Arizer Solo

[Stu]

fack, I bought 1/2"....would the 5/8th fit better?

IME 1/2" works best and can be either slightly domed, or pushed flat.

 

[arrr]

IME 1/2" works best and can be either slightly domed, or pushed flat.

Are they easy to get in and out of the stem. Also any place you recommend buying them from?

 

[vape4life]

Thanks Stu! You just confirmed what I thought already, 5/8" is too big.

 

[Stu]

Are they easy to get in and out of the stem. Also any place you recommend buying them from?

I got all mine from Underdog Dave. His replacement screens fit perfectly, so I bought a bunch from him. I can send you a few if you PM me your address (like I said.... I bought a bunch and won't use them all).

 

[wilvape]

Thanks Stu! You just confirmed what I thought already, 5/8" is too big.

They go in very easy, the stem itself is approx 5/8" dia. so all I do is line up the screen dia. with the outside of stem, take a pencil (flat end) , it is easy to hold it in the the center of screen and push in, the edge forms itself tight in the bowl and does not move , I believe because the dia. is the same it is easier to hold and line up to stem than the 1/2" would be. If I ever require more screens I will order 5/8" again , I have the brass screens if it makes a difference.

 

[vape4life]

I've used the brass but wasn't too thrilled, although they are super flexible. I liked the Planet Vape Solo screens, I thought the size was "perfect"...slight dome, push in, and then press to the height you want.

 

[Dreamerr]

I have been cutting screens and ever so slightly domed. I then took the same screen I used to cut and put it in and I love the air flow but not so much the smaller bowl but it is ok. The screen size on the card board is .625. I didn't have to do anything, just fold them in and had a perfect dome. I ordered pv screens for the solo and should be here by Monday if you want me to compare them for you. Just let me know.

 

[ataxian]

I've used the brass but wasn't too thrilled, although they are super flexible. I liked the Planet Vape Solo screens, I thought the size was "perfect"...slight dome, push in, and then press to the height you want.

The Planet Vape screens fit perfectly plus they last so long!
I haven't tried my economy pack from EBAY.
Guess I need to compare plus the mesh size is different between the two.
With PLANET VAPES you can't go wrong.

 

[al bundy]

I got all mine from Underdog Dave. His replacement screens fit perfectly, so I bought a bunch from him. I can send you a few if you PM me your address (like I said.... I bought a bunch and won't use them all).

Which screen type did you order? Theres three choices.
They look really fine.

 

[vape4life]

The Planet Vape screens fit perfectly plus they last so long!
I haven't tried my economy pack from EBAY.
Guess I need to compare plus the mesh size is different between the two.
With PLANET VAPES you can't go wrong.

WAY too expensive....I got 100 on eBay for a few bucks.....a few bucks gets you 5 at PV. Can you please measure the PV screens, are they 1/2"?

 

[Stu]

Which screen type did you order? Theres three choices.
They look really fine.

You want the screens for silicone stems on Dave's website.

 

[Frotwente]

What are burn off sessions? I thought the first couple out of the box cycles on 7 did the trick for good? Also what is the best way to hit this thing. I vaped 2 stems before from 3-5 and i am high but not booted. I was taking 6-10 sec pulls and saw a bit of vapor especially on 5

 

[jambandphan03]

slow easy pulls, and hold it in a bit, it's not smoke, so you want it to absorb. It will not hit you hard all at once, like combustion, it is more of a creeper sensation, that comes on over a bit of time. Also depends on the quality of your herbs as to how well they will work.

 

[ataxian]

You want the screens for silicone stems on Dave's website.

1/2" screens used.
Looks like I need to do a ISO cleaning.
NEW OG works well in a SOLO.
Having two stems ready is nice.
Travel tubes have saved my stems!
CO2 OIL in a PERSEI cart is a very good companion to a SOLO session!

 

[Armerad]

Just hit me how long it has been since I did a full bowl of the Solo. I have my screens set up so that the the screen sits flush with the PVHES notches, meaning the entire bowl is only like 1/8" thick, for very efficient and evenly cooked bowls.

 

[grassyRoots]

ataxian I do clean most of my stuff in iso and that is fine. I am confused why you don't understand what I am trying to do. I know I am not clear sometimes. All I am doing is letting one stem get oily to try the hot chocolate. I have never reclaimed before so will have to go look at the threads about what to do with it. I am not going to do anything like qwiso or bho and blow myself up hehe. I don't think there is enough oil in stems to actually make edibles unless you are making a single serve of something.

The other thing that may be confusing you is that I am ordering regular drinking straws and trying to mod them for the solo and the INH just for a longer glass air path.

I am a big fan of reclaiming. I had 6 stems and made 2 quarts of icecream (highcream) with it and loads of doses. A friends of mine always splits his stem with someone too strong since the first time he tried it alone and had a fun 12 hour journey. Enjoy!

According to my tracking email the Pelican 1300 case I ordered from Amazon was just delivered to my home. It might be a little bigger than you are looking for, though. I can post some pics later this evening after I get it set up if anyone is interested.

Funny, Several people are now talking about pelican cases.... I just bough one from a shop where I live. I bought the 1120, fits the solo, several stem(stacked) My large space case and a small jam jar. With more room to add on. I will send pictures when I can.

Here is the Pelican 1120

mod note: Please avoid back-to-back posts, use Edit instead. Three posts merged and one deleted.

 

[ehakim]

My custom double lenght pvhes came in the mail today

The vapecase fits my solo 3 stems a 4 pc grinder and my abv

 

[b0]

I will have to buy some PVHES for me. Both of the stems in my solo fall off, if it wasn't for that I almost always use my GonGPHE I would be damned...

 

[Bouldorado]

I will have to buy some PVHES for me. Both of the stems in my solo fall off, if it wasn't for that I almost always use my GonGPHE I would be damned...

You should try the o-ring mod discussed recently; it'd be a lot cheaper than buying new stems

 

[mvapes]

Just hit me how long it has been since I did a full bowl of the Solo. I have my screens set up so that the the screen sits flush with the PVHES notches, meaning the entire bowl is only like 1/8" thick, for very efficient and evenly cooked bowls.

Is that getting you where you need to be? It seems like such a small amount? I have to give that a shot.

 

[b0]

I saw black o-rings around here, but I'm not sure about their heat resistance. I'm trying to find the orange ones, but can't find them.

 

[Vitolo]

My custom double lenght pvhes came in the mail today

Hey Dreamerr.... check it out!

 

[Dreamerr]

I know I love it more then you know. I hope the glass straws will work otherwise I am sure that custom stem is expensive and I don't know if I am willing to pay for that.

ehakim how much did it cost? To bad my order is on its way or I may have added it. How long it is?

 

[mvapes]

Hey Dreamerr.... check it out!

I see your schwartz is as big as mine.......

My custom double lenght pvhes came in the mail today

The vapecase fits my solo 3 stems a 4 pc grinder and my abv

I see your schwartz is as big as mine.....

 

[ehakim]

I

I know I love it more then you know. I hope the glass straws will work otherwise I am sure that custom stem is expensive and I don't know if I am willing to pay for that.

ehakim how much did it cost? To bad my order is on its way or I may have added it. How long it is?

It's actually only 10$ more than a normal PVHES stem so 30$ and it measures 22 cm exactly double the length of the normal stem