Cheap High Quality Bubbler

jbm

Well-Known Member
I’m back to my Aqua Lab mp on my TAG donut. I like the longer mp’s, but I’ve broken several 45 adapters already, it’s a precarious setup for me. (I’m clumsier than most)
I like that aqua lab MP, though I find I use a lamart whip with the donut most of the time. What other MPs for the TAG donut (still my fave glass piece) do people like?
 

coolbreeze

Well-Known Member
Glad I’m not alone of not needing any additional bowls lol. Running out of room to store them.
I'd trade all mine for one or two more of the B. Wilson martini slides, those are awesome with 18mm injectors.

I like that aqua lab MP, though I find I use a lamart whip with the donut most of the time. What other MPs for the TAG donut (still my fave glass piece) do people like?
I have a couple real nice ones from OGB, I use this with a m-m adapter: https://oregonglassblower.com/18mm-GLASS-MOUTHPIECE-FEMALE-35-INCH-18MP-3.htm and this by itself: https://oregonglassblower.com/18mm-GLASS-MOUTHPIECE-MALE-18mmp.htm , but mostly the Goo Roo three-piece MP or the whip.

That little one's a great MP for Flip bricks, etc.
 
Last edited:

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I like that aqua lab MP, though I find I use a lamart whip with the donut most of the time. What other MPs for the TAG donut (still my fave glass piece) do people like?

If you see my post on the previous page, that is a color GooRoo three-piece mouthpiece, with 45° angle adapter from allaccessary, I use similar adapters with Phineas coolers as mouthpieces for more compact profile and open air flow, if I didn't have so many of those I would have gotten a GVB mouthpiece too lol there's also a nice right angle spiked taper mouthpiece also available with flared version from Genesis Glass now... Agreed this piece does work really well with whips too! Been a while since I whipped one out, been meaning to again
 

Timps27

Feel like I’m winnin’ when I’m losin’ again
I am pretty careful especially after breaking my first goo mouthpiece knocking the whole rig over lol

This is the real kicker; I don’t mind breaking a 45 now and then, but every time it’s happened I go through a moment of panic hoping it’s not the Goo Roo mp that broke. Living in a hotel until I get a place down in AZ, then maybe once I get my new sesh spot set up I will grab a new 45 and try again.
 

chlorophyll_man

AVB Inspector
US made mouthpiece and dropdow
I love that drop down so much, is it the OGB one?
There aren't that many of that style around, especially ones that actually lower the joint. The ones on DHgate look like they don't lower the joint at all. @VapeFiend.com here in the UK sell them (well a mirror image lesser quality version) but the joints on those are poorly lined up so e.g. Anvil sits at a wonky angle. Functions but looks rubbish.
 
Last edited:

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I love that drop down so much, is it the OGB one?
There aren't that many of that style around, especially ones that actually lower the joint. The ones on DHgate look like they don't lower the joint at all. @VapeFiend.com here in the UK sell them (well a mirror image lesser quality version) but the joints on those are poorly lined up so e.g. Anvil sits at a wonky angle. Functions but looks rubbish.

No I've never seen one from OGB... That one is from Rick Bird Barry and it is quite expensive especially for color though they are large and really nice, you can follow him on Instagram to snag them... Genesis glass have a deeper drop down available now per my request although it's only 14-14 so I am waiting for them to make more sizes
 

Abele Rizieri Ferrari

Well-Known Member
TAG updated the listing for that modular piece that has been available for pre order but only showed a render. They made a colored versions and added some nice photos
F188-WPv-154T-2843PuA-LE.02.1_1_600x.jpg


For more detailed view check out the product page

 

Abele Rizieri Ferrari

Well-Known Member
Yeah the blue is nice. Is double the price of the clear one though

I was mailing with a TAG rep by the way and they were open to input for designing a new water piece. They'd need 30 pre orders before they do a production run, but if they do a render and put a listing online for pre order, I bet it won't take too long before those 30 are pre ordered. They would ship individually, so no hassle there.

If anyone got ideas to share, let me know. I was going through their catalog and they've got lots of nice pieces already, especially the not so complex ones which I prefer. So I am pretty much drawing blanks here. Besides that modular piece, I like their inline bent neck pieces a lot, but they got many variaties of that already. They also have pieces with dewar joint to the downstem, which can be an interesting starting point as well.

Let me know if you have any ideas
 

GratefulDread

Well-Known Member
b2cvape on AliExpress is having an "event" (sale).
Nothing crazy but I thought I'd post it anyway.
Anyone tried their rubies? Bad idea?
Edit: Apparently not much of a sale at all. I should have known with aliexpress...
 
Last edited:
GratefulDread,

LesPlenty

Well-Known Member
Company Rep
Anyone tried their rubies? Bad idea?
I cannot see any difference between the B2c rubies from my more expensive ones. I measured quite a few and they were all very close in OD.
is having an "event" (sale).
I just purchased their new Ti adjustable bowl a few days ago and just checked their sale price...it is now more expensive by a few dollars!
 

Grass Yes

Yes
Staff member
Whelp I thought I was done with BF sales but I picked up this TAG bellow UFO:

Got a factory second with the cyber35 discount for $60 shipped. The MP is not my favorite but I figured it was worth a try at that price.
I have had this Tag Super Slit Bellow UFO for a bit. At first I regretted it. I thought it was too big and it had pretty serious blowback. But now I really dig it. It is fun to fill, and nice to hit. No the most flavorful glass that I own, but doesn't steal too much. I tamed the blowback with good coordination on a pass-through carb and a low water level. I think putting in just enough water to cover the slits is what did it. Now I can sleep on the carb a little and still avoid a duff storm.
ufo.jpg

It says it is a second, but I can't find any flaw. I do like the perc on it a lot and I think I would buy another piece with it. Looks like with the current BREAK-35 code, you can still get it for $60.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I have had this Tag Super Slit Bellow UFO for a bit. At first I regretted it. I thought it was too big and it had pretty serious blowback. But now I really dig it. It is fun to fill, and nice to hit. No the most flavorful glass that I own, but doesn't steal too much. I tamed the blowback with good coordination on a pass-through carb and a low water level. I think putting in just enough water to cover the slits is what did it. Now I can sleep on the carb a little and still avoid a duff storm.
ufo.jpg

It says it is a second, but I can't find any flaw. I do like the perc on it a lot and I think I would buy another piece with it. Looks like with the current BREAK-35 code, you can still get it for $60.

Nice, yeah it is really a basic shower head, in the mushroom shape style which is usually when the perc is in the neck or tube, it just has so many slits so yeah that way with a lot of water blow back more at risk more at risk
 

Grass Yes

Yes
Staff member
Nice, yeah it is just a basic shower head, in the mushroom shape style which is usually when the perc is in the neck or tube, it just has so many slits so yeah that way with a lot of water blow back is a result of this shape too?
Yeah, that's all I can figure is that the mushroom causes the blowback. I actually prefer it will less water anyway, so I guess it was probably designed that way.
 

redrum891

Well-Known Member
Nice, yeah it is really a basic shower head, in the mushroom shape style which is usually when the perc is in the neck or tube, it just has so many slits so yeah that way with a lot of water blow back more at risk more at risk
hey, I'm making a custom wood to put my tools / bowls / etc

mind taking a picture of yours? I'm debating on making 2 layers for holding glass slides / q-tips / and maybe buy an iso station to add into it or maybe a simple small vile with iso in it.

I'm sure you probably have a had a lot more time make a nice little station, if you don't mind me ripping off some of ya ideas xD. I only have my heat post screwed in atm. sorry if im off topic on the glass thread.

meant @Grass Yes
 
redrum891,
  • Like
Reactions: Grass Yes

Grass Yes

Yes
Staff member
hey, I'm making a custom wood to put my tools / bowls / etc

mind taking a picture of yours? I'm debating on making 2 layers for holding glass slides / q-tips / and maybe buy an iso station to add into it or maybe a simple small vile with iso in it.

I'm sure you probably have a had a lot more time make a nice little station, if you don't mind me ripping off some of ya ideas xD. I only have my heat post screwed in atm. sorry if im off topic on the glass thread.

meant @Grass Yes
It's really great but I can take no credit. It was made by @Timberhead ( https://timberheaddesigns.com/ ).
I won it in the Ed's raffle this year:
I feel so very lucky to have won a FP B1 setup from Ed's TNT MAW raffle. It is absolutely gorgeous and I am warming it up now. Thanks to @Timberhead , @VGOODIEZ and of course, @Ed's TnT .
PXL-20221209-001646399-2.jpg


I have followed this thread for a while but I would love to know people's recommended starting temp for flavorful hits on the B1 with the Auber RDK 300B.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
hey, I'm making a custom wood to put my tools / bowls / etc

mind taking a picture of yours? I'm debating on making 2 layers for holding glass slides / q-tips / and maybe buy an iso station to add into it or maybe a simple small vile with iso in it.

I'm sure you probably have a had a lot more time make a nice little station, if you don't mind me ripping off some of ya ideas xD. I only have my heat post screwed in atm. sorry if im off topic on the glass thread.

meant @Grass Yes

Sorry, I don't make any woodwork nor do I actually have anything like this myself... I believe there were some other threads about them here though, aside from timber head I think someone else makes them, Jcat?
 

LesPlenty

Well-Known Member
Company Rep
It seems well built, a bit restrictive so I may try it with a baller next.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
It seems well built, a bit restrictive so I may try it with a baller next.

So newpipes actually shipped something?? You can find the same piece from a variety of other sellers (I had the one from Radiant Glass aka bonglas) and I can't stress enough that no one should buy anything from newpipes even if they did actually come through for this one, they are scumbags who list stuff they do not have in stock and do not inform the customer, stringing them along until dispute time expires and funds get released automatically... :2c::tup:

Meanwhile I found some seemingly US heady glass at a very cheap price:
basic tiny little ball rig...

Also don't forget you can message Curated Flame through Instagram to order anything you see there, like these:
Screenshot-20230109-141643.png

Nice looking klein recycler (with the outer uptake tube but incycler style drain and fountain perc) style that I really like...
Screenshot-20230106-115019.png

And showerhead to honeycomb perc bong tube...
Screenshot-20230106-115033.png

Plus this interesting inline bong with dual uptake (downtake?) to the perc sort of...
 
Top Bottom