Cheap High Quality Bubbler

snamuh

ghost
You guys must have been on the first page of orders. I am on the 3rd page, and nothing yet. It will get here, just probably not before the holiday. Not even bothersome.

Some of us are kinda spoiled having only started buying China glass since 10 day shipping became the norm. I know 30 days used to be more typical and now THAT is the exception.

I believe I was the sixth person to order and I haven't heard a thing. not worrying or complaining though, this is my first time getting big kid glass haha, also my second order from china... my first order ( a lighter) from DX never showed up.
 
I suggest you guys order a couple of pieces, and don't stop at one and wait on it. No,no,no that's Just doing it all wrong. You want to place numerous random orders to the point you forget about a couple. That'll keep ya from searching for packages and also get that G.A.S flared up. Think Chili with extra beans. In the China thread we buy glass daily in tribute to all the Fine China and Bone China!! I'm so baked, carry on earthlings
 
Last edited:

ataxian

PALE BLUE DOT
I suggest you guys order a couple of pieces, and don't stop at one and wait on it. No,no,no that's Just doing it all wrong. You want to place numerous random orders to the point you forget about a couple. That'll keep ya from searching for packages and also get that G.A.S flared up. Think Chili with extra beans. In the China thread we buy glass daily in tribute to all the Fine China and Bone China!! I'm so baked, carry on earthlings
GSC Paris OG king Louie 13 og gold dust kief

China glass.

Not sure which one?
 

Tweak

T\/\/34|<
i'll upload more pics with my DSLR, if anyone is interested.
@lockedhead id love if you could post functionality vids! I was debating getting a price like like for myself. Looks absolutely beautiful:love:

I concur. More photos and a video, please. :D

I normally don't like two perc/chamber pieces, but that piece looks impressive. Just wish it where female joint, :\.
 
Here are some more pics and a vid!

Not bad for a first piece!
d4FSRML.jpg



Size comparison to ketchup bottle:
StTmEa6.jpg


The percs:
vXIkduV.jpg


With water:
JauBqkz.jpg



Video: Just water, no smoking. I might make a smoking vid tomorrow. Don't have any concentrates on me, so it will have to be with herb.



As you can see in the pics now, I have used it a little bit. It went through 1 small bowl of herb, and about 13-14 medium sized dabs(Not all of them by me of course).

Hits were very smooth, I very rarely take dabs, so when I do, I cough a fuckton, but with this I barely felt anything. My friends who are more experienced smokers than me were also impressed by it.

Splashback does not seem to be a problem unless you overfill the perc. Also it is malejointed and 18mm. had to find a 18mm female bowl for it.

The glass nail is kind of fragile, it got stuck in the bong and I accidentally chipped it while trying to take it out. I will probably be purchasing a cheap Ti nail in the future.

Only thing that I am worried about is cleaning it. Looks like it might get a bit difficult due to the intricacies in the glass.

Let me know if you guys have any questions or anything! SO happy with this piece, hopefully it will last a while.
 

flotntoke

thoroughly vaped
My FC-187 order reading, "Seller will deliver items within 4 days."

I was probably about a day and a half behind the very first orders.

Seems like maybe they are shipping as fast as they can produce and package them? Very glad to hear others statuses are moving to shipped. Shouldn't be too long now and hoping to be using this puppy on Christmas morn if not before.
 

cybrguy

Putin is a War Criminal
My FC-187 order reading, "Seller will deliver items within 4 days."

I was probably about a day and a half behind the very first orders.

Seems like maybe they are shipping as fast as they can produce and package them? Very glad to hear others statuses are moving to shipped. Shouldn't be too long now and hoping to be using this puppy on Christmas morn if not before.
I think @blankrider said the vendor had 100 pieces ready when the FC-187 first appeared. It's way too early to be at all concerned, but he should have been able to start shipping on day one.
I am anxious to hear a review, tho, as my appetite is certainly whetted. I look forward to the first piece arriving. I'm sure whoever gets it first will get a function vid up right away... (Hint Hint) ;)
 

CarbonFiberGuy

Well-Known Member
Can I get some of your guys advice . I want to get a glass bubbler to pair with a Arizer Air And Crafty . Just from looking through this thread I was thinking like a d020-d , a Gb186-1(maybe to big for the crafty and Air), and of course a FC-187 . Now I know no one has a FC-187 yet ,but theoretically would a crafty or a air be sufficient to use with this piece and get proper hits ? Also I am very new to glass and I'm trying read and learn as much as I can , but any recommendations of other pieces with links through dhgate would be extremely helpful . Very Excited to add GAS to my new VAS problem .

