Cheap High Quality Bubbler

kazz

Little Lebowski Urban Achiever
Anyone have problems with dhgate processing their credit card? I'm getting a message saying they can't verify and to please contact my bank or use another card. I know it's not an issue with my card.

Yes, it happens to me every time. I just call the number on back of the card to approve the purchase. A couple of times they have stayed on the phone with me while I purchase and they approve the transaction w/ no problems at all.
 
kazz,

Deano

Well-Known Member
It's a reloadable prepaid card that I use specifically for online purchases since having my personal banking info compromised two years ago.

I used the same type card for my d20 purchase just 2 months ago without any issues so I'm not sure what's going on.

Wish they accepted PayPal.
 
Deano,
  • Like
Reactions: Morty

Delta3DStudios

Well-Known Member
Accessory Maker
Something around the same size, except with a detachable stem like the FC-UFO, would be PERFECT for me...
Any suggestion from the glass oracles?
The FC-UFO is unique - it's hard to find pieces with a detachable mouthpiece on DHgate. Good luck.

Anyone have problems with dhgate processing their credit card? I'm getting a message saying they can't verify and to please contact my bank or use another card. I know it's not an issue with my card.
Aside from the strange processing system for handling credit cards (Which takes multiple tries sometimes), I *was* able to use my credit card several times to buy stuff (about 5 transactions over 3 months no problems). Then one day it just stopped working. Few days later my bank called me to say they had blocked several DHgate transactions - I told them it was me.

Wish they accepted PayPal.

Yeah that'll never happen - paypal's policies are far too strict for DHgate. However there is an alternative called Skrill.com which is accepted by DHgate. These days, that's all I use to make purchases on DHgate. Much safer and easier than using a credit card
 

GnomeGrownGreen

New Member
Hey everybody I'm brand new to the site but I bought a recycler from Kathy on June 29 and I accidentally approved payment because I was on my phone shit messed up anyways I'm kind of nervous and hopes it actually comes and was wondering if anyone had used this certain piece before
rBVaGFU-SAyABd4vAAJpQSOIRW8619.jpg
 

Deano

Well-Known Member
Finally got it to work. Apparently these prepaid cards have to be registered before one can make online purchases. Everything should be golden now.

Ordered both of these. Now the wait begins!

1.0x0.jpg
rBVaGFTDAeOALCKMAASeuWAGiVQ123.jpg
 
Last edited:

GnomeGrownGreen

New Member
Woah that piece looks awesome! I've also been thinking of getting a ashcatcher, are there any that are must haves for anyone?
 
GnomeGrownGreen,

Deano

Well-Known Member
Woah that piece looks awesome! I've also been thinking of getting a ashcatcher, are there any that are must haves for anyone?
I got the ash catcher because I'm wanting to keep my bubbler clean when using flower.

I specifically sought out something smaller that wouldn't tip it over.
 
Deano,

Delta3DStudios

Well-Known Member
Accessory Maker
Woah that piece looks awesome! I've also been thinking of getting a ashcatcher, are there any that are must haves for anyone?

This is my favorite 18mm AC. Almost paid $99 for one on Ioffer when CCG uploaded it to their store. Nice solid thick glass, build quality was superb - one of the best on DHgate I've seen so far. Although the inline perc is the only one with action - the other two honeycombs act as splashguards

http://www.dhgate.com/product/glass-ash-catcher-ashcatcher-with-18-8mm/229602829.html
glass-ash-catcher-ashcatcher-with-18-8mm.jpg


Still on the lookout for a sweet 14mm Ashcatcher
 

Deano

Well-Known Member
Ratchett,
Your post about yings toro gb-194 is what helped make my decision to go with him over Steven. While Steven makes quality pieces, you stated the design of yings tree perc being closed was far superior and makes it less/non chuggy.

Thanks for your help, man!
 

GnomeGrownGreen

New Member
Ratchett that looks like a good one I've had an inline perk and it was a pain to clean when it got dirty. How easy is it to clean especially with the 2 honeycombs sealing the one end. I also saw a few people suggest a few drops of cranberry extract to help with keeping the pieces clean.

Deano, that is exactly what I'm looking for, for both reasons. Do you think the tilt will be OK I was wondering that, it looks really easy to clean and maintain.
 
GnomeGrownGreen,
  • Like
Reactions: Deano

Deano

Well-Known Member
Ratchett that looks like a good one I've had an inline perk and it was a pain to clean when it got dirty. How easy is it to clean especially with the 2 honeycombs sealing the one end. I also saw a few people suggest a few drops of cranberry extract to help with keeping the pieces clean.

Deano, that is exactly what I'm looking for, for both reasons. Do you think the tilt will be OK I was wondering that, it looks really easy to clean and maintain.
The reviews I read on other ash catchers were very positive but many stated they can be quite heavy and when paired with a smaller bubbler, if the base isn't weighted and balanced properly, it could tip.

This is mainly why I chose the setup I did. Something with a female joint and a lightweight ash catcher to keep things clean without tipping her over.
 
Deano,

Lopo

Member
Hey guys!
I really like the look of stevens new dropdown beaker. Do you think a lotus would fit there? It looks like it might be too close?
 
Lopo,

GnomeGrownGreen

New Member
Thats what exactly my concerns with heavy ashcatchers is a friend or someone could be over and bump or tip it and break it. I will definitely be looking forward to buying that soon, here's hoping I get my piece from Kathy.
 
GnomeGrownGreen,

Delta3DStudios

Well-Known Member
Accessory Maker
Ratchett that looks like a good one I've had an inline perk and it was a pain to clean when it got dirty. How easy is it to clean especially with the 2 honeycombs sealing the one end. I also saw a few people suggest a few drops of cranberry extract to help with keeping the pieces clean.

Deano, that is exactly what I'm looking for, for both reasons. Do you think the tilt will be OK I was wondering that, it looks really easy to clean and maintain.

Cleaning isn't an issue since I do use Cranberry extract at all times. And when it gets real dirty I do a few PBW soaks. Worst I've had so far was some mold buildup from not draining the water properly after cleaning. Had to do 4-5 PBW rinses to get it clean again
 

alltoreup

Damn you, party liquor
My replacement FC-1000 arrived today. This one is nice. The matrix perc is a bit lower in this one than the other which I take as a plus since the other only had a tiny amount of room before the pillars start. There is one spot on a pillar that I at first thought was a crack but after washing it out seems to just be a thicker ridge of glass. Almost like a sliver of glass got melted to the outside. It's super hard to see. Other than that it seems to be excellent quality. Even the inside of the mouthpiece is smoother. The old one was kinda sharp-ish.
It arrived about 10 days after I got tracking. Definitely my fastest Steven piece.
 
alltoreup,
  • Like
Reactions: Zufi Raj

GnomeGrownGreen

New Member
Cleaning isn't an issue since I do use Cranberry extract at all times. And when it gets real dirty I do a few PBW soaks. Worst I've had so far was some mold buildup from not draining the water properly after cleaning. Had to do 4-5 PBW rinses to get it clean again

What kind of cranberry extract do you use Ratchett? Would you recommend store bought from HEB or Kroger? And also what is PBW? Sorry for the noob question lol.

mod note: You've already asked this question in another thread. No cross posting please.
 
GnomeGrownGreen,
  • Like
Reactions: Been Vapin

wildything

Well-Known Member
Cleaning isn't an issue since I do use Cranberry extract at all times. And when it gets real dirty I do a few PBW soaks. Worst I've had so far was some mold buildup from not draining the water properly after cleaning. Had to do 4-5 PBW rinses to get it clean again
I'M really interested in finding this PBW. What does it stand for and where do u guys get it? I know everyone is using it but I just can't find it haha
 
wildything,
  • Like
Reactions: SSVUN~YAH

fernand

Well-Known Member
@fernand that water tool looks sturdy. what is it?

It's either a little 14cm wasserapparat. Or a 6 inch waterbongito. I got mine at CBCB in Berkeley CA. FortyFive less 15 percent for good behavior, plus tax for laughs. A very similar device appears on Amazon here. It may or may not be from the very same Chinese factory.

It's not all that discreet/stealthy, but it's rugged, it's versatile, it's stable, and I like it. IMHO it's a good hobby anyone can grow into. Most of its shortcomings can be remedied with the usual adapters. My Solo Gong can't fit until I get a 10 to 14 mm adapter without the big bulge. And I'm still looking for a 10mm Ti nail at an acceptable price, thirty bucks is a lot.

The Plumeveil RDA is good with erl, EJmix or whatever, given the right coils and wicks.

20150704_155827LF_zps6u6eaplj.jpg



The $25 pre-filled Sapphire carts have gotten a lot better and tastier lately in Medical California. They can deliver a good hit or two upside down off a 150 mAh battery before tipping to re-load the wick. Bubbly yum.


20150702_125727LF2_zpsme0wcydf.jpg
 
Last edited:

jds32

Well-Known Member
Just got my Straight Fab yesterday. Was super happy till I found a huge hole next to the weld of the perc. (See pic )
It makes it so the back 3-5 perc slits don't fire on a slow pull.
What makes it even worse is, I ordered a fc710 that shipped already. Idk what to do about this. What would you guys do?

Edit sorry fixed pic

f3hkht.jpg

Sorry to hear about your defective piece. I always try to order one piece per vendor at a time so that I can restrain some kind of leverage - a future purchase! I'm waiting on my straight fab right now so I can order that new beaker.
 
jds32,

chainz

Well-Known Member
do you sell your straight fab under another store? or has it been stolen ?
http://www.dhgate.com/product/mothe...ew-height-27/245974622.html#s1-1-1a|174000007

also im interested in your starbuck cup can you tell me more about it? isthere a small version and any options to know of?

stevenlmz79 2015-07-07 15:40

My friend,
it is a so not goos buyer...he copy my products....


I already made dispute to dhgate.thanks for yoiur information..also these products only my factory can produce..

starbuck only have 14.4mm.not other sze..

Jane/Steven

Good ol' Steve-O
 

NickDlow

Log Hog
stevenlmz79 2015-07-07 15:40



Good ol' Steve-O

Lol I just checked the link and idk if a pic of the straight fab was up but it's a pic of a fab egg now.

Knock offs of knock offs, gotta love it lol.

"European and American popular glass hookah smoker"
:rofl::lmao::lmao::rofl:

Reminds me off the guy's sign off from ccg in his videos, "this piece is 'hirighy' reccomened". I gotta meet the guy who makes those recommendations and slap him!:lmao:
 
Top Bottom