Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
weenstoned
Well-Known Member
CCG posted a function video, I can't really tell if it is working properly or even has a ball.
pigfoot
Dabs are vapor too!
Interesting. Function video looks good, although water level maybe a trifle high. CCG's pictures seem to show a ball...... The SSS photos clearly show one.
Last edited:
SavageCore
Well-Known Member
It looks pretty cool, might finally try the 710 if this SSS version works good
I just looked closely to the CCG's enlarged pictures, and it shows a hole thru the bottom end of the stem, kind of like a single swiss perc hole?
http://www.dhgate.com/product/fc-ra...s-with/372073962.html#s1-0-1b;searl|992195186
pigfoot
Dabs are vapor too!
I know what you mean. I think there's actually a ball in there, almost looks like it's stuck to the side with a bit of water. I guess we won't know unless someone emails them, or receives one.
wildything
Well-Known Member
I messaged them(ccg) asking if there is a glass ball in the perc, still wating on a reply though.
Last edited:
CameraNerd
Well-Known Member
I got a hyman quartz 4mm thick banger 14mm male in the mail today. totally bad ass.. totally worth it. Will reorder. Hint: if you order from your phone, there is inventory sometimes not avail through the desktop. interesting.
If you are using titanium to dab with, you should really test out one of these hyman bangers. $12.50 delivered is magical.
I think i would get a 3mm thick banger, as the vector torch cant make it glow (for better or worse)
If you are using titanium to dab with, you should really test out one of these hyman bangers. $12.50 delivered is magical.
I think i would get a 3mm thick banger, as the vector torch cant make it glow (for better or worse)
weenstoned
Well-Known Member
Ya I prefer the 3mm, I think 4mm is a bit overkill and also often just the sides are 4mm while the base is thinner and that's the part you want to be thick.
galacticdad
Well-Known Member
vicious916
Dab Connoisseur
I messaged ccg about this earlier as I didnt see a ball either and he messaged me back saying it doesn't have a ball what a shame since it's the only 14mm rattle can and that ball is vital for the function of the diffusion pump looks like ill be ordering stevenz version which I know for sure has a ball
Last edited:
pigfoot
Dabs are vapor too!
I got a hyman quartz 4mm thick banger 14mm male in the mail today. totally bad ass.. totally worth it. Will reorder. Hint: if you order from your phone, there is inventory sometimes not avail through the desktop. interesting.
If you are using titanium to dab with, you should really test out one of these hyman bangers. $12.50 delivered is magical.
I think i would get a 3mm thick banger, as the vector torch cant make it glow (for better or worse)
This seller has a clone of HE's new hybrid nail, I've got one on order.
I got a 3mm banger from him, it's quite good. Hold plenty of heat. I use a timer app on my phone to make sure the temps are consistent.
Maybe they'll figure out they need to put the ball in there!
Maybe they'll figure out they need to put the ball in there!
They weren't able to figure out how to trap the ball during construction without completely sealing the bottom of the perc. That would make the ball pointless, so the ball was omitted, and the perc was left open.
There's a video on YouTube of a prototype diffusion pump and it has no check ball. So while the ball may improve function, it isn't absolutely necessary.
If enough people message it might motivate them to figure out how to build them with the ball in place. In the meantime, I'm glad Steven nailed this design.
While we're mentioning dhgate nails, I used the HQ bangers with both torch and coil for a long time, with great results. Recently I've been using the coil exclusively, so I purchased a HQ domeless quartz enail. It works really well- I find it performs far better than the banger does with a coil, and there's no risk of the coil falling off.
Last edited:
weenstoned
Well-Known Member
I also switched from their coil bangers to the enail after i was using it naked and the coil fell onto my leg inches from my dick.
Loving the quartz hybrid copy now though. I like the HQ enail but the airflow is a lot more restricted which I think makes me cough a lot more. The extra airflow of the quartz hybrid also gets my CCG torus functioning a lot more compared the the HQ enail.
Loving the quartz hybrid copy now though. I like the HQ enail but the airflow is a lot more restricted which I think makes me cough a lot more. The extra airflow of the quartz hybrid also gets my CCG torus functioning a lot more compared the the HQ enail.
SSVUN~YAH
You Must Unlearn, What You Have Learned...
Were you frying bacon too? Here's some advice, if you're worried you might burn your tally whacker, put on some clothes! Nice touch with the PIR horn though.
galacticdad
Well-Known Member
which copy is that? ive got a couple of his nails now and i'm loving them but wish they had a bit more airflow
weenstoned
Well-Known Member
http://www.dhgate.com/store/product/2016-dualiti-ti-qtz-titanium-quartz-hybrid/270582512.html
It's for a flat coil e-nail mostly. If you are just using a torch I would say stick with a banger as the airflow is not much more than that. If you have a flat coil I have to say buyer beware as there is variation in quartz dish size which could cause the coil not to fit.
