ichibaneye
Vapriot, Traveler & Vaporizer/ing lover!
Because it was designed that way to begin with. No handle. It's the original style for that part.
It's Huttese! Jabbas native tongue. I said greetings.
Last edited:
Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
Because it was designed that way to begin with. No handle. It's the original style for that part.
It's Huttese! Jabbas native tongue. I said greetings.
ichibaneye
Vapriot, Traveler & Vaporizer/ing lover!
*oups!* Did I forget my own language??
Ok, but is this a reason not to offer it with a handle as an option like all the other versions?
Haha.. maybe I did it phonetically.
I can't speak for NewVape. My honest guess would be because handles were not a consideration or concept at the time in question.
I like that there are versions available without handles. It gives the minimalist minds out there another choice.
Last edited:
Hogni
Honi soit qui mal y pense
For sure but all the other offered joint sizes can be ordered with and w/o handles!?
Did you'bve seen these posts?
But have in mind that configuration of the XLR pins are different to those of the "regular" D-Nail type.
Without soldering they are not interchangable-
wibbleplonk
Well-Known Member
Attention international buyers: I've paid over 150$ just to get the FP shipped to the UK. I've ordered a lot of things from overseas and never been stung this badly before. Factor this possibility into your budget when purchasing!
Last edited:
wibbleplonk
Well-Known Member
Yes, shipping and import duties alone. This is turning into one very expensive vape. ![:\](/i/s/hmm.gif "Hmm :\")
The 14/18 male bodies are just 2 tall when using the 14. the extra length looks bad and it is believed to put to more stress on the 14mm joint. this problem doesn't exist on the female 14/18 model.
We are open to suggestions (assuming their legal) on ways to minimize custom and duty fees.
We are open to suggestions (assuming their legal) on ways to minimize custom and duty fees.
Last edited:
Andreaerdna
If God is the answer, then the question is wrong
I am reading a lot of buyers being hit by customs recently (not FP related)
Recently the Eu-Us trade agreement was sink in the atlantic, aborted
Wonder if this is related?
But this is what we have to pay when passing through customs, the facte we were not paying very often was a gift by overcharged customs, not a due
I for one did a lot of buying overseas, only time I was hit by customs was from swiss (that is right next to my country)
Thank you for report. Lucky for me I will buy enail from china so FP order will be almost the half (150?) so customs should be not too greedy
Never been hit by customs from china
thoughhttps://www.dhgate.com/product/240v-uk-version-electric-dab-nail-without/403371731.html
So this controller and coil will work?
And a shower head and I can vape flower?
Or
FlowerPot 14mm male body (for my 14mm female joint?)
And I can vape bud with this set up? What am I missing?
Still don't full understand it, but one bowl bit stays in the bong? And another bit is on the coil? I seem to be missing a component but I can't really understand the website.
I wanna get a stand and I wanna get a handle and I wanna get a lollicap if I don't don't shower head(heapppps more reading to do)
Am I grasping this? Is there a key peice I'm missing out ?
Also I use 14mm female bongs but would get a 14/18mm male vaping set up if that's achievable Incase I wanna try 18mm female, but happy with dedicated 14mm.
So this controller and coil will work?
And a shower head and I can vape flower?
Or
FlowerPot 14mm male body (for my 14mm female joint?)
And I can vape bud with this set up? What am I missing?
Still don't full understand it, but one bowl bit stays in the bong? And another bit is on the coil? I seem to be missing a component but I can't really understand the website.
I wanna get a stand and I wanna get a handle and I wanna get a lollicap if I don't don't shower head(heapppps more reading to do)
Am I grasping this? Is there a key peice I'm missing out ?
Also I use 14mm female bongs but would get a 14/18mm male vaping set up if that's achievable Incase I wanna try 18mm female, but happy with dedicated 14mm.
wibbleplonk
Well-Known Member
This is very much appreciated, even if it doesn't help in my situation. It'd be even better if you could partner with an EU distributor in the future, perhaps.
I had to get the enail from China (240V) separately. With NV I bought the FP and some nice extras like the tray and fine grinder which totalled around 320$, but just over 40$ of that was priority international shipping. Customs then hit me with almost $110 import duties. This has driven up the NV purchase cost to around 430$ without the enail which was 120$. Altogether I've paid around 550$ for the whole FP kit (with extras, no glass).
Me either. But then everything I've ever ordered from there has been marked "gift" with some ridiculously low customs declaration value.Never been hit by customs from china
No DHgate controllers/coils shipping to Aus which is strange. Any Aussie out there know where they ordered theres?
@wibbleplonk
Has been guiding me greatly think I'm soon to be confident to order
@wibbleplonk
Has been guiding me greatly think I'm soon to be confident to order
Justpassedu
Well-Known Member
Yw & ty for making dreams come true and always innovating. Good news all , I had received some updated parts the other day , everything seems to be just pure quality. I got the 20mm Shower Head , FlowerPot Coil Cover , 20mm Wrap around Sic Combo along with another 20mm wrap around custom made to fit the Dnail Sic Dish. 1st impressions , the machining is just spot on . The Shower Head is huge , luckily i have a carb cap that will fit it. I have only yet to test the 20mm wrap around with the Dnail halo installed and the Coil Cover , fitment is perfect , the dnail sic dish does spin around in the dish when q-tipping . I tried flower only so far , everything seems to be doing it's job perfectly. The Coil cover and dish hold the heat in very well , so well that i have tried it with a 20mm coil i had that did not have a great fitment , the coil cover wraps around the coil hugging it nice and snug and applying heat to the entire body and head perfectly even with this ill fitting coil. I had 0 issues with flowers at 639F , I was even super surprised at how well it held the heat in that you will see when taking my dab of flowers the temp on my enail does not drop. The coil cover is holding the heat in perfectly as to when i did not have the cover or wrap around my temps would drop at least 20-40 degrees F. Will test the Massive Shower Head tonight and report back , for now here is some vape porn , any questions please ask.
Tag Sic dish on the left and Dnail Sic Halo on the right .
Shower Head below with a carb cap that should do the trick :
A quick video for everyone , Dnail Sic Halo , with the 20mm wrap around and Coil Cover , notice how the temps really do not drop at all , it's amazing , i will reccomend the NewVape handle for your Enail now as the setup add's a bit of weight and it would really help keeping your coil in good condition :
wibbleplonk
Well-Known Member
Happy to help! Hopefully you can sort out your enail dilemma and join the FP club soon.
@Justpassedu Can't wait to see the ShowerHead in action and hear your thoughts. Will try to tune in if you're streaming.
Last edited:
Allright so I got this bad boy. I'm down to my last few grams so let's see how long it can stretch. On Youtube and way back in this thread, I came across various videos showcasing usage by various people. The microdosing intrigued me so I'm just going sprinkles at a time. Not bad at all, I'd say. Be interesting to see how long i can stretch this out while i wait for this one little plant to finish flowering (Mid-late Sep. =) ).
Right now I seem to be handicapped by my current glassware selection. I have 3 that are compatible with the bowl. My old simple little 10" tall column perc, a narrow mouth vase shaped bong about 8" or 9" tall, and a ~14 inch tall sphere-bottom classic bong. I've tried ~20-30 second draws and various rates with and without the lollicap and have found that a slow, capped draw on the tallest one seems to work the best for flowers alone. Haven't been able to get it to work with the smaller ones near as well yet for some reason.
As far as temp goes - I'm assuming it works like I'm used to with the Launch Box where a harder pull on it gives you a cooler air temp at the flower, and a lower one will give you a hotter burn. Actually, that might have a lot to do with the swing in quality between the rigs, too come to think of it. I'll have to experiment with different draw techniques and unit temps on the smaller ones. They may just have too much air coming through to cool it to hold a good burn temp.
I don't have a lot of dry sift to try in it but I was able to scrape together a scoop and it was mighty flavorful off that silicon dish. Can't wait to try a bigger scoop with a better rig. I have a little bit more but I'm going to save it for when I get my recycler to try that again. It's currently en route via China Post. So what another month =). I did though keep this little jar of Everclear that I used whenever I emptied my curing jars, I would pour it in, swish it around, then pour through a coffee filter back into the little jar. Until last night, I evap'd it down to a golden-green little pile of goo on a glass dish. So far I've just dipped my ball dabber end into it and got a nice lung full of tasty. That was real nice!
Right now I seem to be handicapped by my current glassware selection. I have 3 that are compatible with the bowl. My old simple little 10" tall column perc, a narrow mouth vase shaped bong about 8" or 9" tall, and a ~14 inch tall sphere-bottom classic bong. I've tried ~20-30 second draws and various rates with and without the lollicap and have found that a slow, capped draw on the tallest one seems to work the best for flowers alone. Haven't been able to get it to work with the smaller ones near as well yet for some reason.
As far as temp goes - I'm assuming it works like I'm used to with the Launch Box where a harder pull on it gives you a cooler air temp at the flower, and a lower one will give you a hotter burn. Actually, that might have a lot to do with the swing in quality between the rigs, too come to think of it. I'll have to experiment with different draw techniques and unit temps on the smaller ones. They may just have too much air coming through to cool it to hold a good burn temp.
I don't have a lot of dry sift to try in it but I was able to scrape together a scoop and it was mighty flavorful off that silicon dish. Can't wait to try a bigger scoop with a better rig. I have a little bit more but I'm going to save it for when I get my recycler to try that again. It's currently en route via China Post. So what another month =). I did though keep this little jar of Everclear that I used whenever I emptied my curing jars, I would pour it in, swish it around, then pour through a coffee filter back into the little jar. Until last night, I evap'd it down to a golden-green little pile of goo on a glass dish. So far I've just dipped my ball dabber end into it and got a nice lung full of tasty. That was real nice!
paytonpenn
Level 30 Nature/Healer
Can we please get a scooping tool for the Universal carb cap threading. @NewVape710
anasrzi
Well-Known Member
A scoop/ carb cap would be a super idea @paytonpenn ive got a scooper and forked carb cap made by dnail coming so I guess I'm covered on that front, salt spoon or measuring spoons work well while it's hopefully made. I'm glad you chimed in on the import taxes @wibbleplonk i have a FP on the way and some dnail equipment I grabbed preowned too so likely I'll be hit doubley hard on any import taxes.
Was quite lucky with the milaana as they didn't charge me a dime, the supreme V3 did have tax to pay which was about forty quid. Not sure how you could avoid the taxes? Might cost a lot short term but will be worth very penny (or dollar) in the end.
Looking sweet @Justpassedu enjoy the testing phase, can see from the pictures the quality of the FP gear we all keep buying like I said above worth every penny for the workmanship. Love that one with the SiC dish from dnail on it that's the one in the post to me right now in 16mm. Its good to see that your temps didn't fluctuate at all when drawing with the carb cap and heat retainer/coil cover setup but do think that's because your using a hex nail over a big standard China enail?
Man this thread is coming on fast seems everyday there's a new page being created, roll on page 100
.
Was quite lucky with the milaana as they didn't charge me a dime, the supreme V3 did have tax to pay which was about forty quid. Not sure how you could avoid the taxes? Might cost a lot short term but will be worth very penny (or dollar) in the end.
Looking sweet @Justpassedu enjoy the testing phase, can see from the pictures the quality of the FP gear we all keep buying like I said above worth every penny for the workmanship. Love that one with the SiC dish from dnail on it that's the one in the post to me right now in 16mm. Its good to see that your temps didn't fluctuate at all when drawing with the carb cap and heat retainer/coil cover setup but do think that's because your using a hex nail over a big standard China enail?
Man this thread is coming on fast seems everyday there's a new page being created, roll on page 100
.
We left the center post tall on the dnail wrap-around dish in hopes the d-nail sapphire will fit on top or under the dish nut. If someone has one and can send me the ID so I can double check.
This fit is unconfirmed? Does this thing really work without flame? If this washer is not needed we can reduce the height of the centerpost.
This fit is unconfirmed? Does this thing really work without flame? If this washer is not needed we can reduce the height of the centerpost.
Last edited:
Justpassedu
Well-Known Member
I do not stream but will try my best to get another video made tonight for you showing the Shower head.Happy to help! Hopefully you can sort out your enail dilemma and join the FP club soon.
@Justpassedu Can't wait to see the ShowerHead in action and hear your thoughts. Will try to tune in if you're streaming.
@anasrzi ty buddy. I do not think it is bc i am using the Hex Nail , the Hex will drop temps like any other nail and it has for me using my previous flower pot setup. I also have a NewVape nail as well and it dropped temps when taking a hit just like my Hex Nail. I believe it is the Coil Cover , retaining the heat so well causing me to get 0 temp drop. I am sure if i hit it real hard i may be able to get temps to drop but i am pretty happy with the results so far. Just to ease your mind though , the hex nail has no magic sorcery involved and will act just like a China Enail , its biggest difference is it has so many features to take advantage of and its beautiful enclosure but it will still drops temps like any other nail.
Baron23
Well-Known Member
@NewVape710 - high Edwyn....glad to see you are staying busy!! LOL 
LOL
I do like the silicone sleeve a bit better than the handle. I really rather like the type of silicone sleeve used by Epic with their Enano stems as its pretty firm in consistency and its is multi-sided so it won't roll when laid down. Don't know where they get them from....somewhere in China, no doubt.
https://epicvape.com/product/silicone-stem-guard/
Wrt to the party bowl....I do hope you don't make it too dang big. Yes, if we can raise the screen to a reasonable one man bowl, that would be great and make it suitable for both use cases. But I wonder at the impact of all that open space on draw restriction. It seems like some draw restriction is required for good extraction, yeah?
As far as the new carb cap goes, it seems like the most frequent mistake in carb caps is make the orifices too large and killing the draw resistance and pressure drop. I would start with one hole also.
Now me personally (not anybody else just me), I don't think I'm too interested in using the shower head with concentrates as this requires the use of an flat sapphire insert (vice a Halo type or Liger type "bucket"). Seems to me that the regular head with SiC halo will do the job of dual vaping herb/wax and my interest in the Shower Head is for its improved flower performance. So...I'm probably not the best to comment on carb caps.
wrt to the sapphire insert and needing the washer...no, I don't have one but I wonder why the washer is needed. Will the sapphire not rest easy on the top inner face of the SiC Halo?
Really like where this is going. Very interesting and flexible. Need to look at some upcoming bills that are due and see when I can place an order. Really interested in it for flower mainly.
Thanks!
LOLI do like the silicone sleeve a bit better than the handle. I really rather like the type of silicone sleeve used by Epic with their Enano stems as its pretty firm in consistency and its is multi-sided so it won't roll when laid down. Don't know where they get them from....somewhere in China, no doubt.
https://epicvape.com/product/silicone-stem-guard/
Wrt to the party bowl....I do hope you don't make it too dang big. Yes, if we can raise the screen to a reasonable one man bowl, that would be great and make it suitable for both use cases. But I wonder at the impact of all that open space on draw restriction. It seems like some draw restriction is required for good extraction, yeah?
As far as the new carb cap goes, it seems like the most frequent mistake in carb caps is make the orifices too large and killing the draw resistance and pressure drop. I would start with one hole also.
Now me personally (not anybody else just me), I don't think I'm too interested in using the shower head with concentrates as this requires the use of an flat sapphire insert (vice a Halo type or Liger type "bucket"). Seems to me that the regular head with SiC halo will do the job of dual vaping herb/wax and my interest in the Shower Head is for its improved flower performance. So...I'm probably not the best to comment on carb caps.
wrt to the sapphire insert and needing the washer...no, I don't have one but I wonder why the washer is needed. Will the sapphire not rest easy on the top inner face of the SiC Halo?
Really like where this is going. Very interesting and flexible. Need to look at some upcoming bills that are due and see when I can place an order. Really interested in it for flower mainly.
Thanks!
wibbleplonk
Well-Known Member
It's cool, I wasn't trying to put anyone off buying from overseas (in fact I've been helping @Tommy10 via DM figure out what to order from down under). Just want to ensure international buyers are aware and factoring potential customs / handling fees into their budget when purchasing so they don't end up with a nasty shock.
Likes2vape
Well-Known Member
I'll be ordering the sapphire washer today and let you know when it arrivesWe left the center post tall on the dnail wrap-around dish in hopes the d-nail sapphire will fit on top or under the dish nut. If someone has one and can send me the ID so I can double check.
This fit is unconfirmed? Does this thing really work without flame? If this washer is not needed we can reduce the height of the centerpost.
ichibaneye
Vapriot, Traveler & Vaporizer/ing lover!
Is anyone else thinking that having a raised sapphire washer that is only making a tiny bit of contact with only the retaining top nut might have heating and uneven vaporization or waste issues?
I refuse to torch anything besides my dab tools. So if its only for torching. It doesn't even currently exist in my mind..... so problem solved for me at least.
I mean, yes it's also raised up [if memory serves me correctly] on the D-nail too. But, the same concern still comes to mind.
It also looks like it would be even more fragile than the already handle with great care normal and more expensive sapphire inserts.
Yes at $50 It's far cheaper. However it's unpolished from what I could see and after breaking a few or so you'll be right back up close to the full sapphire insert price ranges basically.
https://www.newvape.com/dabber-shovel-2560
I refuse to torch anything besides my dab tools. So if its only for torching. It doesn't even currently exist in my mind..... so problem solved for me at least.
I mean, yes it's also raised up [if memory serves me correctly] on the D-nail too. But, the same concern still comes to mind.
It also looks like it would be even more fragile than the already handle with great care normal and more expensive sapphire inserts.
Yes at $50 It's far cheaper. However it's unpolished from what I could see and after breaking a few or so you'll be right back up close to the full sapphire insert price ranges basically.
https://www.newvape.com/dabber-shovel-2560
Last edited:
Thanks but before you order can we confirm it even works with an enail?
It may be designed for torch use only. Please don't order with any preconceived assumptions from me. Having that sapphire washer be hot enough to melt a dab while being suspended in air by heating via a enail doesn't seem feasible.