Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
215z
Well-Known Member
so @PoopMachine do you get water in your mouth or not?
PoopMachine
Well-Known Member
You will if you fill it up too much.. with a slide in it isnt too bad so with an Evo or something it would probably be fine.
ataxian
PALE BLUE DOT
I have that one!Just confirmed via Kathy it's a 18.8mm female joint, not 14.4mm like the description says.
Hm. I think am going to look for a 14mm female to 18/19mm female adapter and get a nice micro piece.
edit: Pulled the trigger on this guy, pretty sure others must have it on here, one of kathy's top selling pieces. Going to pair it with my E-Nano and this sturdy adapter, hoping to get some awesome low temp high flavor hits.
For flower vaping it's too hot for me.
I dab with and like it.
For flowers I like a little more volume.
This cheap $29 D020 is the smaller bubbler for flowers.
I use the SOLO during the daytime.
The NANO for evenings.
The LOTUS before bed!
Dangus
Yeah, well, that's just, like, your opinion, man.
http://www.dhgate.com/product/390mm-height-creative-design-two-function/200860872.html
a tad pricey, but nice to see the swiss percs showing up
a tad pricey, but nice to see the swiss percs showing up
ataxian
PALE BLUE DOT
I was going to get this one however I would break of the feed stem in one minute into the session.http://www.dhgate.com/product/390mm-height-creative-design-two-function/200860872.html
a tad pricey, but nice to see the swiss percs showing up
There is no support for a vaporizer.
If your a bowl burner it's perfect however not for a vaporizer!
Dangus
Yeah, well, that's just, like, your opinion, man.
Agreed. Would be nice to see some support on that stem. Would also like to see the bubbler style show up...
ataxian
PALE BLUE DOT
I like the piece a lot.
With a smaller bent mouth piece and support for a vaporizer with the design!
I would buy it!
The way it comes?
demonscars
Well-Known Member
Ordered a d020-w from sunshinestore yesterday afternoon and it shipped last night. I was looking at this: http://www.dhgate.com/store/product/290mm-height-two-function-use-umbrella-and/198034226.html from a few pages back, but with shipping it was almost $50, still cheap. I couldn't find any videos of a similar product in use and didn't wanna blow $50 on something I was unsure of.
Also thought I lost my d020-k the other night when a new kitten bumped it off a table accidentally. There was glass and water everywhere and I was obviously worried about the cat so I ran around like a crazy person cleaning up the pieces as fast as I could. It wasn't till a few minutes later that I realized none of the pieces I'd cleaned up were of the actual bubbler, just a super cheap 18mm female to 18mm female adapter!
ETA: replaced that cheapo eBay adapter with one from Oregon Glass Blower, made same day & shipped next and wow the difference in quality is amazing.
Also thought I lost my d020-k the other night when a new kitten bumped it off a table accidentally. There was glass and water everywhere and I was obviously worried about the cat so I ran around like a crazy person cleaning up the pieces as fast as I could. It wasn't till a few minutes later that I realized none of the pieces I'd cleaned up were of the actual bubbler, just a super cheap 18mm female to 18mm female adapter!
ETA: replaced that cheapo eBay adapter with one from Oregon Glass Blower, made same day & shipped next and wow the difference in quality is amazing.
Last edited:
Frederick McGuire
Aggressively Loungey
http://www.dhgate.com/store/product/2pcs-lot-glass-water-pipe-glass-adapter-jiont/196104896.html
Edit:
Between kathy & sunshine we've got most adapters covered.
14 fem - 18 fem (link above) - kathy
14male - 18 fem http://www.dhgate.com/store/product/2pcs-lot-glass-oil-adapter-jiont-14-4mm-male/196104550.html - kathy
14 fem - 18male (not low profile) http://www.dhgate.com/store/product/2pcs-lot-glass-water-pipe-glass-adapter-jiont/196104757.html - kathy
14 fem - 18male (low profile) http://www.dhgate.com/store/product/male-18-8mm-amp-female-14-5mm-glass-adapter/190729208.html - sunshine
18 fem - 18 fem http://www.dhgate.com/store/product/18-8mm-to-18-8mm-female-glass-adapter-straight/197859794.html - sunshine
And they've both got Whole bunch of male-male adapters too.
