Cheap High Quality Bubbler

[canj00digit?]

This is much better. If you like I'll try to get some made! I am not sure if water siphoning could ever be a problem here

I wish I could say I thought of this design but I saw it (well the original with the reclaim catcher as well) somewhere in some Sublimator group like 8yrs ago and thought wow that's perfect I want that for my Sub and that's when I had OGB make me one.

I never saw another like it but the one that I copied.
I've actually been pretty surprised to that the design hasn't popped up elsewhere (that I've seen) over those years.

SAML said he's going to make them, asked for a bit more details like measurements, so we'll see how he goes.

 

[condition]

Jeez Louise I paid 50 for my 2 pieces and they were very accommodating wrt declared cost so import duties was below 10€ iirc

The price for two 2nd quality pieces seems a bit expensive but I get the idea there's quite some quality difference within those qualities as well and that's reflected in price.

My 2nd quality incycler was pretty lousy for example but it was also heavily discounted. Inwas lucky they offered to replace it with a 1st quality one (my 1st quality 2-pc did have a small issue though, so it's kind of a combined compromise*). No shipping on the replacement and import duties were under 8€. Should be delivered next week.

*I forgot to mention they also gave me a partial refund on 2-pc. Good cs experience, definitely took away my initial disappointment


Yeah when I get a new piece I always use my phone cam to see what's happening.

Re GR customs: tax imposed is relative with weight and volume, LOL. To compare I also ordered a BCG, cost 140 including shipping and got 16 euro taxes, even though shipper has attached the receipt at the one side of the carton. I have requested them by email, after the order, if possible to declare smaller value for customs and they didn't.
TAG, received the same email from me and responded positively, however my order passed through physical customs inspection, I guess this means that they actually opened the box to inspect. So this was my experience even TAG declared lower value.

Re price of the incycler: I choose the second option price ascending and it is still available. The first option is 9" and wanted the 8" at the time. Although it is not possible to use it with CL, the Anvil fits better and it is how I use until I receive the drop-down adapter.

However I read that the water level is tricky, can you post a pic filled with appropriate water? I have the 8" version.

@Haze Mister you recommend the drop down from dhgate for it's shape? I cannot clearly understand from your post, you find it better from the usual shaped drop down because of the narrow connection of the 2 joints?

 

[Abele Rizieri Ferrari]

my order passed through physical customs inspection

Ah yeah then you're screwed

However I read that the water level is tricky, can you post a pic filled with appropriate water? I have the 8" version.

It's relatively forgiving. You have the hourglass style right? I had it filled to the most narrow part

 

[condition]

I have the 8" super slit puck Klein incycler
You mean here?

 

[Abele Rizieri Ferrari]

Here

 

[Shit Snacks]

Yes recyclers take a lot of water typically to function properly so the air flow can be tricky depending on the vape to get the full function without water in your mouth

 

[Abele Rizieri Ferrari]

Yeah o was gonna add depends a lot on how you draw, how much force. Your CL will keep up I think, Anvil I didn't like with any of the recyclers I tried it with. Heat retention seems to be the most important factor here, need it to get the functioning airflow

 

[tonuzzi]

The TAG fab klein has arrived... oh yeah!
(Sorry about the yellow colour, it's coming from nearby furniture. )

It's a "second quality" piece and has some visual imperfections- the swiss holes are not symmetrical and identical, etc.... but works really well and has the sweet colours. The pink accents at the perc are a nice bonus I hadn't noticed when ordering!

The airflow is wide open and the piece delivers the clouds and the flavours without the heat... the beveled adges of the mouthpiece feel great on the lips. The bubbler is seriously solid and totally wins over DHGate versions for quality, function and value for money at $150.

It does need a drop-down for using with anything bigger than a Dynavap or you'll have the vape in your face..

Thanks for the heads-up on these! This is definitely and honestly the last bubbler until I sell some bubblers!

Nice!
I had a 35% off coupon from a previous TAG purchase and this baby was on clearance, so I caved and grabbed the Blue Stardust accent piece to add to my TAG collection.

Love this piece!

https://imgur.com/HzmL4GU

 

[GratefulDread]

link

 

[tonuzzi]

https://imgur.com/a/PjDMaol

 

[Abele Rizieri Ferrari]

My TAG incycler replacement came in and they actually shipped two pieces!

They added a hourglass shaped one because that was my initial purchase and inwas kind of bummed out they couldn't replace it with a similar one as they didn't have it readily in stock. This one had some water droplets in the drain so my assumption is someone returned it for a refund and it was no longer sellable. No smell or anything fortunately hehe. It has a teeny weeny unevenness in the perc, which I imagine is why it was returned, so with slow draw not all the slits fire. But it's not really an issue with these style water pieces as they require more force anyway, and it functions just fine then.

So that's a nice surprise from TAG cs. They've really been accommodating in resolving my issues, even more than we agreed upon.

The straight one I got offered as the replacement is pretty perfect wrt build quality. Besides shape there's some other differences with the hourglass shaped one. The perc is smaller with less slits, which I expect may help with a stronger draw by adding some resistance. And the mp is a bit different as well, it has slightly protruding inner part. I've never used anything like that before and Im actually not even 100% if it's intended lol but oh well. First impression on the mp is pretty okay though comparing with these outward ended type of mp's. I'll have to use it more to see how I like it long term.

https://imgur.com/a/4XSnQzZ

(The one on the left in the first pic is the bunk one)

I kind of wanna go to the coffeeshop and get some hash to try them out (only checked for perc and drain without actual load rn) but I've been on a break for like a month and last time after a two week break I got really anxious even with micro dosing. So I'll probably order some cbd hash first in an attempt at making the return to thc more pleasurable.

