Cheap High Quality Bubbler

[Shit Snacks]

None were clear glass and his feedback was a lot higher than many on DHGate.

The feedback is not accurate because I was not even able to leave some, there must have been many others who could not leave feedback as well, lots of feedback on pieces they don't have stock of I'm just saying they are shady liars... I've seen clear ones too, but yeah clicking on the link I saw a blue one anyway lol All good brother! (fuck newpipes)

 

[Abele Rizieri Ferrari]

I bought from them once as well (just an adapter). The product came no problem, but the listing was kind of ambiguous as to how many items they'd ship (from their choice of words and the way they listed it it was reasonable to expect it'd be two items, but the price made me expect it was gonna be one). Not great. And snack's experoence of course horrible.

Makes me think of how seller2019 scammed me and misused the dispute and mediation system to fuck me over. Also very disappointed in dhgate in this matter by the way, they were unfairly seller favoring, a seller who was calling me malignant in their communication with dhgate even.

 

[LesPlenty]

Makes me think of how seller2019 scammed me and misused the dispute and mediation system to fuck me over. Also very disappointed in dhgate in this matter by the way, they were unfairly seller favoring, a seller who was calling me malignant in their communication with dhgate even.

I will try to remember to not use them again (newpipes) and have been getting more stuff from Aliexpress lately due to PayPal protection, just not much in the way of bongs to choose from.

 

[canj00digit?]

Meanwhile I am chatting with samL on reddit, they'll modify the TAG knock off so it is a different enough piece, talking about new versions of FC-MOD among others like UFO variations (anything off their stock)

Great job working with them on knocking off that piece.
I am definitely keeping an eye out here for when it pops up.
It's very close to a perfect format for me and I'm a picky bastard after all these years vaping through glass.

I considered the TAG but I'm international and once you add that lofty shipping cost it brings the total in $AU to damn near what I paid for my American pieces back in the day.... about what I paid for my Mobius ION Matrix which is the only surviving, unbroken piece of my collection (I have 4 animals ugh). My now dead 75mm Dirty Rico bubbler war roughly that price also. Throw in there a dead Slugworth downline, a dead Envy Glass bubbler, and a dead (but revivable) Mobius Stereo Matrix bubbler... it's broken at mouthpiece and repairable but its been impossible to find someone in the country willing to do it.

As you see I'm kinda over spending so much on glass cause in my world it's likely doomed eventually lol.

But that ION Matrix is tough as fuck... it's taken possibly even more knocks than the dead pieces combined.

 

[domo]

Hi guys, what's the best hand-held dry piece for the Tinymight 2?

The 9" TAG Showerhead Donut has the most appealing joint spacing with a visible chamber to watch it milk, but it's too big.
The Prophet seems like the best dry solution, but the mp joint height is too high for my liking and it looks slightly tippy.
J-hooks don't have a chamber to milk, don't look comfortable to hold, and can't really be set down.

I'm at a loss and don't know where else to look.

 

[Grass Yes]

Hi guys, what's the best hand-held dry piece for the Tinymight 2?

The 9" TAG Showerhead Donut has the most appealing joint spacing with a visible chamber to watch it milk, but it's too big.
The Prophet seems like the best dry solution, but the mp joint height is too high for my liking and it looks slightly tippy.
J-hooks don't have a chamber to milk, don't look comfortable to hold, and can't really be set down.

I'm at a loss and don't know where else to look.

I am a little confused about what size you want. If you are holding it in your hand, I don't see much worry about the Prophet tipping. Also, I don't find it tippy, but YMMV.

I like my little Straight Fab from Calibear. It's little but can hold quite a hit:

STRAIGHT FAB V2

Calibear Glass pay more attention to every details and only select the best ones. Flower of Life Function the best and most smoothest bubble. You will get milky flavor easily. Specification: 8 inch in height 14.5mm joint It will come with a free quartz banger.

calibearglass.com

 

[Shit Snacks]

Hi guys, what's the best hand-held dry piece for the Tinymight 2?

The 9" TAG Showerhead Donut has the most appealing joint spacing with a visible chamber to watch it milk, but it's too big.
The Prophet seems like the best dry solution, but the mp joint height is too high for my liking and it looks slightly tippy.
J-hooks don't have a chamber to milk, don't look comfortable to hold, and can't really be set down.

I'm at a loss and don't know where else to look.

