Cheap High Quality Bubbler

howie105

howie105

Well-Known Member
vinnyzan said:
Whining ?
Feel free to put me on ignore if my whining bothers you. I thought people are supposed to be nice around here ? Did I really do somthing wrong in this thread...

All I was saying is there no reason to sit around and do nothing while my order goes to the wrong state...
Click to expand...

Except it won't do any good. As been pointed out the vendor in China can't do anything about shipments beyond their points of control. As to shipping problems in the states I would suggest dealing with and seeking any clarification from the state side carrier here as well owing to the fact that the folks in China are too far removed from your current concerns.
 
VAPEHUNTER

VAPEHUNTER

Well-Known Member
nihil

nihil

Member, Known Well
@mutten840 I ordered that piece last summer for $30 USD from Sunshine Store's front on Aliexpress, I think it's sold as a D020-Q.

Yes it does vortex nice, no it is not a good one to use for vaping. It's more of a novelty piece that I use every few months for combusting with friends. It is epic though.. loud and you have to pull pretty hard to get it started. Massive hits as well, but again, as a combustion piece.
 
Last edited:
619TangerineOG

619TangerineOG

Member
I recieved my CCG eggs today. Overall they are pretty cool. I wasnt much into the kathy eggs look, these are a little better. The rip pretty nicely, mine all have 6 holes in the percs. I do have a few complaints. First was none of the female GonG are actually level. The one in the first picture on the left is most level and the right the most angled. Second, I ordered mine with ceramic nails, which are total jank and wont fit in any female GonG I have and have some weird shiny crap in their dish. Ill post a picture of it. And third is there is some red colored tooling mark on 2 of the 3 percs that I cant get off, I have only tried rubbing alcohol and hot water so far. Ill post a picture of that.
Great for the price, but theres alot of room for improvement. Also one is slightly taller than the other 2.
i
11124794_10203961426222084_157605199_n.jpg


11178426_10203961425222059_1675422553_n.jpg



Heres a picture of the ceramic nail not fitting.
11168970_10203961425742072_840828657_n.jpg
 
5

507E

Well-Known Member
Master_Bator said:
has anyone contacted CCG and recommended that they change the perc? they would probably do it. i want one, but i was minimal restriction and pinholes would get clogged up way too fast
Click to expand...

Thanks for your message. Don't worry about it, we will fix this perk design. Your item will have the better functioning perk. For more questions, pls feel free to contact us. We are always at your services.

This is the reply I recieved today when I asked about my egg .
 
beastcoast

beastcoast

Well-Known Member
507E said:
Thanks for your message. Don't worry about it, we will fix this perk design. Your item will have the better functioning perk. For more questions, pls feel free to contact us. We are always at your services.

This is the reply I recieved today when I asked about my egg .
Click to expand...

I thought cleanclearglass got an account on FC and posted that message for a sec lol!! Welcome.
 
BoogerMan

BoogerMan

Well-Known Member
Hey everyone!

I know DHgate has some cheap Quartz bangersqnd buckets, but if you don't want to wait for shipping and you still want a cheap source, check out

www.thequartzcove.com

The site is owned and operated by our very own @Erwin! Thanks man :tup:



They have the 4mm thick atomic bangers for only $50! If you guys remember, CFAB was charging $100 for the same exact item!

http://thequartzcove.com/collections/all-products/products/4mm-thick-atomic-banger-nail

Anyways check out The Quartz Cove if your in the market for a new nail or bucket!

278C0398-1B0C-451F-96A0-BD3EBAF387C6_zpshmcszwar.jpg
 
Last edited by a moderator:
mrgohamilton

mrgohamilton

Well-Known Member
well heres my fab egg video, i have found nothing wrong with it. function is perfect. maybe having shower head slits instead of pinholes would allow better air flow but the drag isn't bad AT ALL

that scratching sound is from the ripples on the glass its sitting on in the beginning of the video. the bottom of the fab egg is completely smooth and solid



sorry i don't have a tripod for my canon t3

edit: this is the ceramic combo it comes with (female domeless and carb cap)

the domeless seemed to crackle on heating so i put it away lol.
 
Last edited:
NickDlow

NickDlow

Log Hog
BoogerMan said:
Hey everyone!

I know DHgate has some cheap Quartz bangersqnd buckets, but if you don't want to wait for shipping and you still want a cheap source, check out

www.thequartzcove.com

The site is owned and operated by our very own @Erwin! Thanks man :tup:

Make sure to use the coupon FuckCombustion for 20% off!

They have the 4mm thick atomic bangers for only $50! If you guys remember, CFAB was charging $100 for the same exact item!

http://thequartzcove.com/collections/all-products/products/4mm-thick-atomic-banger-nail

Anyways check out The Quartz Cove if your in the market for a new nail or bucket!

278C0398-1B0C-451F-96A0-BD3EBAF387C6_zpshmcszwar.jpg
Click to expand...

