Cheap High Quality Bubbler

Haakkon

Well-Known Member
What are all of the parts required to make that? I think it'd be perfect if I pre-set this up for a friend who loves vaping but doesn't know where to start in regards to buying one himself. He has suffered a car accident and has trouble with some tasks due to a brain injury; and this seems easy to use and clean!

  • Bubbler - DHGate $32
  • Lotus Vapor Cap - $70
  • Lotus Water Adapter - $25
  • Torch lighter - $10
  • 14mm to 18mm adapter - eBay $8
I use the Zico T38 lighter, you can get it on Amazon for about $10. There's lots of other possible lighters to get based on preference.

I honestly believe with this water setup the lotus is really easy to use. As long as you can hold the lighter above the cap while you draw you can use it. With the bubbler it's much easier to see vapor coming from the lotus so it takes much less technique than with the pipe stem.
 
Last edited:

flickyourbic

Well-Known Member
Well the Mobius G186 got here. It's pretty sick, but there's a flaw. The bottom perc is crooked! It's a little disappointing. I don't know how much it's effecting functionality either. I've been dabbing off of it though and it hits nice. Much more work to clear than the D020.

There's also another weird imperfection on the glass. Almost like a small chip or something? I don't know how to explain it. Anyways I'm thinking about messaging the seller and seeing if they'll do anything about the perc. I'd be okay with a partial refund but for $63 I feel like it's worth bringing up. I had the intentions of trying to flip this piece but I may just keep it.

Also got the E-Nano. All I have is a 14mm gong. I tried to rig it to an 18/18 adapter and it just wasn't working. Need an 18/14 reducer. Did some dry bowls off the stem and it's a bit too harsh for my liking dry.
 
flickyourbic,

various127

Well-Known Member
rBVaGlRVC6yAAFBPAACNLdKKmqc609.jpg
new%20two%20function%20green%20glass%20bongs%20smoking%20water%20pipe%20with%20Titanium%20Nail%20can%20for%20tobacco%20and%20oil%20rig.jpg

http://www.dhgate.com/product/new-two-function-green-glass-bongs-smoking/194745788.html

Brown%20color%20glass%20bongs%20water%20new%20percolator%20joint%2014.4mm.jpg

http://www.dhgate.com/product/brown-color-glass-bongs-water-new-percolator/199022307.html

To%20sell-two%20function%20two%20birdcage%20percolator%2018.8mm%20glass%20bong%20glass%20water%20pipe%20smoking%20pipe%20glass%20bubbler.jpg

http://www.dhgate.com/product/to-sell-two-function-two-birdcage-percolator/212087709.html

Any opinions on these? I was thinking about getting the top two (the bottom one looks really nice as well, but expensive; however, after hearing all these bad comments about kathys pieces, maybe that's the one I SHOULD get ?), then selling the one I don't like- but if the piece really sucks that bad I would definitely like to know so I can save myself the trouble (easier to sell pieces that I also enjoy :shrug:)





or CCG recycler
Free%20Shipping%20New%20Popular%20Design%20Recycled%20Water%20Glass%20water%20pipes%20Glass%20bongs%20Glass%20oil%20rig%20dabbers%20with%2014.5mm%20joint%20glass%20dome%20and%20nail.jpg

http://www.dhgate.com/product/new-popular-design-recycled-water-glass-water/210841650.html


THANKS AGAIN FOR ALL YOUR GUYS HELP!! :)

I would never go for the top 3 because I feel that is way too much diffusion for vapor. I feel like most pieces on dhgate are being used for dabbing, but I'm looking for less diffusion for my vaporizer. I was looking into the CCG recycler because I can't find a classic beaker for a good price and is also 14.5mm. The only thing about the CCG recycler is the inline is facing up instead of down, which I think is the way they are supposed to be facing. Not sure if that will affect function.

There's this recycler: http://www.dhgate.com/store/product/new-recycler-bongs-recycled-glass-water-pipes/212585574.html

But I like the look of the white colored one better. There's a review of it on another thread, but the user used a lot of water. So I don't know how well it would work with less. I think I'm gonna have to go to the dreaded over priced headshops for a classic beaker though.
 
Last edited:
various127,

DieHard

Accessory supplier
Accessory Maker
Well the Mobius G186 got here. It's pretty sick, but there's a flaw. The bottom perc is crooked! It's a little disappointing. I don't know how much it's effecting functionality either. I've been dabbing off of it though and it hits nice. Much more work to clear than the D020.