 

[GratefulDread]

Some of you have probably seen this sample from SAML. Curious about your thoughts.. it looks a bit off to me.
He said he's also making a version that fits the dewar joint pieces so maybe that's what this is?
Hard to see the shape from one angle but is the bowl joint rotated too inward or something?
Not sure if he did the curve right, like the TAG ones.

 

[canj00digit?]

Some of you have probably seen this sample from SAML. Curious about your thoughts.. it looks a bit off to me.
He said he's also making a version that fits the dewar joint pieces so maybe that's what this is?
Hard to see the shape from one angle but is the bowl joint rotated too inward or something?
Not sure if he did the curve right, like the TAG ones.

Yeah, I told him to make a version that clears dewaar joints so this appears to be it.
But, like you say, hard to tell from the angle in the photo, but the bottom joint appears to be rotated too far inwards.

I asked him to make it an actual 'drop down' (unlike most of the stuff on dhgate) with a 2in/50mm drop as measured from top of piece joint to top of bottom joint. I see he did. Sweet.

 

[GratefulDread]

Yeah, I told him to make a version that clears dewaar joints so this appears to be it.
But, like you say, hard to tell from the angle in the photo, but the bottom joint appears to be rotated too far inwards.

I asked him to make it an actual 'drop down' (unlike most of the stuff on dhgate) with a 2in/50mm drop as measured from top of piece joint to top of bottom joint. I see he did. Sweet.

Yeah I gave him the same suggestion, regarding the lack of quality drop-down adapters on DHG.
I guess he had a few people mentioning it to him so he's determined to get it right.
I like the idea of the dewar compatible one, nice idea. Hoping he gets the regular version right too.
And yeah, I can't tell if it's an optical illusion but the bowl joint looks rotated too far inward.

 

[canj00digit?]

Yeah I gave him the same suggestion, regarding the lack of quality drop-down adapters on DHG.
I guess he had a few people mentioning it to him so he's determined to get it right.
I like the idea of the dewar compatible one, nice idea. Hoping he gets the regular version right too.
And yeah, I can't tell if it's an optical illusion but the bowl joint looks rotated too far inward.

I'm very glad he's getting input from multiple sources so there's a better chance to get it right.
The dewaar version was because a comment from @LesPlenty reminded me I've always been annoyed by lack of drops for dewaar pieces.

 

[Shit Snacks]

Haha yeah dewars can be pretty annoying to deal with in a few ways, and the China ones are often super deep...

Genesis Glass offered one of those twisted deep drop-downs, they can work with bangers in certain rigs, but I did the same thing and pointed out to them that they should be twisting it the other way ... That is why they offer that newer deep right angle 14-14, I am just still waiting for them to offer other sizes lol

 

[canj00digit?]

Some of you have probably seen this sample from SAML. Curious about your thoughts.. it looks a bit off to me.
He said he's also making a version that fits the dewar joint pieces so maybe that's what this is?
Hard to see the shape from one angle but is the bowl joint rotated too inward or something?
Not sure if he did the curve right, like the TAG ones.

This is the drawing he sent me after we discussed specifics.
You can see the bottom joint comes straight off the side in the drawing.

 

[GratefulDread]

This is the drawing he sent me after we discussed specifics.
You can see the bottom joint comes straight off the side in the drawing.

They usually come online around now so I'll see if I can get more info and report back.
Although, I'm not sure if they work Saturdays.

 

[Shit Snacks]

They are doing the straight fab as well, a short one and a small one, CaliBear FOL style... Plus FOL Klein incycler (outer drain) along with the modified FC-Mod meets Goo3piece... Good time for cheap glass lol

Fuck now I am telling them to bring back the classic inline honeycomb from 10 years ago!

 

[GratefulDread]

They are doing the straight fab as well, a short one and a small one, CaliBear FOL style... Plus FOL Klein incycler (outer drain) along with the modified FC-Mod meets Goo3piece... Good time for cheap glass lol

Fuck now I am telling them to bring back the classic inline honeycomb from 10 years ago!

Wow.. Not all heroes wear capes.
Are you responsible for the laser-cut percs that he sent me photos of too?!

 

[Shit Snacks]

Wow.. Not all heroes wear capes.
Are you responsible for the laser-cut percs that he sent me photos of too?!

Haha no I saw the news on Reddit before and just now giving them advice not to make the mouth pieces as shitty as those are lol

I'm not sure who told them to make that klein but that was the fol in the photo I saw

 

[GratefulDread]

Well then ya heard it here first.. laser cut percs coming from SAML...

 

[Haze Mister]

@Haze Mister you recommend the drop down from dhgate for it's shape? I cannot clearly understand from your post, you find it better from the usual shaped drop down because of the narrow connection of the 2 joints?

Yes. I just want to move the vape a little away from my face, and get a carb hole with a plug in the system. The more tubing you add to a rig, the more air you have to inhale along with your vapor so it kinda dilutes the hit. I get enough cooling from the bubbler.

" shrivelled penis , she said.

SAML said he's going to make them, asked for a bit more details like measurements, so we'll see how he goes.

Yes please... I need a break from asking folks in China for glass stuff! Be sure to detail every little thing (including glass thickness) or they WILL get it wrong, LOL. I would go for a narrow tube made of thick glass. So that it is no wider (inside) than the end of the 14mm male joint if possible....

 

[InhaleExhale]

Sorry misfire reply. I don't like how thin the curve is where it drops, but maybe that's unimportant and considered.

 

[Haze Mister]

How about forgetting the tricky curves for now and jus' gettin the fucken thing done