Cheap High Quality Bubbler

Frederick McGuire

Aggressively Loungey
Has anyone seen a way that one could connect a little 510 ecig-based oil vaporizer to one of these vapor blunts? By my approximation, I'd need a GonG joint on one end and the other side would need to be the correct size to press fit on the silicone rings of the vape. Anyone ever seen something like that? Or know where i could buy one?
It's not a 510, but I think the KISS Globe by W9 tech uses the same sized siliicone rings as any other setup?
Anyways, I recently broke my globe :( and needed a replacement so that I could vape the rest of my errl.

It turns out with a bit of pressure it will fit inside an 18mm male joint. (I was using a useless DHgate 18mm male cone piece as a replacement mouthpiece)
So potentially all you'd need to connect to that nectar collector you posted is an 18mm male to 14mm male adapter :)
(just double check the fit in an 18mm male joint before you go out and buy an adapter)

Edit:
Picture is worth 1000 words :)
1280.jpg
 
Last edited:

dabsonthemountain

Well-Known Member
It's not a 510, but I think the KISS Globe by W9 tech uses the same sized siliicone rings as any other setup?
Anyways, I recently broke my globe :( and needed a replacement so that I could vape the rest of my errl.

It turns out with a bit of pressure it will fit inside an 18mm male joint. (I was using a useless DHgate 18mm male cone piece as a replacement mouthpiece)
So potentially all you'd need to connect to that nectar collector you posted is an 18mm male to 14mm male adapter :)
(just double check the fit in an 18mm male joint before you go out and buy an adapter)

Edit:
Picture is worth 1000 words :)
1280.jpg
I actually use those slides as dabbers/carbcaps. It fits over my quartz nail and one of my domes perfectly. I even torched the little handle until it was red and pulled it into a little point too, so I can use it as a dabber and just flip it and drop it on the nail. It works perfectly.
 

MilkyMondays

Well-Known Member
So a new shop opened up near me and they have an in house up-and-coming blower who is pumping out beautiful pieces/bubblers for GREAT prices.
Got this done custom:
Full_Size_Render.jpg

choice of dome, dabber, or drop down--The Pill Recycler. I'll try to get a video up but I'd love to hear your thoughts.
Around $150 depending on size.
 
Last edited:

S1N3

Tarzan @ KloudSociety
Christened the new Torus v2 at @Deadshort480 dab lab this weekend. Some function video's of Steven creations


http://www.dhgate.com/store/product/advance-booking-2015-new-high-quality-glass/218127026.html

3.5/5 Could argue a 4/5 but its a little big. This is also strictly a flower combustion or enail can as the vapexhale and solo proved too much restriction. Overall I am still happy but would caution anyone intending to purchase this for vape exclusivity. The size/ dimensions are also on the large end for a rig, would love to see this even smaller.


Here is another vid I put up on the design thread. Relatively new from Steven



http://www.dhgate.com/store/product/mothership-straight-fab-2015-new-height-27/239957059.html

5/5 Works well on vapes, enails, and combustion.
 
Last edited:

Sasquatch_Jr

Well-Known Member
Has anyone seen a way that one could connect a little 510 ecig-based oil vaporizer to one of these vapor blunts? By my approximation, I'd need a GonG joint on one end and the other side would need to be the correct size to press fit on the silicone rings of the vape. Anyone ever seen something like that? Or know where i could buy one?

The Delta 3D Studios Crafty adapters work great with eCigs. He also sells a universal adapter which would probably work as well. I have used them with both the FC-Cake (see pic) as well as a Sunshine Store PNWT which is similar to that nectar collector.

fIgn2vF.jpg
 

alltoreup

Damn you, party liquor
Yeah I did, mine keeps getting progressively worse, the floor where the pillars are welded is cracked sort of like a Mercedes emblem which also leads to the perc which also circles around almost 360. I'm hoping he makes good and doesnt send out something worse or completely different. We shall see, Like I said I'd be really pissed if I spent the 250-300 I see the LHS selling this rig for!!!! I wonder some times if we dont get the rejects and the high quantity sales people get the better grade? If customers come back to head shops with multiple complaints of pipes just self destructing as we have seen, how long is he going to be able to have a decent reputation to keep his glass sales going? It is slowly destroying itself,and is no longer operational:( leaking from multiple spots:disgust:

Got back into town to snap pics of the FC-1000 and mine was even worse after just sitting in the dark for a week. I was able to get some good pics of the cracks and sent Steven a message. He responded pretty promptly - The gist: my friend you should tell me early. It is quality problem. I send replacement. I messaged him back to see if he needed an address or anything and haven't heard back.

@ou812? Have you gotten any shipping notices on your replacement yet?
 

weenstoned

Well-Known Member
Just got my fab egg baby bottle from Clean & Clear Glass. Pretty nice except they sent me all clear instead of white. Will be trying to get them to send the correct piece or at the very least refund the extra cost.

Has pretty good flavour as the perc is just four big (well for a perc) holes. Only real downside is that it is a bit tippy with a drop down and enail as the base is mostly hollow. First China piece that was bigger than I expected though as the description states 7 inches but it is actually 9 inches.
 

weenstoned

Well-Known Member
Looks like the can is probably smaller than Stevens which is probably a good thing as I think some have mentioned that his is huge. Hard to tell if the drain is restricted/pinched like it should be. Promising but water test is definitely needed.
 