Last edited:
blankrider
Well-Known Member
Hey everyone!
I just got home from work and am excited to announce the arrival of a new Kathy piece. I don't know if this one has a name or number but here is the link
http://www.dhgate.com/store/product/two-function-blue-color-glass-bongs-water/199022739.html
First off I would like to say that this was the least damaged of any of my orders from China. My last couple from sunshine store looked like they had been stomped on. This package had ZERO damage and when I opened it I was shocked at how skillfully it was bubble wrapped. Like you know the amazing way they roll your burrito at Chipotle, it was like that.
The piece seems very nice and I cannot find any flaws. The color lip and base are classy and happen to match a cobalt blue gong. I had made by @VaPeD&CoNfUsEd . The percs are centered and not crooked. The slits are nice. The joint support is solid. The neck is slender with the perfect flared out mouthpiece. Just really a nice piece all around.
I just got home from work and am excited to announce the arrival of a new Kathy piece. I don't know if this one has a name or number but here is the link
http://www.dhgate.com/store/product/two-function-blue-color-glass-bongs-water/199022739.html
First off I would like to say that this was the least damaged of any of my orders from China. My last couple from sunshine store looked like they had been stomped on. This package had ZERO damage and when I opened it I was shocked at how skillfully it was bubble wrapped. Like you know the amazing way they roll your burrito at Chipotle, it was like that.
The piece seems very nice and I cannot find any flaws. The color lip and base are classy and happen to match a cobalt blue gong. I had made by @VaPeD&CoNfUsEd . The percs are centered and not crooked. The slits are nice. The joint support is solid. The neck is slender with the perfect flared out mouthpiece. Just really a nice piece all around.
Frederick McGuire
Aggressively Loungey
So its a 14mm male joint?
I've got a basically identical piece (that's supposed to be us made though) that's got an 18mm male joint...
Been tossing up whether to pick up one of these to compare...
This one actually looks like the amount of room for diffusion in the top chamber is better than my one, but its really hard to tell without having it in hand to compare.
Did they include the TI nail?
I've got a basically identical piece (that's supposed to be us made though) that's got an 18mm male joint...
Been tossing up whether to pick up one of these to compare...
This one actually looks like the amount of room for diffusion in the top chamber is better than my one, but its really hard to tell without having it in hand to compare.
Did they include the TI nail?
blankrider
Well-Known Member
They included a TI nail, glass nail, spherical shape dome, spherical shape slide, and cylindrical shape slide!
That's a lot of stuff!
And just so you folks know some shops will give you cash or trade for this stuff! I just took in some stuff I never used last week to my LHS and walked out with $40 cash. It paid for this new piece!
That's a lot of stuff!
And just so you folks know some shops will give you cash or trade for this stuff! I just took in some stuff I never used last week to my LHS and walked out with $40 cash. It paid for this new piece!
Frederick McGuire
Aggressively Loungey
Would the ti nail work with an 18mm rig without an adapter?
I've got a mate who's after a cheap nail, and if that one would work with his rig I'll just get that set and give it to him...
I've got a mate who's after a cheap nail, and if that one would work with his rig I'll just get that set and give it to him...
are there 14 male to 14 female adapters?http://www.dhgate.com/store/product/2pcs-lot-glass-water-pipe-glass-adapter-jiont/196104896.html
Edit:
Between kathy & sunshine we've got most adapters covered.
14 fem - 18 fem (link above) - kathy
14male - 18 fem http://www.dhgate.com/store/product/2pcs-lot-glass-oil-adapter-jiont-14-4mm-male/196104550.html - kathy
14 fem - 18male (not low profile) http://www.dhgate.com/store/product/2pcs-lot-glass-water-pipe-glass-adapter-jiont/196104757.html - kathy
14 fem - 18male (low profile) http://www.dhgate.com/store/product/male-18-8mm-amp-female-14-5mm-glass-adapter/190729208.html - sunshine
18 fem - 18 fem http://www.dhgate.com/store/product/18-8mm-to-18-8mm-female-glass-adapter-straight/197859794.html - sunshine
And they've both got Whole bunch of male-male adapters too.
blankrider
Well-Known Member
I was about to say probably not but I just tried it on 3 different 18mm joints and it didn't fall through any of them so I guess that it works on both joint sizes
BoricOxide
Well-Known Member
Stupid question but, what shows up on the credit card statement when ordering from DHgate? Does it say the sellers name, or DHgate?