I don't see much value in filling a large empty chamber, specifically for the TM though what you want is a more complex chamber, if you search for my posts and the word Swiss, I think I actually shared more recently in another glass thread, there is a right angle Swiss rig that I absolutely love to use dry with my TM among others, I find it to work even better than the prophet for me and the prophet is fucking phenomenal (you could always try to use it in reverse and see how the form factor works for you since it is pretty unique for a dry rig, the original w hook!) Alternatively the new protege is a Swiss rig and actually does work quite well dry although the frit disc is not ideal dry it is still effective... Otherwise yeah other Swiss rigs, or a rig with spikes, although more of those tend to be straight tubes, so depends on the form factor you want as well... I agree that an egg specifically like the straight fab is also a fantastic dry rig and there are quite a few to choose from (Gili Glass version has such wide open air flow that I'm not sure it's the most ideal dry I think the CB version is a bit better for that and it is a little smaller although it has the nicer perk which is best for water... Hope this helps!

 

[domo]

I don't see much value in filling a large empty chamber, specifically for the TM though what you want is a more complex chamber, if you search for my posts and the word Swiss, I think I actually shared more recently in another glass thread, there is a right angle Swiss rig that I absolutely love to use dry with my TM among others, I find it to work even better than the prophet for me and the prophet is fucking phenomenal (you could always try to use it in reverse and see how the form factor works for you since it is pretty unique for a dry rig, the original w hook!) Alternatively the new protege is a Swiss rig and actually does work quite well dry although the frit disc is not ideal dry it is still effective... Otherwise yeah other Swiss rigs, or a rig with spikes, although more of those tend to be straight tubes, so depends on the form factor you want as well... I agree that an egg specifically like the straight fab is also a fantastic dry rig and there are quite a few to choose from (Gili Glass version has such wide open air flow that I'm not sure it's the most ideal dry I think the CB version is a bit better for that and it is a little smaller although it has the nicer perk which is best for water... Hope this helps!

Very helpful! I'm still looking for joint placement similar to the TAG piece or the Protege, so the GG or CB versions won't work for me.

 

[redrum891]

curious question, I see a lot of people have resin filled drop down adapters not being cleaned much, do you guys just take the adapter and soak a little in iso for reclaim?

not sure if I want a drop down adapter, would be nice to catch any material too, but i clean my bong just about every day.

 

[coolbreeze]

curious question, I see a lot of people have resin filled drop down adapters not being cleaned much, do you guys just take the adapter and soak a little in iso for reclaim?

not sure if I want a drop down adapter, would be nice to catch any material too, but i clean my bong just about every day.

Letting it get dirty helps keep the future goo from getting through. At least, that was the recommendation with the dry catch I use. It definitely helps to keep the piece clean in any case. That doesn't mean you shouldn't enjoy the reclaim, though, every once in awhile.

 

[Shit Snacks]

Very helpful! I'm still looking for joint placement similar to the TAG piece or the Protege, so the GG or CB versions won't work for me.

Yeah like I said if you need that shape, modular mouthpiece, shorter, your options are much more limited... You should just grab a protege honestly then, if you think you don't like prophet (note there is also a new version with wider base if you check his thread now)

curious question, I see a lot of people have resin filled drop down adapters not being cleaned much, do you guys just take the adapter and soak a little in iso for reclaim?

The adapter is catching all the herbal particulates, it is not simply clean reclaim oil, but trying to make iso reclaim is pretty disgusting anyway (tried it long ago)

I clean my adapters when they get really coated, more dirty and sticky, particularly if I am noticing the taste, if they saw too many high temp hits took through them etc. And I do it with my round of rig cleaning to keep for using the same alcohol for many pieces (yes the adapters require a bit more of a soak n scrub though they still clean quick)

not sure if I want a drop down adapter, would be nice to catch any material too, but i clean my bong just about every day.

Yeah, they allow me to avoid cleaning everyday, especially as I have multiple glass pieces in rotation, I will empty and clean the glass before the adapters as they get dirtier and I keep the glass cleaner... Part of the strategy is also using distilled water only inside since the water here is so hard... Would be ideal if I could also rinse with distilled water but that's too involved for me!