Is it still China Quartz or is it sourced from the USA?
 
cybrguy

cybrguy

Putin is a War Criminal
What do the CCG eggs do to flavor? It doesn't seem like as much diffusion as other pieces. I would think it might be like a recycler with a simple perc.
 
cybrguy,
mrgohamilton

mrgohamilton

Well-Known Member
cybrguy said:
What do the CCG eggs do to flavor? It doesn't seem like as much diffusion as other pieces. I would think it might be like a recycler with a simple perc.
Click to expand...

no complaints about flavor from me.


By no means is this thing small. I was surprised at how big this thing actually was when i pulled it out the bubblewrap
 
mrgohamilton,
BoogerMan

BoogerMan

Well-Known Member
NickDlow said:
Is it still China Quartz or is it sourced from the USA?
Click to expand...
I believe it is all from China (Hyman is the source IIRC?) just at a much more reasonable markup. About half the price of most of CFABs stuff.

mrgohamilton said:
well heres my fab egg video, i have found nothing wrong with it. function is perfect. maybe having shower head slits instead of pinholes would allow better air flow but the drag isn't bad AT ALL

Click to expand...

Nice vid!

I have noticed that I like the egg the most with my more restrictive vapes and nails. You don't notice the drag as much from the perc because of the restriction from the vape or nail, especially if using a carb cap.

I sure hope they release a new egg with a better perc with bigger holes. I cleaned mine tonight and all 6 pin holes were coated with reclaim. I've only used it 5 times :\
 
Last edited:
619TangerineOG

619TangerineOG

Member
Damn out of all 3 of my eggs none of the ceramic nails they sent me fit in the glas on glass fitting. Looks like they sent you one that fit fine mrgohamilton. And update on mine, one of the 3 eggs has a pinhole leak. Heres a video of it

Im going to ask for a replacement. I knew this one hit funny but it took me a while to figure out why.


Also heres that picture of the red stuff in the perc holes. its only on the 2 fully functioning eggs. Not the one in the video. I wish I would have waited on these, I feel like I got tossed sone particularly jank eggs. I know this is fuckcombustion so please excuse the ashes in there, I have no functioning nail for this since the 3 ceramic nails they sent me all dont fit but I wanted to use my egg so I bust out a bowl for it.
11101223_10203962052837749_821338345_n.jpg
 
Last edited:
vicious916

vicious916

Dab Connoisseur
619TangerineOG said:
Damn out of all 3 of my eggs none of the ceramic nails they sent me fit in the glas on glass fitting. Looks like they sent you one that fit fine mrgohamilton. And update on mine, one of the 3 eggs has a pinhole leak. Heres a video of it

Im going to ask for a replacement. I knew this one hit funny but it took me a while to figure out why.
Click to expand...
sorry to hear that maybe you can ask for a refund and get the one with the better perc whenever it gets released
 
mrgohamilton

mrgohamilton

Well-Known Member
619TangerineOG said:
Damn out of all 3 of my eggs none of the ceramic nails they sent me fit in the glas on glass fitting. Looks like they sent you one that fit fine mrgohamilton. And update on mine, one of the 3 eggs has a pinhole leak. Heres a video of it

Im going to ask for a replacement. I knew this one hit funny but it took me a while to figure out why.
Click to expand...
vicious916 said:
sorry to hear that maybe you can ask for a refund and get the one with the better perc whenever it gets released
Click to expand...

are yall other sellers on dhgate??
 
Last edited:
mrgohamilton,
rakka

rakka

Vaped
ataxian said:
For less than $30 to our front door the D020 is made for a SOLO if you like cannabis?
Click to expand...

Oh I'm well aware of the usual pieces for the solo, had various 18mm bongs, gb-187, d020-d etc. And I actually prefer the larger D020-D over the standard D020... Actually ordered my third D020-D the other day.

I'm just seeing a decent amount of praise for the kathy/CCG eggs and was wondering if they would still work with the Solo as 'just for fun' piece.

Or hell even any other piece that recycles and/or vortexes :D

Looking into the wings of liberty torus clone, love that it has an 18f joint... a bit on the expensive side for me right now though.
 
H

Herr_Dampf

Well-Known Member
rakka said:
Oh I'm well aware of the usual pieces for the solo, had various 18mm bongs, gb-187, d020-d etc. And I actually prefer the larger D020-D over the standard D020... Actually ordered my third D020-D the other day.

I'm just seeing a decent amount of praise for the kathy/CCG eggs and was wondering if they would still work with the Solo as 'just for fun' piece.

Or hell even any other piece that recycles and/or vortexes :D

Looking into the wings of liberty torus clone, love that it has an 18f joint... a bit on the expensive side for me right now though.
Click to expand...

I feel the Solo/Air has to much restriction to be fun with a recycler. Tried it with both of my 18f recyclers and the restriction pretty much prevented any recycle action from happening.

Got the Upline knockoff a few days ago, this one works great with the Solo/Air imho.
http://www.dhgate.com/store/product/new-lighters-for-vaporizer-lighter-amazing/231109051.html
 
You must log in or register to reply here.
Top Bottom