Cheap High Quality Bubbler

Do you guys think for the most part vendors all get there glass from a lot of same sources or are some vendors pieces actually higher quality and blown in their own factory. Sometimes I think there are slight differences in the bongs between vendors but that could just be me.

http://www.dhgate.com/store/product/2014-new-design-two-functions-recycle-glass/214312528.html

An example is the double barrel I linked above. Is this the same one as other vendors recycler or to me it seems to have some minor changes in previous ones I have seen.
I dont know what's different but it seems different and better quality. What differences did you notice
 
Cannabis Connoisseur,
  • Like
Reactions: BoogerMan

Delta3DStudios

Well-Known Member
Accessory Maker
Do you guys think for the most part vendors all get there glass from a lot of same sources or are some vendors pieces actually higher quality and blown in their own factory. Sometimes I think there are slight differences in the bongs between vendors but that could just be me.

http://www.dhgate.com/store/product/2014-new-design-two-functions-recycle-glass/214312528.html

An example is the double barrel I linked above. Is this the same one as other vendors recycler or to me it seems to have some minor changes in previous ones I have seen.

I think there's a handful of blowers out there that sell their glass to many vendors on the site. In general, each blower does their own models, so if you see 50 vendors with the same glass piece, most likely it was made by the same vendor.

HOWEVER In the past such as the case with the original D020 - once it gained popularity, several knockoffs came about (and I still see several on Dhgate), they looked very similar to the original D020, but the build quality was way worse than the OG, clearly made by a different factory (funny, one chinese company copying the design from another vendor, way to steal your OWN designs for once!)

I haven't heard of any differences like that with the Double Barrel, so it's probably safe to assume it was made at the same factory.

Actually, come to think of it, here's a piece which I've seen at least 4 or 5 different versions:
temp2.0x0.jpg


They all have the same price, and look similar, though the vortex bulge near the mouthpiece changes shape - sometimes I see them smaller and more round, sometimes I see them long like this one. Also the recycler output is sometimes on the bottom of the rig, and sometimes raised up slightly like this one.

Here's a VERY similar piece, with a different perc - they could have been made at the same factory, but the pictures and build quality are different enough that one could have been a copy from the other
rBVaHVROPSiADiPIAAKzHGWsstk688.jpg
 

flotntoke

thoroughly vaped
Sidecar=little diffusion?

Don't think the sidecar really affects diffusion itself. But, I don't yet have any glass with exact same diffusion and a sidecar vs. straight MP (tho imagine many of us will soon with new FC-187 ;)), so hard to say for certain. Even my D020 and D020-W are just a bit different - but no noticeable effect due to sidecar vs. straight.

Do think a sidecar can help much in keeping diffusion low, though. With my nano on any of my sidecar pieces I can glance down and see the action. This is great for adjusting draw and "tweaking" diffusion as you like. Also, avoids some of the learning curve with a new piece. Just got my GB-187 and definitely not hard to get the hang of, but hard to tell initially if bubbling just how I like without a mirror. Have actually hit it a few times in front of mirror already, and now have it down pat.

Other pieces can allow you to watch the bubbles, too. My inline triple donut is a good example. But, if you want a nice cylindrical can (esp. with a Dewar joint), seems sidecar is the best way to watch.

For me, mad bubble stacking isn't really a good thing until the clear. But, if you like a chamber full of bubbles and aren't concerned as much about flavor (or don't think diffusion has any effect on flavor), I don't think a sidecar will increase or decrease diffusion. Just set it up like you normally do and draw like crazy. The advantage of the sidecar would be you get to see all those bubbles more.
 

turdhole

vagabond
again! i have won coupons on the turkey spin yet they are no where to be found...DHgate is really trying to make me save my money i guess
 
turdhole,
  • Like
Reactions: 421

ChippyMalone

Be here now.
Accessory Maker
again! i have won coupons on the turkey spin yet they are no where to be found...DHgate is really trying to make me save my money i guess
I thought about that too. Decided not to even considering ordering anything until I see if I get anything better than a $10 coupon once the promo ends.

