Cheap High Quality Bubbler

so Pinnacle water tool knockoff owners: I just received mine from SSS today (a 710 miracle! Took 5 days from order!). My question is, should the water not drain out of the top chamber fully? I had assumed that was the purpose of the slits was to provide a shield from the water, and let it drain back down. I have water about 1/2 way up those slits, and it doesn't drain down. The hell? Is be correct? I can't get a hit that's drink-free...
You don't want it to drain. It would ruin the vapes it was designed for
 
Cannabis Connoisseur,
  • Like
Reactions: SSVUN~YAH

Herr_Dampf

Well-Known Member
so Pinnacle water tool knockoff owners: I just received mine from SSS today (a 710 miracle! Took 5 days from order!). My question is, should the water not drain out of the top chamber fully? I had assumed that was the purpose of the slits was to provide a shield from the water, and let it drain back down. I have water about 1/2 way up those slits, and it doesn't drain down. The hell? Is be correct? I can't get a hit that's drink-free...

Same issue I had with 2 of those. Got a nectar collector knock off, much better function. The spillproof feature is nice as well.

http://www.dhgate.com/product/honey-straw-concentrate-honey-dab-straw-nectar/211437768.html

Don't have that one but it looks nice as well, would go well with my new Storm :)
http://www.dhgate.com/store/product/new-mini-honey-straw-kit-nectar-collector/237352777.html
 
Herr_Dampf,
  • Like
Reactions: SSVUN~YAH

Delta3DStudios

Well-Known Member
Accessory Maker
from the top chamber? Wish I'd known it was designed to give me a drink every time I hit it...

I have an older generation PNWT knockoff with half as many slits in the top section (aka the splashguard)

The problem I think you're having is the water isn't draining into the main chamber. I have that issue with my PNWT - to fix this I tilt my PNWT sideways when adding water, and I only add a few mL of water at a time, letting it properly drain into the main chamber.

Be careful not to overfill your PNWT, water can dribble out the bottom and into the vaporizer if you're not careful!
 
Delta3DStudios,

Herr_Dampf

Well-Known Member
Herr_Dampf,
Be careful not to overfill your PNWT, water can dribble out the bottom and into the vaporizer if you're not careful!
now that, I actually expected. I'll see if tipping and going slow helps, but the slits look a bit elevated from the joint (just a few mm, but enough to allow a bit to pool, and increase the surface tension so it won't just leak back down). I'm calling it a top chamber, because shile it functions as a splash guard, it fills up, and then acts as a perc, but doesn't drain well.

Edit: No matter how slow I fill, there's always a drink waiting for me in there. Sigh.

@Herr_Dampf That mini nectar collector looks like an "aqua bubbler" globe attachment that they put a GonG join on at the bottom. Not a complaint, I love my aqua bubbler, and I had been thinking of trying one with the new indents (presumably to deflect some water, since the first gen the water splashes right up the side to the mp).
 
Last edited:
ragnorokk,

fernand

Well-Known Member
Happy 710 everyone, let's all have a great day today and honor the plant and the plants extracts the we all know and love.:bigleaf:


I wondered if anyone has experience with vendor Longer Glass Dong, I mean bong lol http://www.dhgate.com/store/20012409#st-navigation-storehome
Some interesting pieces not seen at most stores. Not sure if the vendor is quality or not though. Anyone have any input?
Frankly he displays so many ugly, irrational and badly made pieces I would never order from this one.
 
Don't fill the water past the slits to high.
I had tried not to go much above them, due to previous bubbler attachment experience. It appears the issue is that without drag, I suck everything up. With enough drag introduced, I have an OK experience. I will spend some time with the unit today and decide whether it is garbage or not. Thanks for the tips, guise!
Now, that nectar collector @Herr_Dampf suggested looks nice, but do I want it or an FC-710...
 
ragnorokk,

Delta3DStudios

Well-Known Member
Accessory Maker
now that, I actually expected. I'll see if tipping and going slow helps, but the slits look a bit elevated from the joint (just a few mm, but enough to allow a bit to pool, and increase the surface tension so it won't just leak back down). I'm calling it a top chamber, because shile it functions as a splash guard, it fills up, and then acts as a perc, but doesn't drain well.

Edit: No matter how slow I fill, there's always a drink waiting for me in there. Sigh.

