vape like my LSV
My only complaint is the damn 14mm male fitting (and the fact that it's pretty loud - certainly not using this piece when my wife is sleeping upstairs!)
ragnorokk
DERP
Sweet, I think I'll pick up some adapters to get using mine for flowers. I agree that the fixed 14mm male connectors are, in general, annoying. And I wish there was a larger one available (maybe the full sized bates x worm diffusion pump style, but there are a number of delicate looking areas on that...). Due to a communication snafu, my homie got me an FC-710 as a gift, so I've got 2 -- guess ones gonna be oil and one flower. Worse things have happened in this world...
Btw, I agree about a little drag. I don't like it to hit too freely, unless it's impossible to get a mouthful of water. My low drag pieces tend to need a slightly restrictive vape paired with them, so I'm not chugging water. I like a large, voluminous cloud, and I find a tiny bit of restriction helps me get my milk on properly.
Last edited:
mrgohamilton
Well-Known Member
I'm in 2 now too lol , nice to know there's a fellow Atlantan here
Nice one, guess this is my next order :-) Cheers for the feedback