Cheap High Quality Bubbler

photobooth

Well-Known Member
99% sure that is not a recycler. It is a modified rip-off of a Mothership ball rig:
488A1371_zps248ed0f3.jpg

Basically the downstem penetrates the can and there is an open space in the middle but no recycling action.
 

blankrider

Well-Known Member
I am going nuts inside trying not to order that knock off ball rig this very second!

The only thing stopping me is the angle of the joint and the thought of what they will release next. Something even better maybe. Perhaps a Klein, who knows.

Must resist. Must resist
 
I am going nuts inside trying not to order that knock off ball rig this very second!

The only thing stopping me is the angle of the joint and the thought of what they will release next. Something even better maybe. Perhaps a Klein, who knows.

Must resist. Must resist
Please do,that shit is a horrible rendition. Heres my knockoff of the same piece
41380724-0782-4270-96DC-ED8E6FDF7B86_zpsfry2ik37.png
 

Rrose Selavy

log enthusiast
hey guys i got my YQ42 today... it some how scanned as delivered before ever leaving the first sorting facility. go figure.

the quality on this piece is unbelievable, the glass is incredibly thick and i can find zero flaws.

i am having trouble getting the water level right for the honeycomb/ bottom perc. i dont have any experience with honeycombs. it seems that the level can only be so high before the water travels into the second perc when pulled.

@Frederick McGuire im excited for you to get yours!
 

equatorgringo

Well-Known Member
Looking really close at the pics of that dhgate ball rig it's just really dodgy/cheap/thin/wavy looking at almost every point. Seems like a different quality from the bubblers we are used to seeing (maybe due to more bends and complicity in general?). Jmo
 
Can you please provide a link. Do you have a picture or video of yours? Does it have that horrible logo? I much prefer all clear with no labels
Yes it has the horrible labels, and heres a vid from BAD ASS GLASS theirs doesn't have any labels
and pic of my personal piecee. My build quality is far more superior than the one in the vid
pj0g.jpg
 

G Hog

Member
Greetings All! I have been following this page for two months and have six new pieces to show for it. Thanks to all of you for all the great info and the lively discussion.

So, to all of you looking for this sidecar GB-187 have you seen this piece?

http://www.dhgate.com/store/product/2014-new-design-tall-7-5-quot-clear-water/202724345.html

Sorry, I am a complete noob and don't know how to post pics but I find this piece really interesting for all the reasons people like the sidecar 187 but also because of the unusual base. Can't quite tell if it has a huge reservoir at the bottom or just a big, round, open base but either way it looks interesting. Be interested to hear what others think cuz I am considering indulging in another piece soon.
 

alltoreup

Damn you, party liquor
^^^ I really don't know how you cover the perc on that piece with water and not have water splash back into the joint when you pull your vape or whatever to clear the piece.

**edit... I'm vaped. The bottom stays dry and you cover the perc on top with water. Interesting, but I bet you pull some water into the mouthpiece from needing that much water in the top chamber to cover that perc.

I really don't know why that bottom chamber is so big...I don't see how putting water in there would even work.
 
Last edited:

ou812?

Well-Known Member
Greetings All! I have been following this page for two months and have six new pieces to show for it. Thanks to all of you for all the great info and the lively discussion.

So, to all of you looking for this sidecar GB-187 have you seen this piece?

http://www.dhgate.com/store/product/2014-new-design-tall-7-5-quot-clear-water/202724345.html

Sorry, I am a complete noob and don't know how to post pics but I find this piece really interesting for all the reasons people like the sidecar 187 but also because of the unusual base. Can't quite tell if it has a huge reservoir at the bottom or just a big, round, open base but either way it looks interesting. Be interested to hear what others think cuz I am considering indulging in another piece soon.


DYSFUNCTION JUNCTION...... Why not put a solid base on it? with a reservoir of water as large it reminds me of the faux tornado rig that some of us investigated.Dont waste your $$ bro, looks interesting but its useless for the most part.YMMV
 

BoogerMan

Well-Known Member
If I had to choose between the two pieces I would go Alina all day. The mp style and placement and polished slits are cool but not for more than twice or three times the price. Plus look at the joint, the slant on the top pic is no beuno for a vape, even with that low center of gravity, snap. The joint on Alina is straight up, I can rest my Nano on top with ease and my LSV violates this beauty with no tips as well. This piece gives me confidence in Alina's other products bc it's very clean and uniform.
Hey @SSVUN~YAH! Glad to see your input :D

Mine doesn't have the slanted joint when I ordered from GPM. It is perfectly straight like Alina's, luckily :) I like straight over the slanted joint for most of my rigs.