Again, the other benefits of dropdown adapters, are they change the form factor, letting your vape sit lower in the rig and off to the side potentially or further out front... They also allow you to switch sizes easily if you have dropdown adapters in every size combination... Finally they offer additional cooling with some right angle pathway (related to the particle catching keeping the water cleaner benefit)

@coolbreeze: Letting it get dirty helps keep the future goo from getting through. At least, that was the recommendation with the dry catch I use. It definitely helps to keep the piece clean in any case. That doesn't mean you shouldn't enjoy the reclaim, though, every once in awhile.

Oh, yeah, if I have a freshly cleaned adapter, I tried to first use it on a glass piece that has not been cleaned and set up with fresh water yet, I will first try to use it on one of the dirtier pieces, so any particulates that get through without sticking to oil will be cleaned from the water soon anyway lol

 

[Grass Yes]

Very helpful! I'm still looking for joint placement similar to the TAG piece or the Protege, so the GG or CB versions won't work for me.

I am not sure what you mean. Is the joint at the wrong height? The TAG donut and the straight fab have almost the same joint?

The Protege is pretty different in my opinion, but totally worth getting if that is what you are looking for. I'm still getting to know mine but I like it a lot. I haven't tried it dry yet, and it works best for me with a lot of water. So if you are looking for a small volume, that is larger than I might expect from your earlier post.

curious question, I see a lot of people have resin filled drop down adapters not being cleaned much, do you guys just take the adapter and soak a little in iso for reclaim?

not sure if I want a drop down adapter, would be nice to catch any material too, but i clean my bong just about every day.

I like a dry catch for keeping things clean, but I actually typically use my drop-downs to fit my various vapes. I like them away from my face, especially the hot coils. To clean, I typically just use some ISO and shake them, just like you said.

 

[Shit Snacks]

I am not sure what you mean. Is the joint at the wrong height? The TAG donut and the straight fab have almost the same joint?

The Protege is pretty different in my opinion, but totally worth getting if that is what you are looking for. I'm still getting to know mine but I like it a lot. I haven't tried it dry yet, and it works best for me with a lot of water. So if you are looking for a small volume, that is larger than I might expect from your earlier post.

I think they mean they want the short fat can, probably modular mouthpiece too? What you say about the Protege is true, but I did try mine dry, and it does work well although I prefer my other Swiss rig for that as I said yes because of the volume and the perc but I also like that it is all one piece in the other form factor for that use

 

[Grass Yes]

I think they mean they want the short fat can, probably modular mouthpiece too?

Interesting. Lots of short fat cans on TAG's site, but not any with modular MPs, that I see. Drag.

What you say about the Protege is true, but I did try mine dry, and it does work well although I prefer my other Swiss rig for that as I said yes because of the volume and the perc but I also like that it is all one piece in the other form factor for that use

This one?

Ugh that seller bridemarry did ship my order quick, and tracking is moving, but I am hoping it is actually the right item, if you click the link above it now has a bunch of different colored glass rigs to choose from, it no longer has the rig below which is what I ordered and sure as hell hope shows up!

I hate when sellers do that, it makes it so I cannot post a review on this piece there, since instead of listing it as out of stock they swapped in a completely different item... It also means no one else can ever acquire the item I will be talking about and posting my own photos of lol Yeah it's happened to me before, an items that I already left reviews on, I think that's why they do it, the sellers on DHgate so they can keep my great review, even though it is not a review of that item...

Shame about the seller screwing up the listing.

 

[Shit Snacks]

Interesting. Lots of short fat cans on TAG's site, but not any with modular MPs, that I see. Drag.

Oh, I mean I think the point is that they want the mouthpiece separate from the can, not on top, because they want to watch the vapor fill, more orb style, but dry..? Which honestly Prophet is perfect for lol

This one?

Yeah, that was it, there is a variation of it available on eBay and another from yhookah on DHgate

Shame about the seller screwing up the listing.

Oh, well they don't sell the piece anymore, it's just lucky that they actually had one for me I guess? It is annoying when they swap the listing, that is what sellers often do and sometimes you see old reviews with photos of the wrong thing, luckily I think I posted my review after they had already swapped the listing so I was able to clarify in my posting

 

[Grass Yes]

Oh, I mean I think the point is that they want the mouthpiece separate from the can, not on top, because they want to watch the vapor fill, more orb style, but dry..? Which honestly Prophet is perfect for lol

Yep you just described the Prophet to me

As to the rest, I find the shopping experience on dhgate super confusing which I why I follow this thread. So the item listing changing to a totally different piece is another in a long list of things that confuse me on that marketplace. Also I probably should just adapt to it. But instead I let Calibear, TAG, etc curate the glass for me. And y'all of course.

