Arizer Solo
- Thread starter Rockwise
- Start date
-
- Tags
- arizer battery powered
michaelstone
Well-Known Member
i use one bowl for quite awhile on 3-4...
Was looking for portability and stealth. My wife's family is not on board with my therapy, so I am trying to be accomodating.
Session: load to top lightly, turn to 4, take 5 draws, one after another. turn to 5, draw 5 more, cash bowl. about 5 minutes tops, never pull out bowl as I draw consecutive usually.
Session: load to top lightly, turn to 4, take 5 draws, one after another. turn to 5, draw 5 more, cash bowl. about 5 minutes tops, never pull out bowl as I draw consecutive usually.
Is this consecutive? do you wait in between puffs and do you have like a time that you take to draw? on my pax, i tried to go slowly and count to 15, seems like this is brown right away imo.
i really need 2-3 stems, but I agree it's hard to feel good about a small cloud.
smokum
I am who I am and your approval isn't needed!
I typically run one load on 3 for the 12 min session, fire it up again after a stir (or tap shake in my case) and run about 5 mins or 5 (or until I don't care for the taste anymore or lack of taste at all).
Sorry, never kept a hit count personally because the reference is mute considering the different ways and limits other inhale. All I know is with the product 'I' use does 'me' fine for an hour or two for what I'm looking for for effect.
<-- Top Quality bud user here too (I can say that because it's organic & my own
)
**Added: If your using the stock stems, try lifting the stem off the chamber floor an 1/16th or 1/8th inch... I find this to add to the visual vapor 'if' I'm hunting for it.
Also to note, I'm still using my M102, and that even within the same model numbers there are variances of heat related to the temperature led/number.
Sorry, never kept a hit count personally because the reference is mute considering the different ways and limits other inhale. All I know is with the product 'I' use does 'me' fine for an hour or two for what I'm looking for for effect.
<-- Top Quality bud user here too (I can say that because it's organic & my own
)**Added: If your using the stock stems, try lifting the stem off the chamber floor an 1/16th or 1/8th inch... I find this to add to the visual vapor 'if' I'm hunting for it.
Also to note, I'm still using my M102, and that even within the same model numbers there are variances of heat related to the temperature led/number.
olivianewtonjohn
Well-Known Member
You are doing something wrong. I grind mine up, heat to 2 without the stem, place stem in and wait 20 or so seconds and then I start taking hits, I then increase 1 level at a time til I reach 7 I keep going until I get no more vapor. I used bowls that were small. Two bowls got me and a buddy vary medicated
wow, not sure what I could be doing wrong, maybe I have the world's largest tolerance. The solo is pretty much idiot proof imo. Maybe I am pulling the herb too fast but it's pretty dark on 4 after 5 minutes.
olivianewtonjohn
Well-Known Member
Mine comes out very brown, more black maybe. The taste isn'tgreat but I don't stop until i stop getting a hit. When the bowl is truly cached I empty it. I am usually so medicated at that point I don't really notice the taste. I didn't vape every day but did vape close to other day and 1.75 ($20) lasted me over a month
olivianewtonjohn
Well-Known Member
Dam. We have very diff techniques then, I don't do more than maybe 6 hits on 2. Seems like I stop getting vapor after that much and have to go up in temps
This is my experience as well. Even after I'm done my abv is still a light golden brown. The ONLY time I get dark abv is when I'm vapebonging. I should mention that I had never hit a solo before last Monday, I've got the newest m1a4 model. Maybe the new models take the herb further than the older models???? Any thoughts from those that use the older models?
You guys are amazing. I just tried some 3/4/5 and did more for longer, but still might have pulled early. I did say I enjoyed setting 3, as I never got lower than 370 on the pax. I guess it took me time to find the pax amazing, I guess only time will make me appreciate how cool this tool is.
I've never tried a Solo, but the varying descriptions I see posted here all scream "draw speed" at me. If you're getting light brown or greenish ABV then you probably are pulling too hard. I've never heard of a vapourizer that benefited from drawing harder once it felt restricted, so that should tell you how gently you have to pull.
Dangus
Yeah, well, that's just, like, your opinion, man.
I picked up a Solo recently for my mother-in-law. She LOVES it. I like it a lot too....and will most likely acquire one after things settle down a bit(in the middle of a move). Seems it'd fit in nicely with my line up...
There's been some discussion on here about worked/colored stems. I have a number of friends who are glass blowers...when I get a solo I will certainly investigate getting a custom stem made...and when that happens, I'll report back.
Cheers!
There's been some discussion on here about worked/colored stems. I have a number of friends who are glass blowers...when I get a solo I will certainly investigate getting a custom stem made...and when that happens, I'll report back.
Cheers!
How the hell do you accidentally run over a vaporizer???
sam reynolds
because "Samantha" is a mouthful.
drbluntastik
New Member
I love the idea of a McDonalds straw styled tube. Better than the stealth adapted and straw idea. Maybe closer to the size of an actual straw. Just ordered my solo this morning. So exited
Frederick McGuire
Aggressively Loungey
Ok guys, a little help would be appreciated.
I think my original M102 is on its last legs
Basically, last night I went to use it, so I packed a stem, turned on the solo and set it to 4.
After about 5 minutes, I noticed it was still only showing a heat level of 1, and the heater light was on solid, not flashing.
(Interestingly, the top of the stem was warm, so it definitely heated up a little bit)
I tried plugging it into the charger, and I just get a flashing green light, no indicators of the current batt level at all.
I then did a search here, and found this:
So I tried that, and it now seems to be heating up properly
But I still get the strange charging behaviour of just a flashing green light![:\](/i/s/hmm.gif "Hmm :\")
Anyone got any ideas what could be causing this or what I should do with it?
(I'm hoping it just means I no longer have the batt indicator while charging, but everything else will run ok
)
I think my original M102 is on its last legs
Basically, last night I went to use it, so I packed a stem, turned on the solo and set it to 4.
After about 5 minutes, I noticed it was still only showing a heat level of 1, and the heater light was on solid, not flashing.
(Interestingly, the top of the stem was warm, so it definitely heated up a little bit)
I tried plugging it into the charger, and I just get a flashing green light, no indicators of the current batt level at all.
I then did a search here, and found this:
So I tried that, and it now seems to be heating up properly
But I still get the strange charging behaviour of just a flashing green light
Anyone got any ideas what could be causing this or what I should do with it?
(I'm hoping it just means I no longer have the batt indicator while charging, but everything else will run ok
)