There's also another weird imperfection on the glass. Almost like a small chip or something? I don't know how to explain it. Anyways I'm thinking about messaging the seller and seeing if they'll do anything about the perc. I'd be okay with a partial refund but for $63 I feel like it's worth bringing up. I had the intentions of trying to flip this piece but I may just keep it.

Also got the E-Nano. All I have is a 14mm gong. I tried to rig it to an 18/18 adapter and it just wasn't working. Need an 18/14 reducer. Did some dry bowls off the stem and it's a bit too harsh for my liking dry.
I think most of them had slightly crooked percs. Also a slightly tilted mouthpiece. Mine has both. Mine also has a tiny sharp glass spike down in the Mouthpiece. You would never know it was there unless you run your finger around inside the MP. IMO it does not affect function.
 
DieHard,
  • Like
Reactions: NickDlow

Dangus

Yeah, well, that's just, like, your opinion, man.
Quick pic, sorry a bit blurry.

DiqmjHo.jpg


Turns out mine came 14mm as advertised and with a 6 slit shower head. Nice rig. I'll work on getting a vid of this and of the fab egg soon...just been damn busy. Haven't even done my morning glass searches lately...
 
Last edited:

Radio

stay true to yourselves
  • Bubbler - DHGate $32
  • Lotus Vapor Cap - $70
  • Lotus Water Adapter - $25
  • Torch lighter - $10
  • 14mm to 18mm adapter - eBay $8
I use the Zico T38 lighter, you can get it on Amazon for about $10. There's lots of other possible lighters to get based on preference.

I honestly believe with this water setup the lotus is really easy to use. As long as you can hold the lighter above the cap while you draw you can use it. With the bubbler it's much easier to see vapor coming from the lotus so it takes much less technique than with the pipe stem.
Thanks dude, I'm going to pitch it too him and see if he thinks its worth spending $150'ish on. I like it a lot!
 
Radio,

Benjaja

Well-Known Member
My Kathy recycler just shipped! But no update frlm planet vape yet about the 18mm gong I ordered the same day. Ruh roh
 
Benjaja,

syrupy

Authorized Buyer
Hey folks there were some posts a ways back about a site http://marijuanapackaging.com/. I purchased a few pieces from them. Well if you are on their mailing list or have ordered from them, consider calling and getting off their mailing list.

Why? Because today in my mailbox they sent me a big fat catalog. On the front, it reads in HUGE TYPE,

MARIJUANA!!!!!

OK, the exclamation marks are mine. But below the lettering was a bright green life size graphic of a pot leaf.

Needless to say, I called them to get removed from their mailing list. The person I talked to said there's been a lot of backlash and it was their bad. Still I told him I don't give second chances for companies that screw up with things like that.
 

EverythingsHazy

Well-Known Member
Well the Mobius G186 got here. It's pretty sick, but there's a flaw. The bottom perc is crooked! It's a little disappointing. I don't know how much it's effecting functionality either. I've been dabbing off of it though and it hits nice. Much more work to clear than the D020.

There's also another weird imperfection on the glass. Almost like a small chip or something? I don't know how to explain it. Anyways I'm thinking about messaging the seller and seeing if they'll do anything about the perc. I'd be okay with a partial refund but for $63 I feel like it's worth bringing up. I had the intentions of trying to flip this piece but I may just keep it.

Also got the E-Nano. All I have is a 14mm gong. I tried to rig it to an 18/18 adapter and it just wasn't working. Need an 18/14 reducer. Did some dry bowls off the stem and it's a bit too harsh for my liking dry.

Who did you get your gb186 from? Also, did it have logo's (if so, roor or mobius)?
 
EverythingsHazy,

vapordab

Medical+FC=Recreational
@flick the top perc on my 186-1 is actually pretty crooked, and I don't think it effects function much at all. And besides, the bottom perc isn't very functional. imo this won't effect function :)

This is one of my very favorites out of the many that I have tried with the nano. Also, I personally think that its too big for an oil rig for my tastes
 
Last edited:

EverythingsHazy

Well-Known Member
@flick the top perc on my 186-1 is actually pretty crooked, and I don't think it effects function much at all. And besides, the bottom perc isn't very functional. imo this won't effect function :)

This is one of my very favorites out of the many that I have tried with the nano. Also, I personally think that its too big for an oil rig for my tastes

Same questions for you lol.
Who did you get your gb186 from? Also, did it have logo's (if so, roor or mobius)?
 
