Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
You don't want it too fluffy or uneven or more air will flow through the less dense areas, less through more dense where more of your material is, leading to uneven cooking.
My pinkie fits perfectly inside the shovelhead so I just gently level it out so it sits at an even depth across the screen. 2 hits to clear no stirring required.
My pinkie fits perfectly inside the shovelhead so I just gently level it out so it sits at an even depth across the screen. 2 hits to clear no stirring required.
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
The Stray Fox
Separated from the group
Two heaping smidgen 1/32 tsp scoops, maybe I shake the bowl to level it out, that’s it.
The Stray Fox
Separated from the group
Finally found a LolliCap to add to my collection. I love the feel of this one. Perfect for dabbing.
My favorite one is the 4 hole VRod cap. I run my PID at 575 and just leave it on all the time. The added heated mass sitting on top of the head makes for powerful low temp hits. It’s not the same if I only have the cap on for just the hit. The VRod cap is cupped and hugs the head like a ball cap. I would not recommend doing this with the universal carb cap.
My favorite one is the 4 hole VRod cap. I run my PID at 575 and just leave it on all the time. The added heated mass sitting on top of the head makes for powerful low temp hits. It’s not the same if I only have the cap on for just the hit. The VRod cap is cupped and hugs the head like a ball cap. I would not recommend doing this with the universal carb cap.
snackmaster
Well-Known Member
Uh oh, why not? I was doing that over the weekend…
The Stray Fox
Separated from the group
I suppose you could, you’re right. The tippiness and where it’s going to land is the fear and worry. Two feeling I try to avoid when relaxing.
The VRod cap is so nice. I wish everyone could experience it. I also really like their DCup cap because it also is specifically designed to be used only with the DCup. It’s specialized not universalized.
I like your technique you are using. Usually people seem to think I’m crazy for leaving my carb on my VRod all the time or for even using a carb at all. Are you running lower temps or just looking for faster extraction?
snackmaster
Well-Known Member
A little of both I guess. Still figuring out the vrod but for flower I liked 585 with the carb cap. I didn’t wanna scorch the wood so I took the handle off completely and it felt reasonably secure. Not something I’d try with the weedeater.
Chicken No Name
Dazed and confused
This is interesting and something I've been experimenting with.
Running vrod at around 600 to 610 on pid.
Universal carb cap placed on for about 20 secs. Draw taken but cap left on. Tasty. Second draw cap left on. Tasty. Final draw and cap taken off to clear.
I find leaving cap on and not clearing every draw keeps the taste sweeter for some reason..... This was discovered when I forgot to remove cap after every draw and clearing the chamber....
Take what you mean re universal not.bring stable. Are the dedicated vrod caps still available?
Running vrod at around 600 to 610 on pid.
Universal carb cap placed on for about 20 secs. Draw taken but cap left on. Tasty. Second draw cap left on. Tasty. Final draw and cap taken off to clear.
I find leaving cap on and not clearing every draw keeps the taste sweeter for some reason..... This was discovered when I forgot to remove cap after every draw and clearing the chamber....
Take what you mean re universal not.bring stable. Are the dedicated vrod caps still available?
710yota
Have you heard about the boom on Mizar 5?
I've also recently got into leaving my Vrod cap on all the time along with a few terp pearls and am def starting to prefer it vs uncapped or just having the cap on when I take a hit. Shit milks up fast, I'm getting as strong of hits at 666f as I was running in the high rollers club at 700f 
I am super glad I picked up my unit early on enough to get the OG Vrod cap but am very jealous of that 4 hole cap. Some of the discontinued carb cap varieties would be a pretty sweet limited run item for CH to do just like they did with the AVB cans a while back.
I am super glad I picked up my unit early on enough to get the OG Vrod cap but am very jealous of that 4 hole cap. Some of the discontinued carb cap varieties would be a pretty sweet limited run item for CH to do just like they did with the AVB cans a while back.
Chicken No Name
Dazed and confused
FlowerPot VRod Carb Cap (3137)
A Carb Cap and Dabber for the FlowerPot VRod Designed For V Rod and 28mm dishes Dabber Attaches Vertically or Horizontally Grade 2 Titanium Made In The USA Includes a titanium scoop dabber.
Which one is this....?
And this
Dabber et son carb cap NewVape, parfait pour le flowerpot ou autre.
le dabber en titane et son carb cap fabriqué par NewVape vous permettent de dabber avec classe. Diamètre 22mm, compatible avec la plupart des bangers.
710yota
Have you heard about the boom on Mizar 5?
FlowerPot VRod Carb Cap (3137)
A Carb Cap and Dabber for the FlowerPot VRod Designed For V Rod and 28mm dishes Dabber Attaches Vertically or Horizontally Grade 2 Titanium Made In The USA Includes a titanium scoop dabber.vapefiend.co.uk
Which one is this....?
And this
Dabber et son carb cap NewVape, parfait pour le flowerpot ou autre.
le dabber en titane et son carb cap fabriqué par NewVape vous permettent de dabber avec classe. Diamètre 22mm, compatible avec la plupart des bangers.lacentralevapeur.com
The top one is a one hole VRod cap and the bottom one is a showerhead cap I believe. Interesting seeing them available on those euro sites as they have both been long discontinued.
Ramahs
Fucking Combustion (mostly) Since February 2017
The bottom one is not a showercap. It looks like NV's older model carb cap, older than the showercap.
710yota
Have you heard about the boom on Mizar 5?
Thanks for correcting me on this, I thought it looked a bit off from the showercap but the closest I could think of. Your probably right about it being one of the OG caps.
Chicken No Name
Dazed and confused
Would that fit the vrod...?
The Stray Fox
Separated from the group
I believe those were designed to work with 25mm dishes, not the 28mm dish the VRod uses.
The guy I bought my LolliCap from said he ordered it from VapeFiend and paid about $20 to have it shipped. Unfortunately the VRod cap and LolliCap are discontinued. I wouldn’t hesitate to order one from VapeFiend if it’s something you really want.
Here is an interesting link to an interesting idea that was submitted to CH. I too think a cape that screws on, replacing the dish nut, would be an awesome VRod flower use upgrade, Improving lower temp use and safety.
snackmaster
Well-Known Member
That’s mine but I haven’t heard anything from CH on it other than asking if they could share it. It’s what got me experimenting with leaving the cap on.
Still don’t know if it’d be better as is with more holes & more heated surface area or fewer holes & more restriction. Someone on Reddit suggested threading the side holes so you could adjust the airflow with screws, which sounds interesting.
cvs8floz
Well-Known Member
In my opinion this is the best carb cap for any Flowerpot vaporizer, especially if you always cap your hits and leave the cap on. Air flow is perfect through the many vents, so much better than anything CH has produced. I use it at 575F with 18mm glass, raising the temp just 10 degrees makes a huge difference when you cap your hits, I don't think I ever go above that even with very fresh material.
Chicken No Name
Dazed and confused
cvs8floz
Well-Known Member
Sold by Beracky on DH Gate https://www.dhgate.com/product/bera...age.astab.1.mFWCt0LOlaaScKPtmTb4&resource_id=
cvs8floz
Well-Known Member
Wouldn't work with a VRod I guess, but works with the others that don't have the center nut sticking out.
Here's how I'd do it. Instead of a lid screwing on to the dish post I'd just remove the top half of the VROD and screw this on the bottom diffuser. This would ultimately replace the weedeater head, and would also satisfy those who missed out on the Showerhead. Since people want more draw restriction, just make these holes on the top assembly smaller in diameter than the ones on the diffuser.
snackmaster
Well-Known Member
Couple interesting things in this. First the "B-rod mod" where he put 15 ruby balls in the VROD head. When I was messing around with leaving the carb cap on over the weekend I wondered if filling the sic dish with rubies would do anything desirable.
Then he shows off an auber stand with heat shield that looks different - I think they're reconfiguring the stands a bit to play nicer with the shield? The video captures it better than the screenshots.
Last edited: