Arizer Solo

vv132

vv132

Active Member
hey so I recently injured my neck and was wondering when using the straight stem if its fine to hold the solo horizontal, basically holding it flat? (blunt like position instead of bending my neck holding the solo verticle) Does that effect the evenness of the burn? or detract from the solo?

Also If you guys are in no rush and using the solo, do you find that u take 2 sessions (more than 12 min) per stem? Or do you guys finish usually before it turns off? I dont mind flicking it back on as it usually gets back to the desired temp right away. Just wondering

thanks for the replies guys

PS: its been 10 days since i ordered my PV stems, still waiting AHHH haha
 
E

exit

Well-Known Member
OF said:
Most likely not.

It's the milk fat you want. Not some substitute. I won't work with reduced fat milk even, the junk often put in the packets doesn't stand a change to bond with the good stuff. Stick with the real stuff. There's a reason why butter is so commonly used in making eatable treats, Alice B. Tolka's brownies would not have worked with today's 'fat free' foods.

If you're set on using the mix (most likely because it's what's handy?), splurge some this time, use a healthy dose of real milk as well (not skim or low/no fat)......it fact cream would be better?

You can get back on the diet tomorrow, you've got too much invested here to blow it I think?

Good luck.

OF
Click to expand...

I guess I was too medicated to fininsh the post you replied to?
I have bunches of almond and soymilk and hempmilk even on hand :)
 
exit,
OF

OF

Well-Known Member
exit said:
I guess I was too medicated to fininsh the post you replied to?
I have bunches of almond and soymilk and hempmilk even on hand :)
Click to expand...

Sorry, I don't think any of them will work. You need fat. As in butterfat. That's why coconut oil is so useful.

You don't want 'healthy' here.

The gig is the THC bonds to the fat and you absorb the fat (and with it the THC). Due to some evolutionary slip up soy didn't make it into the gene pool in time?

You've only going to get one shot with that stem, I advise against experiments......

OF
 
Hexi

Hexi

Well-Known Member
vv132 said:
hey so I recently injured my neck and was wondering when using the straight stem if its fine to hold the solo horizontal, basically holding it flat? (blunt like position instead of bending my neck holding the solo verticle) Does that effect the evenness of the burn? or detract from the solo?

Also If you guys are in no rush and using the solo, do you find that u take 2 sessions (more than 12 min) per stem? Or do you guys finish usually before it turns off? I dont mind flicking it back on as it usually gets back to the desired temp right away. Just wondering
Click to expand...

2x 12 min sessions is pretty common here to finish a packed stem. (biggest drawback of the Solo IMO, but far from a deal breaker)
 
Mrmrmrmr

Mrmrmrmr

Well-Known Member
Try switching to water eh, I find that cuts down on the session time and you can control how fast it goes by with how hard your pulling
 
Mrmrmrmr,
vv132

vv132

Active Member
Mrmrmrmr said:
Try switching to water eh, I find that cuts down on the session time and you can control how fast it goes by with how hard your pulling
Click to expand...
yea i want too, but PV water adapter is taken forever to reach..EH, thanks for the replys Calig, and Hexi
 
vv132,
  • Like
Reactions: Caligula
E

exit

Well-Known Member
OF said:
Sorry, I don't think any of them will work. You need fat. As in butterfat. That's why coconut oil is so useful.

You don't want 'healthy' here.

The gig is the THC bonds to the fat and you absorb the fat (and with it the THC). Due to some evolutionary slip up soy didn't make it into the gene pool in time?

You've only going to get one shot with that stem, I advise against experiments......

OF
Click to expand...

Hmm well I do have coconut oil on hand. I can just use that with some milk to absorb the THC but wasn't sure if that'd really be worth it, hadnt looked into using the other options. I make giant batches of weedy coconut oil all the time. I suppose I could just mix some with the stem to clean it out although I don't have any fresh stuff, it's all already been infused ;)

Butter and milk are out of the question. Not a diet thing, I've been vegan 10+ years
 
zymos

zymos

Well-Known Member
Soymilk has about the same amount of fat as lowfat cow milk. Quality cocoa powder also has a good amount of fat in it. Maybe between the both of them that's enough? But if you have coconut oil already, may as well go with that....
 
rekrab

rekrab

Well-Known Member
thanks for the tips on cutting. i will giver a shot eh. i figure 12 bucks right a way making my own gong is just as easy as paying 25 plus for one to get shipped to me. even if i am in canada
 
rekrab,
  • Like
Reactions: OF
E

exit

Well-Known Member
zymos said:
Soymilk has about the same amount of fat as lowfat cow milk. Quality cocoa powder also has a good amount of fat in it. Maybe between the both of them that's enough? But if you have coconut oil already, may as well go with that....
Click to expand...

ya i was thinking soymilk, coconut oil already infused with weed, altho might put it off for a few days and just go get some fresh coco oil to make it with
 
michaelstone

michaelstone

Well-Known Member
I happened to notice that when I plugged in vape to use it was on 3, after 1 1/2 sessions it was on 2. Not sure what it means but thought I'd share. It's clearly losing power when using charger while vapin though.
 
michaelstone,
  • Like
Reactions: OF
A

as

Well-Known Member
rekrab said:
thanks for the tips on cutting. i will giver a shot eh. i figure 12 bucks right a way making my own gong is just as easy as paying 25 plus for one to get shipped to me. even if i am in canada
Click to expand...

I make my gong as well you cut it so it has just enuf so that the bigger bit at the bbottom will make a seal or do as i do and just put some ssv whip on the end then wedge on a 18/14 adaptor on the end and you have a good hands free gong
 
as,
OF

OF

Well-Known Member
ehakim said:
Any have some adivice on how to get better airflow when using the o-ring?
Click to expand...

ehakim said:
What's the best way to go about doing that?
Click to expand...

http://fuckcombustion.com/threads/arizer-solo.3833/page-780#post-470338
http://fuckcombustion.com/threads/arizer-solo.3833/page-718#post-446808
http://fuckcombustion.com/threads/arizer-solo.3833/page-718#post-446700
http://fuckcombustion.com/threads/arizer-solo.3833/page-717#post-446389
http://fuckcombustion.com/threads/arizer-solo.3833/page-676#post-426206
http://fuckcombustion.com/threads/arizer-solo.3833/page-598#post-392981
http://fuckcombustion.com/threads/arizer-solo.3833/page-575#post-385200
http://fuckcombustion.com/threads/arizer-solo.3833/page-573#post-384817

OF
 
ataxian

ataxian

PALE BLUE DOT
exit said:
ya i was thinking soymilk, coconut oil already infused with weed, altho might put it off for a few days and just go get some fresh coco oil to make it with
Click to expand...
What is all this food talk?

I keep my glass stems sparkling clean.
Flavor is so critical.

I guess different stroke for different folks?

Eating Cannabis sounds gross!

Soy Milk?
Doesn't it cause cancer?
 
You must log in or register to reply here.
Top Bottom