I gotcha, yeah that happens with one of my two PNWT's - I usually just tilt it over and dump out the 2 or 3mL of excess water stuck in the top chamber before I use it :lol:

The PNWT is small and fun as a portable bubbler for road trips, but it's not my everyday bubbler so I don't care too much
 
I figured I'd do that, but even if I plug the bottom, tipping it enough to empty the top part causes the actual perc chamber to spill into the top/splash guard area. Oh well.
 
Last edited:

ataxian

PALE BLUE DOT
I gotcha, yeah that happens with one of my two PNWT's - I usually just tilt it over and dump out the 2 or 3mL of excess water stuck in the top chamber before I use it :lol:

The PNWT is small and fun as a portable bubbler for road trips, but it's not my everyday bubbler so I don't care too much
The PNWT never impressed me?
I just ordered the FC UFO!
The inter changeable mouthpiece was the point I found interesting!
 

cybrguy

Putin is a War Criminal
I just ordered the FC UFO!
The inter changeable mouthpiece was the point I found interesting!
That was an interesting concept, but I had hoped that Steven would offer some choices on mouthpieces. The only decent ones I have found so far cost 2/3s as much as the whole UFO piece. Best I have seen so far are from OGB.
If anyone has seen anything decent from China, please link...

Edit: Yeah, OK, half as much. But still...
 
Last edited:

East808

New Member
Message steven, and just be clear that the item is defective to the point that it is not usable.

I'd want a full refund, or replacement for an issue like that...
Thanks bro! They said they're gonna send me a replacement.
Also the fc-710 showed up today! 7/10! So I'm on fkin cloud 9. Happy 710 everyone!
Edit: forgot to mention it was a 710 miracle. Got here 4 days after started to track. Think 6 days from ordering.
 
Last edited:

ataxian

PALE BLUE DOT
That was an interesting concept, but I had hoped that Steven would offer some choices on mouthpieces. The only decent ones I have found so far cost 2/3s as much as the whole UFO piece. Best I have seen so far are from OGB.
If anyone has seen anything decent from China, please link...

Edit: Yeah, OK, half as much. But still...
I use a lot of DELTA 9 stuff. (W9TECH)
The BENDER mouthpiece is amazing!

For the UFO I will use the BENDER mouthpiece!
 

Frederick McGuire

Aggressively Loungey
Steve put out the Matrix Clear bubbler but it's too small. Its the same size as the Ion. The Clear is supposed to be 11.8" -12" the mouthpiece. That's just a different shape off the same thing he already has. He could've at least went with the Reti perc.
Did anyone specifically ask steven for the clear that we know of? Or is he just trying to knock off other popular möbius rigs given how well they sell?

I've got 2 möbius clears, so I could get him pics and measurements pretty easily...

Honestly I'd rather just see a clear sized ion.
Keeps it distinct from an existing model (which I know not all, or even most of our FC rigs are at the moment, but it's something I think we should aim for...), and I think the big base of the ion design would kick ass on a piece as big as the clear :brow:
 
Did anyone specifically ask steven for the clear that we know of? Or is he just trying to knock off other popular möbius rigs given how well they sell?

I've got 2 möbius clears, so I could get him pics and measurements pretty easily...

Honestly I'd rather just see a clear sized ion.
Keeps it distinct from an existing model (which I know not all, or even most of our FC rigs are at the moment, but it's something I think we should aim for...), and I think the big base of the ion design would kick ass on a piece as big as the clear :brow:

Sold!! Giant Matrix FC-186!!
 
Cannabis Connoisseur,
  • Like
Reactions: ataxian
Frankly he displays so many ugly, irrational and badly made pieces I would never order from this one.

You are right there totally inconsistent and janky looking ones. I see a couple things they may have been interesting since I have not seen them from the normal vendors spoke of here, I wondered if anyone took the risk yet. Appreciate the input.
 
ConstanlyConcentrated,

twentypast4

#nycdabber
I noticed Kathy0577 carrying EZwider papers now, are these Chinese replicas too? Lol

Also, @Frederick McGuire I would like to hear a review on that donut beaker from Steven as well, as it caught my eye too. Enjoy!
 
twentypast4,
  • Like
Reactions: jds32
Top Bottom