420boi

Well-Known Member
Looks like the can is probably smaller than Stevens which is probably a good thing as I think some have mentioned that his is huge. Hard to tell if the drain is restricted/pinched like it should be. Promising but water test is definitely needed.

the $45 price tag makes you wonder if steven is overpricing his stuff :/
 
420boi,

weenstoned

Well-Known Member
Hard to say but I think CCG is a decent amount bigger than Steven so I could see them being able to price stuff cheaper. Though the fact that there's no water test for the CCG Torus when they posted them right away for pieces added after, and that it is 10% off might be a tad suspicious.
 

Stu

Maconheiro
Staff member
I can't be the first to request this: We need a best of thread that just has a pic and a link. Maybe criteria being that at least 2 people have reviewed it positively.
Feel free to create a new thread for this purpose if you would like to. We can make it a "post only" thread meaning that discussion should take place in this (CHQB) thread so as not to clutter it up.

:peace:
 

flotntoke

thoroughly vaped
I can't be the first to request this: We need a best of thread that just has a pic and a link. Maybe criteria being that at least 2 people have reviewed it positively.

AWESOME idea!!! There are already plenty with pics in this thread to start with. Let us know when you set it up.

RIe2Fe8.jpg

The new UFO is awesome! So versatile, and the can is fosters oil can large! The improvements are great, thank you so much Steven! The collab effort on the new UFO was incredible I feel it's the most worthy of the FC label! A special thanks to @EverythingsHazy @blankrider and the rest of fellow FC fam!​

ARGH!!!! I had made my mind up to NOT get this after the issues that were reported. Now I feel almost obligated. So torn, and all of my other glass is looking lonely again. They whisper every time a slight breeze goes across their mouthpieces or GonGs.... "Go ahead, you know you want more glass."

the $45 price tag makes you wonder if steven is overpricing his stuff :/

Huh? If $45 is overpriced, what would you call the exact same piece for $150 at a LHS?
 

flotntoke

thoroughly vaped
There ya go! Plenty of people who don't know about this thread (or even FC) would love to have that piece for $150. Nobody is saying it's US glass, so IMO no fast one. Just commercial business at its finest.

IMO if you get a something that makes it in one piece, functions well and you enjoy using it for less than $50 - you're doing pretty damned good! :tup:
 
@Melting Pot Is that even Steven's skyline he has in the back of his shot. I have seen dhgate watermarks on there pics so they prob do not even have the glass yet or they are so lazy they can't take their own photos. Take it fo what it's worth.
 
ConstanlyConcentrated,

420boi

Well-Known Member
AWESOME idea!!! There are already plenty with pics in this thread to start with. Let us know when you set it up.



ARGH!!!! I had made my mind up to NOT get this after the issues that were reported. Now I feel almost obligated. So torn, and all of my other glass is looking lonely again. They whisper every time a slight breeze goes across their mouthpieces or GonGs.... "Go ahead, you know you want more glass."



Huh? If $45 is overpriced, what would you call the exact same piece for $150 at a LHS?

no i mean steven's torus is overpriced compared to ccg's (its literally double the cost)
 
420boi,

Frederick McGuire

Aggressively Loungey
no i mean steven's torus is overpriced compared to ccg's (its literally double the cost)
Steven is also the only seller I know of who's actually producing stuff FOR US.

It seems to be paying off with all the new designs and such, but they still actually have to do some R&D on these pieces too, even if it's a knockoff.

Just look at how many designs the Taurus had to go through - that's time and materials cost that steven needs to recoup...

I personally think Stevens items tend to have bicker glass too, but I can't confirm that...

basically, IMO, no, Steven isn't overpricing his stuff...
Some of it may be getting a bit more expensive, but they are intricate designs, or large items etc...
 

HomeFree

Well-Known Member
The Delta 3D Studios Crafty adapters work great with eCigs. He also sells a universal adapter which would probably work as well. I have used them with both the FC-Cake (see pic) as well as a Sunshine Store PNWT which is similar to that nectar collector.

Sasquach, that looks awesome! I bet a lot of people would buy those if ratchett (I think it is ratchett) would promote them more, maybe in the ecig portables area? maybe he already does.

I have inverted a glass globe style into a female 14 mm inlet on my D020 in the past that has been broken for a good while unfortunately. Worked pretty nice, left the glass globe part on I THINK - can't really remember, but I think you can do it without the globe part because of the rubber grommets on the atomizer attachment. I have even tried using a regular ecig through it as well, which is pretty tasty and I didn't even think would work well. But not much reason to run an ecig through a bong other than to see what it is like.

Recently I saw a bubbler made especialy for those atomizer types, and it was affordable too - less than $30 delivered. Can't remember where I saw it. Oh yeah, on ineedhemp.com - divinetribe. I think that's where I saw it. I was thinking about making an order over there for a friend and I to save money on shipping, so I might pick one up.

http://ineedhemp.com/images/DSC05567.JPG

$23
 
Top Bottom