Cheap High Quality Bubbler

[Frederick McGuire]

If you're using te 7th floor WPA, then you want a female inlet, and you most definitely have to hold it.

If you're using an adapter with a screen in it, so long a it has an 18mm male to fit in the LSV, the other fitting can be anything, so it doesn't entirely matter what the inlet of the bong is.
You don't necessarily have to hold the LSV when using an adapter as WPA, but I'd still highly advise it.

 

[Korben]

I have recently secured a way to consistently get wax. I was like to find a good piece I can use for wax occasionally and then use it with my vaporizers as well. I was really considering a Recycler but I can never fine a quality one in stock.

mod note: Threads merged.

 

[Meghan]

I picked up the AliEx glass hammer pipe and am actually SUPER happy and impressed. I'm using it with my domeless titanum nail that's 14/18mm compatible (the pipe has a 14mm joint), and it's a pretty perfect combination. For $16.50 shipped, this is an amazing piece. I just ordered two more (one for a friend, one more as a backup for myself).

I've ordered an adapter so I can use my Lotus with it, too. I can't wait!

http://www.aliexpress.com/item/New-...n-glass-bubbler-Free-shipping/1479280724.html

 

[SSVUN~YAH]

Nice! I've been looking at that same piece for a few weeks now. I want to pair it with the lotus as well. Looking forward to the review when your adapter arrives, thanks!

 

[BLAZING OG]

Any one have a link of a king stemline (sovereignty knock off's), Some one posted on from the brothers with glass site which i love but I want something thast closer to 18 inches or less, the brothers with glass one is approx 12 inches.
Any help would be appreciated!!!

 

[olivianewtonjohn]

Any one have a link of a king stemline (sovereignty knock off's), Some one posted on from the brothers with glass site which i love but I want something thast closer to 18 inches or less, the brothers with glass one is approx 12 inches.
Any help would be appreciated!!!

I believe your looking for jhan; he has a thread here and a store on ioffer. Many different versions of the stemline

EDIT:

http://fuckcombustion.com/threads/aeon-glass-by-jhanpixel.7673/

http://www.ioffer.com/i/18-king-size-stemline-stemless-water-pipe-boro-glass-520017117

 

[BLAZING OG]

I believe your looking for jhan; he has a thread here and a store on ioffer. Many different versions of the stemline

EDIT:

http://fuckcombustion.com/threads/aeon-glass-by-jhanpixel.7673/

http://www.ioffer.com/i/18-king-size-stemline-stemless-water-pipe-boro-glass-520017117

Sweet my man, thanks for the fast reply!
This works out even better if they can do simple but yet custom work.
Thank you!!!!

Edit
Just found DG clone/replica

http://max-quality-glass.myshopify....fritted-disc-apparatus-oil-rig-and-water-pipe

 

[TwoPageAfro]

Check out this thread on cheap, high quality glass. I think you'll like the stuff from badassglass and aliexpress.

 

[SD_haze]

As long as it's not too big, just about any glass piece can be multi-purpose for wax + vaporizers.

Some oil setups require a male GonG joint, some require a female GonG joint.
Most vaporizers require a female GonG joint.

You can convert any male GonG joint to female,
or any female GonG joint to male,
with a $5-$20 adapter.

Link posted above is pretty comprehensive, unless your price range was above "cheap". Which if you are seeking quality recyclers..sounds like it might be?

 

[b0]

Just found DG clone/replica

http://max-quality-glass.myshopify....fritted-disc-apparatus-oil-rig-and-water-pipe

That guy sells the same chinese pieces from aliexpres but for a lot more. Hope to see soon that DG clone in Ali for a cheaper price, will buy it for sure

 

[clouded vision]

A budget would definitely help narrow it down for you. I have seen recyclers from $60 (probably crap but I could link it if you want) up to thousands. it all depends what you want and how much you want to spend.

edit: this is in response to @Korben before his/her thread was merged into here

 

[SD_haze]

A budget would definitely help narrow it down for you. I have seen recyclers from $60 (probably crap but I could link it if you want) up to thousands. it all depends what you want and how much you want to spend.

edit: this is in response to @Korben before his/her thread was merged into here

Hmm, looks like the thread's responses were merged but his question wasn't?
edit: nevermind posts just weren't back-to-back

 

[hanfhead]

Hmm, looks like the thread's responses were merged but his question wasn't?

It was. Look up further. The thread still follows the timestamps so there are questions in-between. Also looks like the replies linking to this thread were removed.

 

[canj00digit?]

Any one have a link of a king stemline (sovereignty knock off's), Some one posted on from the brothers with glass site which i love but I want something thast closer to 18 inches or less, the brothers with glass one is approx 12 inches.
Any help would be appreciated!!!

I think that might have been me that posted the SOV clones from BWG.
BTW, my stemline is actually 14" so they vary. It's similar to the mini-kings.

Keep in mind that jhanpixel's stemlines aren't gridded like the SOV King Stemlines or the clones.

Apix has an 18.5" gridded stemline staight tube on his site for bargain of $195.
His work is very good, as good as many of the high end brands, and he uses quality (Simax I think) boro.
http://apixdesign.com/collections/frontpage/products/18-5-50mm-gridded-stemline-with-opals

 

[BLAZING OG]

I think that might have been me that posted the SOV clones from BWG.
BTW, my stemline is actually 14" so they vary. It's similar to the mini-kings.

Keep in mind that jhanpixel's stemlines aren't gridded like the SOV King Stemlines or the clones.

Apix has an 18.5" gridded stemline staight tube on his site for bargain of $195.
His work is very good, as good as many of the high end brands, and he uses quality (Simax I think) boro.
http://apixdesign.com/collections/frontpage/products/18-5-50mm-gridded-stemline-with-opals

you read my mind, I wanted a king stemline like jhanpixel but like you mentioned I want gridded.
thanks for your suggestions, 14 in for the brothers with glass piece is not as bad as I thought.

 

[hanfhead]

Mine since the 18nd, I can't wait either ! I hope it's en route and not stuck, sometimes it seems like that when they don't update the tracking.

fyi. I signed up for notifications on usps if there were any updates and just got a tracking notification from a state away. Hopefully yours is close, too.

 

[canj00digit?]

you read my mind, I wanted a king stemline like jhanpixel but like you mentioned I want gridded.
thanks for your suggestions, 14 in for the brothers with glass piece is not as bad as I thought.

No worries.
Yeah that BWG piece is cheapest gridded stemline I've ever seen... and it's Schott glass on top of that.
Awesome bargain.

You don't see gridded stemlines + cheap together often because gridding is a time intensive process compared to just cutting slits.

 

[clouded vision]

If you look at jhanpixel's stemline, it isn't gridded in the traditional sense but he puts slits on both sides so it should still have similar diffusion to a gridded stem.

I do have to say though I am very impressed with the pictures of the BWG gridded stem. very clean gridding,just as clean as my actual sov gridded mini king. None of the clones have as many slits as the real thing and they all appear to be a 65mm can instead of 75mm but for $150-$250 less, you really can't go wrong.

 

[deadheadbill]

I got the $25 DHgate bub today, it's pretty nice, has a good weight to it, wide base, nice welds and gives a decent perc.

Got mine in yesterday. The accessories are more like an after thought, but that is ok because the bub itself is pretty tight. I always thought I wanted big glass, but these smaller pieces have been treating me really well.

 

[Roger D]

fyi. I signed up for notifications on usps if there were any updates and just got a tracking notification from a state away. Hopefully yours is close, too.

Look back ! I got it a couple days ago http://fuckcombustion.com/threads/cheap-high-quality-bubbler.5255/page-106#post-501156

Wish you get yours soon !

 

[canj00digit?]

If you look at jhanpixel's stemline, it isn't gridded in the traditional sense but he puts slits on both sides so it should still have similar diffusion to a gridded stem.

I do have to say though I am very impressed with the pictures of the BWG gridded stem. very clean gridding,just as clean as my actual sov gridded mini king. None of the clones have as many slits as the real thing and they all appear to be a 65mm can instead of 75mm but for $150-$250 less, you really can't go wrong.

The BWG upline is only 60mm can actually. And, like you said, has less slits than the SOV. Mine has 7.
But like you said, considering the price, and quality german boro, it's hard to go wrong.

BTW, the reason it's so clean and looks so similar to SOV is the initial run (one I have) was done by an ex-SOV employee in his new shop. He decided he couldn't sell them under his new label (one that you'd probably recognize but I aint saying) because they were too close to SOVs and feared problems. But they sold out the back door so well that this guy's apprentices started turning them out and even expanded the range. lol. But they remain unbranded and somewhat of a hush hush issue because I was told not to repeat this in public forums. hehe. Meh. Whatever. I didn't name any names.

During BWG's BF sale I bought one of the 12" dual chamber pieces. Gridded downline-to-circ(they call ufo). Schott glass. $125. It's only a mini-tube being short and 50mm can. But it's so damn smooth, I absolutely LOVE it and have picked it up before either of my Mobius' on more than one occasion.

Good value tubes.

 

[BLAZING OG]

I agree, might have to pull the trigger on the bwg.
Thank you!
Scott glass, oh iam in!

No worries.
Yeah that BWG piece is cheapest gridded stemline I've ever seen... and it's Schott glass on top of that.
Awesome bargain.

You don't see gridded stemlines + cheap together often because gridding is a time intensive process compared to just cutting slits.

 

[hanfhead]

Look back ! I got it a couple days ago http://fuckcombustion.com/threads/cheap-high-quality-bubbler.5255/page-106#post-501156

Wish you get yours soon !

haha whoops I do remember seeing those pics!

Well then, here's to hoping I join the club tomorrow

 

[brucebannor]

The size makes them feel very different. My Mini King Stemline has 18-slits (9 per side) and the AG upline has 10 slits (gridded to 5 holes each) both are 18mm. Notice the difference in the ground joint thickness. Despite being thin, the AG piece seems very well made, quality-wise it's great and I can't find a bubble even when being picky. Just got the upline but I'd still feel safer with the beast on the right.

 

[BLAZING OG]

The size makes them feel very different. My Mini King Stemline has 18-slits (9 per side) and the AG upline has 10 slits (gridded to 5 holes each) both are 18mm. Notice the difference in the ground joint thickness. Despite being thin, the AG piece seems very well made, quality-wise it's great and I can't find a bubble even when being picky. Just got the upline but I'd still feel safer with the beast on the right.

Nice comparison, so the one on the right is the AG from BWG, and the one on the left is a jhanpixel?
How do they feel on the percolation tip? Do they stack bubbles?
Thanks !!!!
I just emailed BWG to see if they can offer me a 15-16 inch version of there AG up perc with an 18mm Female joint , we will see what answer I get. I also hit up jhan pixel to ask if they offer there 18" king size stemline in a gridded inline perc!!