Cheap High Quality Bubbler

NickDlow

NickDlow

Log Hog
Keep in mind once they create a shipping label it's considered shipped. Once they actually physically drop it off or it gets picked up by their mail service and entered into the system that's when the tracking will update.
 
MinnBobber

MinnBobber

Well-Known Member
Dr200 said:
I have some quality issues with mine. The base is not level and rocks. When pushing down on one side, I just fit a credit card in the space. Its not that bad but its annoys me.
Click to expand...
...............................................................

I have a hydratube base/holder that's like this, not level and it rocks.
I was thinking of trying to fix it, something like getting a mousepad and cutting to shape/ trim a thin slice off or add a little slice where needed and glue it on.
It is a nuisance and should have been caught thru basic quality control.
Anyone ever try this or have any other ideas on how to fix?
 
MinnBobber,
  • Like
Reactions: SSVUN~YAH
SSVUN~YAH

SSVUN~YAH

You Must Unlearn, What You Have Learned...
virtualpurple said:
Has anyone else ordered a UFO since the 4th? I'm curious to see if others are in the same limbo I'm in.
Click to expand...
I ordered one with two other pieces the FC-711 shipped immediately then just a couple days ago my FC-186 and UFO shipped. Though now you guys have me a bit worried. Why did mine ship when others are waiting? :shrug: Will keep ya posted!
 
B

blazedd

Well-Known Member
dabsonthemountain said:
But if I take my rig from kathy cleaned, and my new american minitube cleaned, and take one dab out of both, the minitube will have no trace of a dab. The rig from kathy has claim right away.
Click to expand...
dabsonthemountain said:
I'm not talking floating claim from a disgusting rig. I'm talking you just cleaned your rig, but floating claim forms in little specks on the water surface after 3-5 dabs. Then it starts to collect on the worked section of the downstem, then a spot where bubble sit stagnant. Then I clean it. It's mostly perc form as weenstoned said, but theres something else or else to it at least that claim would stick right away in the minitube.
Click to expand...
Alright so I've been testing it out, I've done about 3.5 dabs (1 shitty dab) in my kathy and it's still clean... I tried to look everywhere, every tiny little corner, it's all clean man. I do use a quartz banger, but I have no idea if that is what is causing your kathy to instantly claim up like that... really strange man.

I was so tempted just to go back to american glass to actually compare this, but I couldn't even find a decent ONE perc rig for under $200... They were pretty bad before, but smoke shops are a fucking joke now.
 
cybrguy

cybrguy

Putin is a War Criminal
I would think that the American blowers might drop their prices a little to get some of the china glass customers, but that doesn't really seem to be happening. Maybe over a little more time...

Keep in mind that the whole glass customer base is NOT concentrating on china glass quite as much as we are here. We are into this as a group, and not everyone reads FC. Many buyer either don't know that china glass even exists, or don't know that the glass they are buying at the LHS is china glass.
 
063_XOBX

063_XOBX

Ganjapreneur
cybrguy said:
I would think that the American blowers might drop their prices a little to get some of the china glass customers, but that doesn't really seem to be happening. Maybe over a little more time...
Click to expand...
An American Lampworker I know was very interested in the idea of "reverse engineering" DHgate glass to offer cheap American made versions after I showed her my Cmeng Cheap Fab Egg. I'm sure she's not the only one.
 
cybrguy

cybrguy

Putin is a War Criminal
That would be kinda funny to see it going in that direction. Anything to make special glass accessible I say...
 
cybrguy,
weenstoned

weenstoned

Well-Known Member
I don't really see any reverse engineering being involved. American glass blowers just need to decide to set their prices lower. Once anyone blows an egg they automatically price it at over $500.
 
Rusty778

Rusty778

Getting Lost
dimildarko said:
I've heard larger pieces are not great for running vapes through, is this true? What would be a taller alternative to my current D020-D. I would like something that would be level with my mouth at my desk instead of me having to hunch down since the D020-D is so short.
Click to expand...
dr demise said:
Be careful what size bong you buy if you intend to use with vapes. I've got a Weedstar Big Bang which is about 30cm tall, and while its great for combustion, its horrible to use with vapes.....feels like you are sucking a golf ball through a straw.

Definitely stick with smaller bongs for vapes, I learned the expensive way.
Click to expand...
I feel a large part of this is the vape you use due to differing restriction, and extraction abilities. Something like an EVO or herbie will have no problem milking up a large volume piece, with minimal drag. Whereas with a solo, you may have some hard drag with multiple honeycombs, and large volume pieces.
 
Rusty778,
turdhole

turdhole

vagabond
having trouble deciding between these two.
2015%20new%20Mobius%20Matrix%20sidecar%20glass%20bong%20birdcage%20perc%20glass%20pipe%20thick%20glass%20smoking%20pips%20joint%20size%2018.8mm%20FC-187%20V2.jpg

http://www.dhgate.com/store/product/2014-new-matrix-sidecar-glass-bong-birdcage/214701656.html $45

or

2015%20NEW%20Height%2015.5cm%20Glass%20Cake%20bongs%20thick%20glass%20cake%20bubbler%20with%20Mini%20bidcage%20Prerc%20glass%20smoking%20pipe%20joint%20size%2018.8mm%20FC-Cake.jpg
http://www.dhgate.com/store/product/2015-new-height-15-5cm-glass-cake-bongs-thick/236437216.html $40

anyone tried the sidecar cake yet?

edit. i went with the cake.
 
Last edited:
VapedNBaked

VapedNBaked

Member
I'm considering to get a faberge egg. Most users here seem to be very happy with the one from cnmengglass. There is also some other nice one that I'm interested in:
rBVaGlVS3tGAeYxlAACKuYEt_mI861.jpg


http://www.dhgate.com/product/2015-new-10-quot-inch-glass-bongs-mothership/239312071.html
http://www.dhgate.com/product/2015-new-glass-bong-10-inches-faberge-egg/240478598.html
http://www.dhgate.com/product/glass-bong-2015-new-glass-faberge-egg-water/240485611.html

It has less holes than most other eggs, but I really like the simple and clean design.
Currently available for $45 (without accessories).

Does anyone already have it? Maybe from some other seller? I couldn't find anything yet.
 
ataxian

ataxian

PALE BLUE DOT
turdhole said:
having trouble deciding between these two.
2015%20new%20Mobius%20Matrix%20sidecar%20glass%20bong%20birdcage%20perc%20glass%20pipe%20thick%20glass%20smoking%20pips%20joint%20size%2018.8mm%20FC-187%20V2.jpg

http://www.dhgate.com/store/product/2014-new-matrix-sidecar-glass-bong-birdcage/214701656.html $45

or

2015%20NEW%20Height%2015.5cm%20Glass%20Cake%20bongs%20thick%20glass%20cake%20bubbler%20with%20Mini%20bidcage%20Prerc%20glass%20smoking%20pipe%20joint%20size%2018.8mm%20FC-Cake.jpg
http://www.dhgate.com/store/product/2015-new-height-15-5cm-glass-cake-bongs-thick/236437216.html $40

anyone tried the sidecar cake yet?

edit. i went with the cake.
Click to expand...
I have the top one FC187
The one you don't have listed: FC186 I like a lot.
OK WERE ALL different and some claim they lose flavor?

By the Beach we have GSC and with a FC186 my goodness!
 
turdhole

turdhole

vagabond
ataxian said:
I have the top one FC187
The one you don't have listed: FC186 I like a lot.
OK WERE ALL different and some claim they lose flavor?

By the Beach we have GSC and with a FC186 my goodness!
Click to expand...

im only really interested in something bubblerish with a recessed (dewar?) joint.
 
turdhole,
rakka

rakka

Vaped
Nugg said:
@Rusty778 and anyone else interested in how a solo performs with a large piece should read back a few pages. I posted a gif of the fc-1000 being milked with the solo set on 7. It works wonderfully.
Click to expand...

Exactly this. Sure, not all of them will work but it's plain wrong to assume that you can't enjoy vaping through larger bongs/bubblers in addition to the more common D020(D)/GB-187 etc. No need to exclusively stick to little bubblers. Even with the Solo.
 
BoogerMan

BoogerMan

Well-Known Member
I think most users here on FC enjoy the bubbler style because they vape sitting at a desk or table.

This makes the bent neck very convenient, however straight tubes aren't ideal for those who sit and vape ;pd;

Any low restriction vape will work well in a small or large waterpipe. A larger waterpipe will just take a little more lung power to clear. And as it was said before, a larger waterpipe has more glass surface area for the vapor to come in contact with and condense on, which may not be desirable by some :2c:

:peace::leaf::tup:
 
Last edited:
You must log in or register to reply here.
Top Bottom