Arizer Solo

Frederick McGuire

Aggressively Loungey
Thx...you're the only response. Unfortunately, mine has not began to work again. Guess I'll try to hold off on sending it in until I can get a backup of some kind. I'd hate to be without it!

So your blue led doesn't light up, but do all the other lights work properly?

I had an issue where by blue LED (actually, I can't remember if it was my blue one specifically, but I'm pretty sure it was) wouldn't turn on, and my temp LEDs were acting strange.

I could still select my temp as normal, but if I went to 4 or above, the 3rd LED below it would also light up (so 1&4, 2&5, 3&6, 4&7 seemed to be paired)

Eventually it just fixed itself, and my solo has been going strong since (and its performance never dropped while the LEDs were being funny)

Try searching this thread for how to reset the solo.
I can't remember the exact steps, but it's basically plugging it into the charger an pressing the buttons in a certain order.

I know I tried it at some point while my LEDs were playing up, maybe it'll help?
 

sasNW

Well-Known Member
Just got my replacement solo... My m102 ceramic starting chipping. Luckily I live 30 minutes from the place that does warranty service in the us. I actually had my replacement before I even sent mine in, no time without a solo:tup:

Just wondering if anyone else has an m1b1 like the one I received? Just curious since I see everyone saying the m1a1 as the newest model.

Honestly I miss my ceramic bowl:\, I'm very into taste of my meds growing my own and all. And honestly I notice a surprisingly big difference in taste the first day. Still loving my solo, but damn I miss the taste of the ceramic bowl:2c:
 

olivianewtonjohn

Well-Known Member
Just got my replacement solo... My m102 ceramic starting chipping. Luckily I live 30 minutes from the place that does warranty service in the us. I actually had my replacement before I even sent mine in, no time without a solo:tup:

Just wondering if anyone else has an m1b1 like the one I received? Just curious since I see everyone saying the m1a1 as the newest model.

Honestly I miss my ceramic bowl:\, I'm very into taste of my meds growing my own and all. And honestly I notice a surprisingly big difference in taste the first day. Still loving my solo, but damn I miss the taste of the ceramic bowl:2c:
Man the original solos must have been BEASTS. Probably would have been close to perfection if it did not have that chipping bowl.
 
olivianewtonjohn,

sasNW

Well-Known Member
Really was perfect other then the chipping, I didn't know there would be this big of a difference with the newer models. If I ever find another old model I'm buying it on the spot and never sending it back, plus the ceramic chipping wasn't that bad. Hopefully some testing tomorrow will bring better results
 
sasNW,

olivianewtonjohn

Well-Known Member
Really was perfect other then the chipping, I didn't know there would be this big of a difference with the newer models. If I ever find another old model I'm buying it on the spot and never sending it back, plus the ceramic chipping wasn't that bad. Hopefully some testing tomorrow will bring better results
Yeah dont give up the newer solos are great (I mean they must be look at the length of this thread)
 

Caligula

Maximus
Whoooo... went on a spending spree today!

Bought a black Arizer Solo, a @Pipes AIO+ charger/stand, 14mm PVHE GonG adapter, Pinnacle WT, 4 piece grinder, and a rugged Pellican 1200 hardcase to put everything in! Lol, oh and a quarter of some fine Lemon Skunk to use in it... now it just needs to get Here!

Sigh, I hate waiting.
 

olivianewtonjohn

Well-Known Member
Whoooo... went on a spending spree today!

Bought a black Arizer Solo, a @Pipes AIO+ charger/stand, 14mm PVHE GonG adapter, Pinnacle WT, 4 piece grinder, and a rugged Pellican 1200 hardcase to put everything in! Lol, oh and a quarter of some fine Lemon Skunk to use in it... now it just needs to get Here!

Sigh, I hate waiting.
Great combo almost exactly what I have, I saw in the jyarz thread you bought one of those too. Hopefully that 4 piece grinder is a SCS lol. If it is then we have the same setup (other than case and pipes gear).
 

Caligula

Maximus
Actually it's a free 4 piece aluminum grinder that came with the solo (from PuffItUp). Supposedly its a space case clone that's CNC machined, etc...

Whatever, it was free.

If this grinder sucks a nut and I do buy one though, I'm getting a Santa Cruz 2 piece. ;)

Really looking forward to this. I've been vaping concentrates for a while now but this will be my first trip into the world of flower vapes.
 

nighteyes

Vaporist
Whoooo... went on a spending spree today!

Bought a black Arizer Solo, a @Pipes AIO+ charger/stand, 14mm PVHE GonG adapter, Pinnacle WT, 4 piece grinder, and a rugged Pellican 1200 hardcase to put everything in! Lol, oh and a quarter of some fine Lemon Skunk to use in it... now it just needs to get Here!

Sigh, I hate waiting.

Had my pipes AIO for a day and love it, works great.
 

ataxian

PALE BLUE DOT
Just got my replacement solo... My m102 ceramic starting chipping. Luckily I live 30 minutes from the place that does warranty service in the us. I actually had my replacement before I even sent mine in, no time without a solo:tup:

Just wondering if anyone else has an m1b1 like the one I received? Just curious since I see everyone saying the m1a1 as the newest model.

Honestly I miss my ceramic bowl:\, I'm very into taste of my meds growing my own and all. And honestly I notice a surprisingly big difference in taste the first day. Still loving my solo, but damn I miss the taste of the ceramic bowl:2c:




Seeking flavor requires imagination!
 
Last edited:

mmenzie

My friends call me "Menz"
I had an issue where by blue LED (actually, I can't remember if it was my blue one specifically, but I'm pretty sure it was) wouldn't turn on, and my temp LEDs were acting strange.

I could still select my temp as normal, but if I went to 4 or above, the 3rd LED below it would also light up (so 1&4, 2&5, 3&6, 4&7 seemed to be paired)

Eventually it just fixed itself, and my solo has been going strong since (and its performance never dropped while the LEDs were being funny)

mine has been doing the same thing for weeks now and it has not "fixed" itself :(
 

Snappo

Caveat Emptor - "A Billion People Can Be Wrong!"
Accessory Maker
Immediate email reply from PlanetVape.com:
"Thanks for contacting us about PVHES Chillums for the Solo. Yes we have gotten a lot of requests and will be looking into manufacturing them as a standard Solo product. It will take us a few weeks to get enough Chillums in stock to make a production run and have lots of varieties in stock. We will make both Turbo and Non-Turbo PVHES Chillums.


Thanks for letting us know that there is interest to have these made.


Kind Regards,

PV"
 

samirfuzzywuzzy

Well-Known Member
@Dreamerr - Normally when some one wants to look in my "HOLE" I open up a can of......

But for you, anything, just because your lips are so beautiful!!!

DSC_0273.jpg


DSC_0275.jpg


Keep in mind that these DONT have an ultra fine screen in them yet.
 

Jarva

Member
I just order my solo what tips and trick should i know i also is there any sort of water tube attachment?


Edit No need for the top comment any more
i guess i just joined the Solo Club Lol

Thank you
 
Last edited:
Jarva,

ma125

Well-Known Member
Thx...you're the only response. Unfortunately, mine has not began to work again. Guess I'll try to hold off on sending it in until I can get a backup of some kind. I'd hate to be without it!
Your welcome mate... Yeah that sucks, when my LED started acting up my solo had already passed its warranty so I kind of freaked out... But it never stopped working.
If yours is dead and still under warranty, i strongly advise you to contact Arizer.
Hope that you can sort it out.
Happy vaping
 

WildChild

Seeking My Shangri-La
Immediate email reply from PlanetVape.com:
"Thanks for contacting us about PVHES Chillums for the Solo. Yes we have gotten a lot of requests and will be looking into manufacturing them as a standard Solo product. It will take us a few weeks to get enough Chillums in stock to make a production run and have lots of varieties in stock. We will make both Turbo and Non-Turbo PVHES Chillums.


Thanks for letting us know that there is interest to have these made.


Kind Regards,

PV"
Nice work, Snappo! ...now if I can only figure out why my shipping rate from them is now double what it was 3 weeks ago...
 
WildChild,
  • Like
Reactions: ataxian

ma125

Well-Known Member
So your blue led doesn't light up, but do all the other lights work properly?

I had an issue where by blue LED (actually, I can't remember if it was my blue one specifically, but I'm pretty sure it was) wouldn't turn on, and my temp LEDs were acting strange.

I could still select my temp as normal, but if I went to 4 or above, the 3rd LED below it would also light up (so 1&4, 2&5, 3&6, 4&7 seemed to be paired)

Eventually it just fixed itself, and my solo has been going strong since (and its performance never dropped while the LEDs were being funny)

Try searching this thread for how to reset the solo.
I can't remember the exact steps, but it's basically plugging it into the charger an pressing the buttons in a certain order.

I know I tried it at some point while my LEDs were playing up, maybe it'll help?
My issue was EXACTLY like yours, I just couldnt explain it so eloquently :doh:
 
Last edited:
Top Bottom