Arizer Solo

[ataxian]

Here's a glass shop I came across which has lots of glass that seems a good match for the Solo. Even has a 18mm WT that looks like it has a smaller mouth piece. Has your name on it @ataxian.
I was trying to order just the 90 degree 14mm elbow to use with the Gong when using dry. An alternative to the shamrock which they also have. Unfortunately, they only ship to US. Boooooo.
Anyway for you guys that live in the US, check it out here. Reasonable shipping prices too.

PIPES!

This "OG" in a PHVES is unreal!

Just had a regular stock stem!

OK let me rate them!

PHVES = fun
Stock = Surprisingly Wonderful

Results = Both of them are both very useful

Conclusion = Enjoy all of it!

 

[Caligula]

@ataxian did u see anything on that site which would work like your rigged bender top for the PWNT?

 

[ataxian]

@ataxian did u see anything on that site which would work like your rigged bender top for the PWNT?

I used the SOLO all day today!
Tomorrow WAKE & VAKE with BENDER!

I have a way to hook up the PWNT with the BENDER!


SOLO after.

 

[Caligula]

Scooby snack time!

Initial bed of Lemon Skunk, followed by Twerkle (Train-wreck x Purple Urkle) full melt hash, then a layer of GSC with a dab of full nug Tangie shatter, all capped with shake from about 4 different top shelf strains.

Hitting it through the PNWT @ level 5.

It took me about 10 minutes to write this.

Littering and?

 

[MileHighLife]

You ARE freaking out ... man

 

[ataxian]

@ataxian did u see anything on that site which would work like your rigged bender top for the PWNT?

http://www.planetvape.ca/14mm-to-18mm-adapters.html

They don't have a picture posted!

I will use the following for today's menu:

Set up A
BENDER + 18mm male/14mm male adapter + PNWT+ EVA reducer bushing + BENDER mouth piece.

Set up B
SOLO + 18mm GonG + 18mm female/14mm male + PNWT + EVA reducer bushing + BENDER mouth piece.

Set up C
NANO + 14mm GonG + PNWT + EVA reducer bushing + BENDER mouth piece.

Set up D
LSV + 18mm WPA + 18mm female/14mm male + PNWT + EVA reducer bushing + BENDER mouth piece.

No concentrates today!

Water Path Trials with only 15 grams of Tight Flowers (OG) may not be enough however I will make an effort regardless!

I'm just kidding!
One gram is enough to complete the trials!

OG FLOWERS is all I have!
My Dutch Treat I'm saving!

I session and I'm so medicated.
Have too wait.
it might take me 2 days?

 

[Caligula]

Try using warm water in your water paths while your at it. I find it changes the whole feel of things.

 

[21stCenturyVape]

Are the M1D1 units newer than the M1D2s? I own an M1D2 (purchased in early October) and it most certainly does not allow for pass-through usage with that standard charger. Am I missing something here?

 

[michaelstone]

Hmmmmm did I say mine was M1D1? I just checked and its actually M1D2, and it does for mine.

 

[smokedogg69]

Man I just bought one in October, I hope they can do a software update or something

 

[Caligula]

That's not a software issue. Sorry.

 

[smokum]

That's not a software issue. Sorry.

Are you 'sure' ? or better worded ... firmware updated ? seeing its most likely logic related

 

[Caligula]

I dont see how it could be unless the hardware inside the older Solos can step the voltage down as well. Maybe they can? But if it was that easy why hasn't anyon done it yet (Arizer or anyone else). Maybe someone who has taken a solo apart can comment. @Pipes @OF

 

[Hexi]

Since the solo doesn't have USB, a firmware update would have to be a hax.

 

[OF]

I dont see how it could be unless the hardware inside the older Solos can step the voltage down as well.

I don't know for sure (having never even seen a new one.....) but I too highly doubt it. Time will tell?

OF

 

[Snappo]

I wish to reaffirm here that the Solo is SOLID in technology, design, execution, and support !

 

[Dreamerr]

But Snappo we get zero answers with revisions and we are left to figure it out. Now we have two of the same serial numbers one acting like it has a revision and one not M1d2. This is not kewl in my opinion. I wish they would just post them on there site ugh.

 

[olivianewtonjohn]

But Snappo we get zero answers with revisions and we are left to figure it out. Now we have two of the same serial numbers one acting like it has a revision and one not M1d2. This is not kewl in my opinion. I wish they would just post them on there site ugh.

I agree at times I feel like arizer is less enthusiastic about their vaps than we are lol.

 

[Dreamerr]

If it wasn't for PV we wouldn't haven't even know for sure that there were changes. People were saying, I am not calling them liars, that there were differences but we were rightly so suspecious.

 

[way2]

Did anyone email arizer and ask? Not that they are forthcoming with info...but it might be worth a shot?

 

[Snappo]

But Snappo we get zero answers with revisions and we are left to figure it out. Now we have two of the same serial numbers one acting like it has a revision and one not M1d2. This is not kewl in my opinion. I wish they would just post them on there site ugh.

Arizer's silence on these matters has always been a puzzle to me too. But I cannot argue with their product. Or for that matter, the wisdom of their revisions. They are gauging and adjusting all things over time, I feel. Marketing and technology forging ahead. And I simply may not be in a position to question their business policy with regards to various voluntary public disclosure. One could most likely correspond with Arizer HQ to probe a tech change once uncovered.

I think one of the things that attracted and holds me to the Solo was/is the visual & technological simplicity of it all, so well executed in design and function - which continues to evolve! This is good! I have also said this of the Lotus vape, as it also appeals to my sense of history and aesthetics, well within my comfort zone.

 

[ataxian]

But Snappo we get zero answers with revisions and we are left to figure it out. Now we have two of the same serial numbers one acting like it has a revision and one not M1d2. This is not kewl in my opinion. I wish they would just post them on there site ugh.

For one the SOLO is so simple and easy to use.
The 2nd point is ARISER runs their business their way regardless of the critics.

1.) Smaller Foot Print
2.) Add some Color choices
3.) Plug on the side instead of the bottom

Just a few tweaks.

Will they listen?
Probably not?
Thank GOD for PLANET VAPES!

 

[Dreamerr]

Yes, thankfully we do have PV who gave us some answers and I am hoping over time they will have the rest for us and maybe more goodies like the chillum stem. Hey taxi I was wondering why can't a chillium be made with a diff mouth piece part with the same skinny hole? I can't see any reason it can't be done and you can then double it as a very strange gong with less airflow hmmmmmmmmmmmm. Are you up for the challange @PlanetVape ?

Edit: @taxi or even like one of the curved mouth pieced you liked....maybe you should become a glass blower for us. Give it a go @Pipes cause you never break any glass

 

[ataxian]

Edit: @taxi or even like one of the curved mouth pieced you liked....maybe you should become a glass blower for us. Give it a go @Pipes cause you never break any glass

I thought about blowing my own glass.
I have so many hobbies already.
Maybe if I drop a few hobbies and take up glass blowing?

 

[Notaek]

does anyone prefer the turbo glass on glass adapter over the regular 4 hole version?