The retaining nut from that nail fit on an old infiniti copy I had so I have been using that as a base as it should keep the joint cleaner due to being direct inject. I would recommend ordering it as well to make sure your coil fits as you can adjust the dish supporting the flat coil. Reasonably sure this is the same nail but I got mine through Auber over a year ago so the threading could be different (I doubt it but might as well warn you anyways). http://www.dhgate.com/product/wholesale-universal-domeless-titanium-nail/240912559.html
One other slight con is the dish has a decent diameter so a lot of carb caps don't fit great.
Or if you want slightly better quality control and USA titanium and are willing to pay a bit more check out New Vape's quartz hybrid nail. Pretty sure they have the quartz made in China and do the titanium themselves. Depending on how you configure it it starts at about 70 bucks. http://www.newvape.com/hybrid-quartz-nail/
If you are using a torch I would also recommend one of these knock-off grails as they can be easily capped with a marble or anything flat and glass. The slit also makes for excellent airflow. This seller only seems to have female jointed ones, but if you search quartz grail on dhgate other sellers have male ones. Just make sure you pick the right kind as the hyman grails don't look nearly as nice. http://www.dhgate.com/store/product/2016-new-female-domeless-quartz-banger-nail/270484747.html
b0
Cloudy...
Be careful with that seller, ordered 14th of January and he gave me 2 fake tracking numbers so far and neither of them is working.
Between that and the not working nut on @weenstoned nail, I won't recommend him.
Cannabis Connoisseur
I LOVE LIFE
Mangos
Well-Known Member
Hey guys, got my FC mouthpiece and FC mod from Steven-took six days to get here to the UK. First the FC mouthpiece is great no leaking and it fits fine on top of the Evo.
The FC mod might be my favorite piece from Dhgate. So versatile- really is nice being able to change from more or less diffusion. Wouldn't have found these pieces without you guys so thanks for the that.
The FC mod might be my favorite piece from Dhgate. So versatile- really is nice being able to change from more or less diffusion. Wouldn't have found these pieces without you guys so thanks for the that.
b0
Cloudy...
Chinese new year starts in February and I ordered the 14th of January. In fact I ordered more things from other 2 sellers and everything is already in my country. We should stop using Chinese new year as an excuse for shady/lazy sellers. Because they use it doesn't mean it's true.
Edit: In fact I ordered a new quartz banger-cap set from another seller this Wednesday and just found that I have a working tracking number.
Last edited:
pigfoot
Dabs are vapor too!
Cool to know it may fit the infiniti copies! Those grails look nice, here's another seller. It looks like this is a 1:1 clone of HE's hybrid, they say their caps will fit. Did you try any HE cap/clones? Here's a clone of HE's particap that should work.
I've ordered from him, it did sit in the PO facility for a few days (said "origin post preparing shipment") but is scheduled to be delivered on time. Did @weenstoned mention the nut doesn't work?
I don't believe celebration (or delays) have started yet. Isn't Feb 8th the first day?
"Starting February 14, 2015 until February 24, 2015 , China will be celebrating its Spring Festival.
Shipping companies, factories, sellers and some of DHgate staff members will be on holiday. Orders placed during this period may be delayed for a few days."
Please be careful to post correct information.
weenstoned
Well-Known Member
@b0 mine was shipped out basically the next day and I got it in 10 days to Canada so my shipping experience does not jive with yours. Also the nut was fine just one dish is too big but having the Infiniti copy makes that a non-issue.
@pigfoot I already messaged the seller about the particap copy and apparently it won't fit. Thanks though. Seems like either the dish or the cap is not a 1 to 1 copy. Maybe both.
@pigfoot I already messaged the seller about the particap copy and apparently it won't fit. Thanks though. Seems like either the dish or the cap is not a 1 to 1 copy. Maybe both.
pigfoot
Dabs are vapor too!
Ah. Interesting. What are you using to cap the hybrid nail? I'll have that nail and the particap later this week, I'll be able to test it then
Last edited:
mundzz
Member
I am intrested in buying the D020-D as everyone says its really good for the price. I was hoping someone would direct me to a good nail to buy it. As I am enteirly new to the glass/nail/concnetrates equipment world.
I tried googling 'D020-D ti nails' or 'titanium nails for D020-D' it hasnt been fruitful so far.
here is the link for reference
I tried googling 'D020-D ti nails' or 'titanium nails for D020-D' it hasnt been fruitful so far.
here is the link for reference
Last edited: