Arizer Solo

sethhobrin

Well-Known Member
Just got my Arizer this Friday. Previously I had been using a Purple days for 24/7 usage. It was never unplugged. It finally died and I switched to an underdog but using a purple days stem. That was about two years. But lately it just hasn't been working well and I only get two good small pulls per stem. I came back to FC and saw portable vaporizers and started reading..... After much reading I went with the Arizer and oh my.....

I currently have some Train Wreck. I used my coffee grinder to turn it in to powder practically. Half filled the bowl with a screen and turned it up to 3...... Pretty easy to get going after pulling it out of the box.

I had meant to keep count of how many pulls and all that but I sort of lost count around 15 or so mad huge clouds...... I am amazed.... This thing is amazing it just won't quit..... Pull after pull after pull of huge vapor clouds...... mmmmmmmmm and the taste....

I end up using 2.5 times the amount of plant that I used to use per packing but I would pack a million of those little purple days bowls. This is MUCH better. No charring or burning just a medium dark brown consistently across all the splent plant.

Just wanted to say thanks guys for turning me on to this thing. Just purchased a case and PVHES shorty straight with tube this thing is definately a keeper.
 

tbone

Member
Do the newest versions need the o-ring as well?
I've got an M1D2; I often use the solo upside down, so I needed the o-ring. I got O-rings from planetvape -a word of caution, though... don't screw on the top too tight! I'm under the impression (from vague memories of old posts here) that older models had more of a recessed area for the o-ring. Mine did not. I thoughtlessly screwed on the top as tight as possible, which had the unanticipated result of pushing the plastic at the bottom of the unit past the screw heads and cracking the plastic. A couple of fine pieces broke off due to that cracking.

End result is that I now have electrical tape on the bottom of the month old solo to make sure it doesn't get any worse. The unit still works fine, but this was a bit disappointing. I continue to use the o-ring, I just don't screw on the top completely.

You can load as much in the Solo as you want. You can buy the shorty PVHES glass stems from PlanetVape they use less herb, but you don't have to.
I'm hearing some are able to use the PVHES stems from PV and some are not with the new design of the Solo. Is the jury still out on that one?
I've got one of the newer units and purchased a PVHES bent shorty turbo and regular GonG adapter. Both work just fine; I'm using an o-ring (included with purchase), I can't speak to the fitting without the o-ring.

Having said that, I actually prefer the newer stock stem to the PVHES shorty turbo. I like the shorty part, but I think the turbo provides too much airflow for how I've become accustomed to using the solo. I get more desirable, predictable results with the stock stem.
 
Last edited by a moderator:

Alex43rd

Arizer Air
My Solo arrived yesterday and it's not a M1B1 It's a M1D2 and I love it!! Only problem is the stems. The Curve fits perfectly, but the Straight stem is too loose. GV said I could return it for a new one at anytime within the 2 years and they are sending me another curve stem. I think I just need a O ring or washer. I want to order one but it's sold out everywhere. Anyone know where I can buy one in NYC, what type and size? Or anywhere online for The Solo. Thanks!
 
Alex43rd,
  • Like
Reactions: 2clicker

poonman

Well-Known Member
My Solo arrived yesterday and it's not a M1B1 It's a M1D2 and I love it!! Only problem is the stems. The Curve fits perfectly, but the Straight stem is too loose. GV said I could return it for a new one at anytime within the 2 years and they are sending me another curve stem. I think I just need a O ring or washer. I want to order one but it's sold out everywhere. Anyone know where I can buy one in NYC, what type and size? Or anywhere online for The Solo. Thanks!


Planetvape.ca has all the Solo stuff you'll want .
It should get to NYC , np .
They come with o-rings if you order the stems .
 

OF

Well-Known Member
So I've had my first couple of days with the Solo, and holy sh*t this little thing is just amazing!

Great news for you for sure, but you couldn't keep it to yourself now could you? Had to go shooting your mouth off, now everybody's gonna want have one.......if they have any wits about them that is.

Enjoy the little sucker, that's why they made them and why you paid the bucks, right?

Just got my Arizer this Friday. Previously I had been using a Purple days for 24/7 usage.
I had meant to keep count of how many pulls and all that but I sort of lost count around 15 or so mad huge clouds...... I am amazed.... This thing is amazing it just won't quit..... Pull after pull after pull of huge vapor clouds...... mmmmmmmmm and the taste....

I end up using 2.5 times the amount of plant that I used to use per packing but I would pack a million of those little purple days bowls. This is MUCH better. No charring or burning just a medium dark brown consistently across all the splent plant.

Yup, about what I found. I pack about .125 grams per Solo stem, three of my normal PD stems. It's been a while, my PD is boxed up, since the Solo is so enticing.

Thanks, but they are soldout..
You want a high temperature rated silicone o-ring size 113. I don't believe anyone has been able to source them locally anywhere. Try McMaster Carr or the o-ring store. But you will have to buy 100, or just wait on PV to have then again

Alex, are you in the US? If so, PM me, I've still got a few here somewhere, I'll mail you a couple since I seem to have forgotten you at Christmas......again.

OF
 

Alex43rd

Arizer Air
You want a high temperature rated silicone o-ring size 113. I don't believe anyone has been able to source them locally anywhere. Try McMaster Carr or the o-ring store. But you will have to buy 100, or just wait on PV to have then again
Thanks

Yes , they're very popular .
Someone posted a few pages back , that they were back in stock .You'll have to keep an eye on it , or maybe contact them for alerts .

Their Gongs are def. worth it .

here's the link for the o-rings # 113 is what you want .
http://www.mcmaster.com/#9396k26/=qel54f
Thanks

Alex, are you in the US? If so, PM me, I've still got a few here somewhere, I'll mail you a couple since I seem to have forgotten you at Christmas......again.

OF
Lol.. Thank you!! I really appreciate it. I'm new to this. How do I PM? @OF
 
Last edited by a moderator:
Alex43rd,
  • Like
Reactions: OF

ataxian

PALE BLUE DOT
eqngxs.jpg
Really cool to play around!
 

exit

Well-Known Member
Got my M1D2 in the mail but.....
I don't feel like it heats very evenly!

I keep feeling like it's tasting too hot by the end of the bowl and if it's packed as full as I used to pack bowls, it looks burnt in the middle.

Tomorrow i'll take pictures but i did like 12 indica bowls out of my EVO today and really need to lie down

Ok so I did some a couple more bowls out of it of my stuff. I tried my non PVHE stem to see if that was what was causing the "burn spot". I packed the bowl less full than I normally would but it still hit great even with my stock stem.

I swear it's a little harsher than Solo used to be though so I think I need to mess with lower temp settings or something on it.
 

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
You know as you stumble through life having so much fun (giggles at every turn it seems?), there's the 'alternate universe' where several guys have to be miserable just so the average will come out right......

I hope you're proud of yourself?

OF
Ah yes, the alternate universe where I'm married to Penelope Cruz and have my AmEx Black card... :zzz:
 

ataxian

PALE BLUE DOT
You know as you stumble through life having so much fun (giggles at every turn it seems?), there's the 'alternate universe' where several guys have to be miserable just so the average will come out right......

I hope you're proud of yourself?

OF
I took the Bubbler off.
Trying to be more average!
CACTUS COOLER, GIRL SCOUT COOKIES and DUTCH TREAT
Not so average strains however fulfilling!
SOLO LEVEL 4!
 

Rare

Active Member
Anyone know of any good cases for the solo?

Specifically something like this

Or if anyone has one of those they'd sell me lol..

But yeah, i'm really looking for something along the lines of that. Not really feeling the vapecase that's 50 bucks or whatever. Thanks.
 

Alex43rd

Arizer Air
Silicone O-rings!! Great price.
http://www.oringsandmore.com/silicone-o-rings-size-113-price-for-50-pcs/

Anyone know of any good cases for the solo?

Specifically something like this

Or if anyone has one of those they'd sell me lol..

But yeah, i'm really looking for something along the lines of that. Not really feeling the vapecase that's 50 bucks or whatever. Thanks.
Vapecase!! It's really good. 39.99. Keeps everything safe and secure. Not big at all. Actually small.
 
Last edited by a moderator:

Rare

Active Member
Aw, I said above I wasn't interested in the vapecase. Thanks for the suggestion anyways though.

And that will fit the solo?! You have no idea how stoked I am haha. Thanks man.
 
Last edited by a moderator:

smokum

I am who I am and your approval isn't needed!
And that will fit the solo?! You have no idea how stoked I am haha. Thanks man.


Sorry no, I messed that effort up during a vaped state of mind :ko:

Not sure where your located, but Ryot makes the case in the video and are available out there.
 
smokum,
  • Like
Reactions: Rare
Top Bottom