For a vape, @SSVUN~YAH is right, Alina's pieces is definitely better cause it looks like the mp is longer too. I use it for oils cause this piece is a little too small for my vape preference. I like em bigger for vapes and smaller for oil rigs.

The ioffer price of $110 is outrageous. Go with Alina's.

For me though, I do not regret paying over twice as much 6 months ago when I got it. I guess I see the steeper price as a early release and quality fee lol.

Many of the dozens of DHgate pieces I have bought have had small flaws (uneven cuts on the perc, not fire polished, crooked joint and mouthpiece, wobbly base, etc). With most pieces it's not a big deal, but with a few pieces I would gladly pay double the price if the quality is perfect cause that still would be wayyyy cheaper than the brand name. I love the GB-187, but the mouthpiece was slanted to the right and the dewar joint wasn't centered and the top of the van wasn't perfectly flat. It stood out next to a few other DHgate pieces I have that are luckily perfect quality. I sold it cause I couldn't stand it anymore :( damn me trying to be a perfectionist with "cheap quality glass".

On another note I'm so happy to see recyclers popping up and knock offs of c2 and mothership!! FINALLY :);):D:lol::cool::brow::ko::o:nod::clap::tup::rockon::bowdown::luv::love::haw::whoa::lmao::leaf:
 

alltoreup

Damn you, party liquor
I bought one of these:
http://www.ebay.com/itm/19-26-Three...661?pt=LH_DefaultDomain_0&hash=item4d13c32fd5

Was wondering if anyone has seen shorter claisens (less height)? With my cloud+, claisen, and GB187 it does not feel very stable. Kind of tip happy. I can use it carefully but I rather find something more stable (this is with using the cloud

I have 4 Claisens from 4 different manufacturers and they are all around that size. The shortest one I have is about 4" total. I doubt you will find any shorter ones without having it custom made.

FWIW I use the shortest claisen with my evo inverted on the 187 on the non centered joint of the claisen all the time with no tipping issues but there's no way I'd put a cloud+ on it that way due to the weight.
 
Last edited:

alltoreup

Damn you, party liquor
Another answer from yingmin about the 187 sidecar is below. The first part is about a Sheldon black knockoff piece I've been looking at that's only ever been offered as a lot of 6. Hope he can get it.

"Dear friend,of course,i can get this pipe,it is very easy,but maybe need to wait some time,and about the gb-187,we meet some problems of production,so we have to delay to produce.thanks that you like my product.thanks and best regards"

Edit- happy 10,000th post cheap bubbler thread!

Also just got shipping notification on the Kathy ratchet recycler. That took around a week.
 
Last edited:

ohdono

high more than not
hey guys does anyone know how the kathy double barrel hitman knock off is comapred to the btoc one? right now btoc's price is alot higher than kathys but i kinda remember some talk earlier in this thread that btoc had a better quality one in terms of size and hitting? please help me confirm, thanks i appreciate it
 
ohdono,

Frederick McGuire

Aggressively Loungey
hey guys does anyone know how the kathy double barrel hitman knock off is comapred to the btoc one? right now btoc's price is alot higher than kathys but i kinda remember some talk earlier in this thread that btoc had a better quality one in terms of size and hitting? please help me confirm, thanks i appreciate it
No idea about the btoc one, but I have the Kathy one and I've got nothing to complain about regarding build quality.

They function of the piece doesn't do it for me as much as I thought it would, but I think that's jut the design, not necessarily anything to do with Kathy's model.
 
Frederick McGuire,
  • Like
Reactions: blankrider

Zebowski

Custom Title
Was wondering if anyone has seen shorter claisens (less height)? With my cloud+, claisen, and GB187 it does not feel very stable. Kind of tip happy. I can use it carefully but I rather find something more stable (this is with using the cloud

Beside the custom Claisen idea, you might consider a GonG with a carburetor tube. @VaPeD&CoNfUsEd over on the JoDa Glass thread makes them for Nano and Solo, not sure if he can do the Cloud+. Oregon Glassblowers is another name I've heard for custom work. Good luck!


just got shipping notification on the Kathy ratchet recycler. That took around a week.

For what it's worth, I just got my shipping notice from SunshineStore in a day.

Welcome @KickstandKevin ! :wave:
 
Last edited:
Top Bottom