Also I asked the seller what the joint size was and he said 18.8mm .So to make my crafty work with this unit I had to hack off the bottom of a spare cooling unit ,and I need a glass fitting to attach to the top. How specific is glass joint size ? Like will a 18 or 19mm joint work in a 18.8mm joint , or do I need an exact 18.8mm ? Where is a good place to buy these joints, Since I had to destroy a $20 cooling unit I want to make sure I put a good quality adapter on it. The Air I have a PVHES 14mm GonG stem so I probably need the same glass piece used backwards to get that to work . Thank you for any insight you may be able to share
 
Last edited:
CarbonFiberGuy,

ataxian

PALE BLUE DOT
Can I get some of your guys advice . I want to get a glass bubbler to pair with a Arizer Air And Crafty . Just from looking through this thread I was thinking like a d020-d , a Gb186-1(maybe to big for the crafty and Air), and of course a FC-187 . Now I know no one has a FC-187 yet ,but theoretically would a crafty or a air be sufficient to use with this piece and get proper hits ? Also I am very new to glass and I'm trying read and learn as much as I can , but any recommendations of other pieces with links through dhgate would be extremely helpful . Very Excited to add GAS to my new VAS problem .

Also I asked the seller what the joint size was and he said 18.8mm .So to make my crafty work with this unit I had to hack off the bottom of a spare cooling unit ,and I need a glass fitting to attach to the top. How specific is glass joint size ? Like will a 18 or 19mm joint work in a 18.8mm joint , or do I need an exact 18.8mm ? Where is a good place to buy these joints, Since I had to destroy a $20 cooling unit I want to make sure I put a good quality adapter on it. The Air I have a PVHES 14mm GonG stem so I probably need the same glass piece used backwards to get that to work . Thank you for any insight you may be able to share
Bubblers - ash collector with jhooks for portables!
Hydro tubes I ever had luck with.
 
ataxian,

hanfhead

is high
Grabbed a d020-x to use my coupon since it expires tomorrow. It is like the d020--2-w but not a sidecar. I love the d020--2-w and use it daily. Only problem is when company is over hitting it on the desk, everyone has to squat to hit it. I was going to buy another *--2-w anyway so I figured I might as well try something different, but still the same.

D020-X
NtLgSI3.jpg

http://www.dhgate.com/product/d020-x-glass-water-smoking-pipe-with-two/192446141.html


D020--2-W
6OzSP4r.jpg

http://www.dhgate.com/store/product/d020-2-w-glass-water-smoking-pipe-with-two/193620248.html
 

oli

Well-Known Member
Can I get some of your guys advice . I want to get a glass bubbler to pair with a Arizer Air And Crafty . Just from looking through this thread I was thinking like a d020-d , a Gb186-1(maybe to big for the crafty and Air), and of course a FC-187 . Now I know no one has a FC-187 yet ,but theoretically would a crafty or a air be sufficient to use with this piece and get proper hits ? Also I am very new to glass and I'm trying read and learn as much as I can , but any recommendations of other pieces with links through dhgate would be extremely helpful . Very Excited to add GAS to my new VAS problem .

Also I asked the seller what the joint size was and he said 18.8mm .So to make my crafty work with this unit I had to hack off the bottom of a spare cooling unit ,and I need a glass fitting to attach to the top. How specific is glass joint size ? Like will a 18 or 19mm joint work in a 18.8mm joint , or do I need an exact 18.8mm ? Where is a good place to buy these joints, Since I had to destroy a $20 cooling unit I want to make sure I put a good quality adapter on it. The Air I have a PVHES 14mm GonG stem so I probably need the same glass piece used backwards to get that to work . Thank you for any insight you may be able to share

Can the Air and the Crafty handle the GB-186... for the Air I do not know but for the Crafty you might want to check this post

http://fuckcombustion.com/threads/the-crafty-by-storz-bickel.15984/page-93#post-705838

The GB-186 in full glory, well almost :rofl:

As regards to the joint, I cut a male to male adapter but a simple 18.8 to 14.5 reducer will do the trick

http://www.dhgate.com/product/18mm-...ducer-adapter/184053538.html#s1-6-1|388362659
 

nihil

Member, Known Well
Grabbed a d020-x to use my coupon since it expires tomorrow. It is like the d020--2-w but not a sidecar. I love the d020--2-w and use it daily. Only problem is when company is over hitting it on the desk, everyone has to squat to hit it. I was going to buy another *--2-w anyway so I figured I might as well try something different, but still the same.

D020-X
NtLgSI3.jpg

http://www.dhgate.com/product/d020-x-glass-water-smoking-pipe-with-two/192446141.html

That is my 2nd favorite piece (followed by the GB-187). Great perc for general use, the splash guard works nicely, it's easy to clean, and I like the size of the can when paired with my enano.

I also have the sidecar version and hate craning my neck to use it. Since I procured this guy, I haven't used the sidecar to often.

My only complaint is the male joint. I believe yingman has a female version, but a female GonG from @VaPeD&CoNfUsEd solved this problem for me.

Great piece, worth getting if you are on the fence about it.

Edit: Image with JoDa GonG:
7FTHZGc.jpg
 
Last edited:
Top Bottom