EverythingsHazy,

MGG

Well-Known Member
So stevenlmz79 never sent me tracking id for my replacement.. Tomorrow i'll be filing a dispute.
As far as i'm aware he hasn't refunded or replaced anyones?
 

BoogerMan

Well-Known Member
So stevenlmz79 never sent me tracking id for my replacement.. Tomorrow i'll be filing a dispute.
As far as i'm aware he hasn't refunded or replaced anyones?

I messaged Steven today and he informed me he was going to put up a random tracking number for my replacement order. He said he had to put that since my replacement order was supposed to ship out today but the new batch isn't ready yet. He said the new batch is being created now and it will be of much better quality. He knows about fuckcombustion and he is trying to produce good quality items so he can become one of our trusted sellers like Sunshine store and Kathy and Yingmin.

I'm okay with giving him another chance because of a few reasons. Kathy started out not so great either, but she is now one of the best sellers. Also if his items are close to perfect quality I don't mind the wait.

My Kathy barrel to funnel already departed China a few days ago so I should have it by the weekend :)
 

MGG

Well-Known Member
I messaged Steven today and he informed me he was going to put up a random tracking number for my replacement order. He said he had to put that since my replacement order was supposed to ship out today but the new batch isn't ready yet. He said the new batch is being created now and it will be of much better quality. He knows about fuckcombustion and he is trying to produce good quality items so he can become one of our trusted sellers like Sunshine store and Kathy and Yingmin.

I'm okay with giving him another chance because of a few reasons. Kathy started out not so great either, but she is now one of the best sellers. Also if his items are close to perfect quality I don't mind the wait.

My Kathy barrel to funnel already departed China a few days ago so I should have it by the weekend :)

K but this guy told me he made his 'good batch' on the 20th of october
"last lots have some cracks on prec that I send out 1t 16th.Oct.your products were send at 20th.OCt.which already be checked by my QCs."
 

OvaDaBong

Member
popped on this last night, simple, thick as hell 7mm! will have a better chance of arriving in one piece, 18mm gong so my pvhe glass bit for my solo is a straight fit, 18mm means i can also use my spare elbow from my extreme q to link it and got a dome less nail as well just to play with if i ever end up with much keif/hash from my grinder :p plus the seller had a video of it and it looks like its a good size and will do the job



hand-blown-glass-bong-glass-bubbler-18-8mm.jpg

http://www.dhgate.com/product/hand-...ubbler-18-8mm/205435136.html#cart_view-1-null


the cheapest dome-less nail DHgate had to offer
1.0x0.jpg

http://www.dhgate.com/product/t-003...l-for-both-14/198917422.html#cart_view-3-null
 
OvaDaBong,
  • Like
Reactions: grokit

Frederick McGuire

Aggressively Loungey
Got my dabuccino rig in from Steven today - as others feared, the mouthpiece is just way too close to the inlet joint, and way too short.

It is literally unusable - my mouth can't reach the mouthpiece because my nose gets jammed up against the dome...

I sent Steven a message on dhgate letting him know I was very unimpressed with what I received
Well, I received my item today.

I am quite disappointed how close the mouthpiece is to the inlet joint - I literally cannot get my mouth to touch the mouthpiece as my nose is pressed up against the dome...

Why would you put the mouthpiece so close to the inlet?
How Do you actually expect anyone To use this item?

I am very disappointed as I cannot use the item, and I will be unable to sell it with such an unusable design.

At this point I feel I have entirely wasted my money on this order.

He responded and is apparently shipping me out a replacement

Hi,you are my friend,if you are not like any points for my products,no problem,I can resend you improved items,friend.

So that I must do it,you will recieve news in next week.

Steven

So... I shall begin the waiting game :lol:

(I'm still digging my other rigs I got from him - the dabuccino is the first item from him I've had issues with.)
 
Got my dabuccino rig in from Steven today - as others feared, the mouthpiece is just way too close to the inlet joint, and way too short.

It is literally unusable - my mouth can't reach the mouthpiece because my nose gets jammed up against the dome...

I sent Steven a message on dhgate letting him know I was very unimpressed with what I received


He responded and is apparently shipping me out a replacement



So... I shall begin the waiting game :lol:

(I'm still digging my other rigs I got from him - the dabuccino is the first item from him I've had issues with.)
Well Frederick, since you are his friend ... :lol::lol::lol:
 
Top Bottom