 

[Abele Rizieri Ferrari]

Sounds like Prophet. Have a look at the different mp's as well as you might prefer one to be able to have a beter view of the vapor filling the chamber

 

[domo]

Sounds like Prophet. Have a look at the different mp's as well as you might prefer one to be able to have a beter view of the vapor filling the chamber

The Prophet doesn’t tick enough boxes for me, although the new one with the wider base is getting there.

Yeah like I said if you need that shape, modular mouthpiece, shorter, your options are much more limited... You should just grab a protege honestly then, if you think you don't like prophet (note there is also a new version with wider base if you check his thread now)

My only piece broke--a shitty honeycomb rig--so I wanted to start my collection with a convenient dry piece, but it doesn’t look like that’ll happen just yet.

Going to have adjust my routine and setup a bit, but the Protege w/ drop down should serve me well for the time-being

 

[Abele Rizieri Ferrari]

Consider a nice j hook

 

[LesPlenty]

Consider a nice j hook

I saw a water pipe posted but could not find it that was similar to a D020 but had a spiral in the can to the perc that might work well dry, anyone remember it?

 

[Shit Snacks]

I saw a water pipe posted but could not find it that was similar to a D020 but had a spiral in the can to the perc that might work well dry, anyone remember it?

I think that was in here if we skim back?

 

[Grass Yes]

I saw a water pipe posted but could not find it that was similar to a D020 but had a spiral in the can to the perc that might work well dry, anyone remember it?

I think that was in here if we skim back?

This is the closest thing it could find to that description in the past year.

What might be the drawbacks to a piece like this? assuming all the joints are nice and tight, and the perc slits fire evenly?

 

[LesPlenty]

I think that was in here if we skim back?

I went back a couple of dozen pages but could not find it as I was looking for the picture.

This is the closest thing it could find to that description in the past year.

Well done! That is the one I was talking about.

11 Inchs Recycler Bong Hookahs Smoking Pipe Water Bongs Heady Dab Rigs Waterpipe Oil Rigs With 14mm Ash Catcher From Hiiseller, $13.21 | DHgate.Com

Find great deals for 11 inchs recycler bong hookahs smoking pipe water bongs heady dab rigs waterpipe oil rigs with 14mm ash catcher in hookahs on DHgate- top dropshipping companies. Shop with confidence here.

www.dhgate.com

Might work well dry?

 

[redrum891]

I went back a couple of dozen pages but could not find it as I was looking for the picture.

Well done! That is the one I was talking about.

11 Inchs Recycler Bong Hookahs Smoking Pipe Water Bongs Heady Dab Rigs Waterpipe Oil Rigs With 14mm Ash Catcher From Hiiseller, $13.21 | DHgate.Com

Find great deals for 11 inchs recycler bong hookahs smoking pipe water bongs heady dab rigs waterpipe oil rigs with 14mm ash catcher in hookahs on DHgate- top dropshipping companies. Shop with confidence here.

www.dhgate.com

Might work well dry?

wish.com sells these for cheaper iirc, i posted this a while back.

i think there are some in stock from usa seller too, cause i considered grabbing one. if you keep looking you might see it. not 100% sure though

11inchs Freezable Coil Glass Bubbler Recycler Dab Rig Smoking Glass Water Pipes Hookahs | Wish

Buy 11inchs Freezable Coil Glass Bubbler Recycler Dab Rig Smoking Glass Water Pipes Hookahs at Wish | Shop and Save

www.wish.com

 

[redrum891]

Glass Bong Hookah Rig/Bubbler For Smoking Bong 13inch Height With 19mm Female And Bowl 680g Weight BU077 From Jcglassshop, $42.26 | DHgate.Com

Find great deals for glass bong hookah rig/bubbler for smoking bong 13inch height with 19mm female and bowl 680g weight bu077 in hookahs on DHgate- top dropshipping companies. Shop with confidence here.

www.dhgate.com

damn, this is cheaper than the gilliglass. kinda wish the ending of the mouthpiece was different. Gilliglass works perfect but also has a pretty wide neck on it. wondering how a smaller one would feel and the higher fab egg mounted.