Getting your customers to hold off buying for two weeks is not the best way to drum up holiday sales. Ha!
 
ChippyMalone,

alltoreup

Damn you, party liquor
My GB-242 from yingmin is out for delivery. I used my $5 coupon last Wednesday to purchase. That's 8 days from China to Tennessee. Amazing! Its going to beat the drop down I ordered the same day from the states.
 

Delta3DStudios

Well-Known Member
Accessory Maker
OK folks here it is. The FC-187 available for sale soon....
other_949069651_00.jpg

other_949069701_00.jpg

other_949069730_00.jpg

and for the amazing price of $40

:rockon::clap:

We've only been asking for this for how long???? Lol, I'm still thrilled to have seen it come to life. I already promised my wife if I bough this piece, I'd sell my D020-W.

Planning to buy one from the first batch, who knows if all of them will look as nice as this
 

blankrider

Well-Known Member
I am so excited to be able to make this happen for you guys. FC has really changed my life and I owe every single person who helps make this site the what it is.

If I had never come to FC my life would be void of cranberry extract rez block. Thank you to whoever figured that out. I would not own a E-nano. Thank you everyone who recommended it, truly one of the best vapes ever. I would not own a steam roller stem or carbed gongs, many thanks @VaPeD&CoNfUsEd. I would not have an amazing affordable collection of China glass. Thank you whoever found the original D020 and DHgate none of this would be possible without you. Seriously thank you everyone!

I will be doing my best to bring you the most sought after glass designs so if you have any suggestions let me know. This seller has done us an incredible favor by listening to our input and we should help him get sales in return. Therefore I ask that your request be very popular models and not just something you like yourself. Like I know everyone wants more hydrotubes because this is a vape site but they don't account for lots of sales. Peyote pillar on the other hand is something worth looking into
 
Last edited:
I thought about that too. Decided not to even considering ordering anything until I see if I get anything better than a $10 coupon once the promo ends.

Getting your customers to hold off buying for two weeks is not the best way to drum up holiday sales. Ha!

Ya, when i won a $5 and $10 coupon that did not show in my account, of course, I asked customer support about it. They had the nerve to ask if I taken a pic of turkey when I won the coupons. I should have replied sure good thing I randomly take screen shots all the time just in case i need them. I was assured it would be taken care of friend. I have been holding my breath since...
 

Tweak

T\/\/34|<
@blankrider The new FC-187 looks awesome. Is he expecting to get these in stock before x-mas?

If I had never come to FC my life would be void of cranberry extract rez block. Thank you to whoever figured that out.

@t-dub started this thread, I'd heard of RB before that but it was the first generation formula (green). T-dub brought to our attention that there was a new pink/red formula that worked much better, :tup:.

@Roger D started experimenting with Cranberry Powder, but it wasn't until user @Fulvic found Nature's Answer Alcohol Free Cranberry Extract that they found a cheaper alternative, :bowdown:.

I would not have an amazing affordable collection of China glass. Thank you whoever found the original D020 and DHgate none of this would be possible without you. Seriously thank you everyone!

Thanks to hanfhead correction, it was @Vaporgin that found the D-020 but it was @jambandphan03 that first order from DHGate.com and one of the first to review the D-020.

My how this thread as snowballed since then.
 
Last edited:

BoogerMan

Well-Known Member
I am so excited to be able to make this happen for you guys. FC has really changed my life and I owe every single person who helps make this site the what it is.

If I had never come to FC my life would be void of cranberry extract rez block. Thank you to whoever figured that out. I would not own a E-nano. Thank you everyone who recommended it, truly one of the best vapes ever. I would not own a steam roller stem or carbed gongs, many thanks @VaPeD&CoNfUsEd. I would not have an amazing affordable collection of China glass. Thank you whoever found the original D020 and DHgate none of this would be possible without you. Seriously thank you everyone!

I will be doing my best to bring you the most sought after glass designs so if you have any suggestions let me know. This seller has done us an incredible favor by listening to our input and we should help him get sales in return. Therefore I ask that your request be very popular models and not just something you like yourself. Like I know everyone wants more hydrotubes because this is a vape site but they don't account for lots of sales. Peyote pillar on the other hand is something worth looking into

Thanks @blankrider!!!! You are the fucking man!

I think a lot of people would like to see a regular style Klein with a 18mm FEMALE joint for $40-$50. Kleins with female joints seem almost impossible to find at a decent price.

Not sure if this is possible but if the seller can make an incycler Klein I'm assuming they can make a normal Klein as well :) maybe even the donut style that doughboy was going to do. I'd buy a handful for sure!!

A fab egg with a female joint would be sick too but that may be pushing it as I'm sure those are definitely not easy to make.

And idk about others but I've always wanted a Swiss perc rig or bubbler of some sort so I'm with @Cannabis Connoisseur about the Swiss perc recycler.
 
Last edited:

hanfhead

is high
I looked it up before but couldn't remember who, AFAIK it was @olivianewtonjohn that found the D-020 but it was @jambandphan03 that first order from DHGate.com and one of the first to review the D-020.

My how this thread as snowballed since then.

I think the first d-020 ordered was @Vaporgin.

http://fuckcombustion.com/threads/cheap-high-quality-bubbler.5255/page-102#post-493416

jam and I both ordered one that day.

And it's hard to believe it has been over a year and 400 pages in this thread.
 

BoogerMan

Well-Known Member
:rockon: got the double vortex rig ordered :) :) asked for all clear, no color, in the comments, we will see what they send me... http://www.dhgate.com/product/new-c...r/213566402.html#myaccount_orderdetail-1-null

also just ran across a $17 swiss perc AC on ebay : http://www.ebay.com/itm/Honeycomb-G...t=LH_DefaultDomain_0&var=&hash=item43d346e97c

Hey @jambandphan03 did you ask before hand if they had clear or did you just put a note in the comments section during checkout?

I think they only have the one with black drips but if they have clear I'm ordering one now lol.
 
BoogerMan,

Tweak

T\/\/34|<

jambandphan03

in flavor country
I didn't ask, just commented, I don't mind either way, really the color is fairly non intrusive, the drips are sort of silly, but I can live with them. I am more concerned about getting a solid piece, a couple of my Kathy pieces have had pin holes in the welds that I had to seal up.
 
jambandphan03,
  • Like
Reactions: nihil

BoogerMan

Well-Known Member
Yeah I know what you mean! Have confidence with this order being a solid piece. Kathy has come a long way as far as quality goes with her newer pieces compared to the older ones.

My first 2 pieces from Kathy had lots of defects especially compared to the quality of SSS.

However my last 5 pieces I have ordered from her have all been much much better quality :)

Can't wait to see your review and video!
 

hanfhead

is high
Thanks for the correction. :wave:

I had lost my lust for glass because I was tired of paying $100 for a decent piece. The D-020 pulled me right back in, love my Cheap glass.

Same here. Before that, the last thing I bought was a 200 dollar SYN years ago. Then when this thread came up and the d-020 was posted it changed my thoughts on cheap glass. Until dhgate, to me the only available china glass was local overpriced head shop pieces with way too many tree percs. Now I get to own a wide selection of styles and percs for the price of that one syn tube.
 

olivianewtonjohn

Well-Known Member
@hanfhead @Tweak yeah I was definitely late the the d020 party

I meant thats what im looking for in the other piece.

and @flotntoke

Sorry I was not clear. What I meant was that the matrix perc seems like it has pretty high diffusion. I mean thats the beauty of the piece IMO, mad stackage.

@flotntoke you do bring up a good point about controlling the pull and decreasing diffusion

Also maybe its just me because I use the cloud with it and it has high airflow?
 
Top Bottom