Frederick McGuire
Aggressively Loungey
I didn't see any same size male-female adapters.
So no 14male-14 fem or 18male-18 fem.
But there was this:
14male - 18 fem http://www.dhgate.com/store/product/2pcs-lot-glass-oil-adapter-jiont-14-4mm-male/196104550.html - kathy
Which could be paired with this:
14 fem - 18male (not low profile) http://www.dhgate.com/store/product/2pcs-lot-glass-water-pipe-glass-adapter-jiont/196104757.html - kathy
To get 14male-14 fem.
Nice!
Thanks for checking so quickly.
Looks like I'm getting another dual matrix rig
Shows up on my statement as
"WWW.DHGATE.COM BEIJING"
Shows the same thing for kathy, sunshine, cleanclearglass, and another ecig seller so I assume all dhgate purchases will show that.
blankrider
Well-Known Member
I just did water test with it and it did not go as good as I was hoping. I feel like the percs function to well for its small size. The water from the bottom chamber makes its way to the top chamber and can even climb the neck.
It's like this thing has the perc power of the 187 and you can't put that kind of diffusion in such a small space.
If they kept everything the same but made the piece twice as big it would be an all star on this thread but sadly I fear that most people will not be happy with it when they try to use it.
It's like this thing has the perc power of the 187 and you can't put that kind of diffusion in such a small space.
If they kept everything the same but made the piece twice as big it would be an all star on this thread but sadly I fear that most people will not be happy with it when they try to use it.
syrupy
Authorized Buyer
Update, pre-nuptials with my beloved Kathy continue. 
Got a little care package from my sweets, a backup Babycakes and the 2 concentrate dish lot she offers. I maintain the 10mm cake rig is the highest quality in terms of function and appearance.
You can't have cake without dishes. The dishes are nice and small, maybe 2 inches across. The dropouts at the ends need to be deeper to properly hold a dabber. Both look more interesting than example in the listing.
This one's my favorite.
At less than $5 each, an FCer could buy two or four to find the nice one(s). ^^^
Got a little care package from my sweets, a backup Babycakes and the 2 concentrate dish lot she offers. I maintain the 10mm cake rig is the highest quality in terms of function and appearance.
You can't have cake without dishes.
The dishes are nice and small, maybe 2 inches across. The dropouts at the ends need to be deeper to properly hold a dabber. Both look more interesting than example in the listing.
This one's my favorite.
At less than $5 each, an FCer could buy two or four to find the nice one(s). ^^^
tiukauleh
Well-Known Member
sorry 'bout your piece of 'water-climber'. thanks for the update and saving me 40 bucks. at least you sold the rest of them stuff!
I was a little worried about that, on ny YQ42 the bubbles can get pretty close to mouth level and this has a lot less space.
Did you try really low water levels? Like barely above the slits?
PoopMachine
Well-Known Member
Picked up a custom recycler for Cannabis Connoisseur yesterday. Its a mini recycler with a big base on it and a 18mm female joint. It supports the Evo without problems due to the size of the base. It vortexes very nicely as well considering the feed for the recycling chamber is in the top. He had a Klein recycler he did yeesterday as well and Ive never seen anything whip water around like that thing does but the mini piece is top notch.
Id love to post pics but this is his piece so that honor will be his. Turn around time was less than a week. Price was under $100 not including freight.
He's also working on several larger recyclers including a triple Klein for another member here.
Id love to post pics but this is his piece so that honor will be his. Turn around time was less than a week. Price was under $100 not including freight.
He's also working on several larger recyclers including a triple Klein for another member here.
BoogerMan
Well-Known Member
Can't wait to see more of his work! <$100 for a recycler that supports the EVO. That's awesome! Congrats @Cannabis Connoisseur