I was surprised to find that the straight stems seem to collect resin on par with the bent stems. I assumed that without the bend, the straight stems would collect less, however IME this has not been the case.
Arizer Solo
- Thread starter Rockwise
- Start date
-
- Tags
- arizer battery powered
MacNcheesePLZ
HI-Temp Vaporist
Panic mode! My solo is not turning on at all 
I don't have access to a charger right now but it was fully juiced when I left. I bought thru pv so at least that's a weight off my chest.
Edit: its working now! My advice is never leave your solo in a hot car ;-) I'm impressed that it kept ticking.
I don't have access to a charger right now but it was fully juiced when I left. I bought thru pv so at least that's a weight off my chest.Edit: its working now! My advice is never leave your solo in a hot car ;-) I'm impressed that it kept ticking.
poonman
Well-Known Member
Thank you for clarifying v ,
So it's not like my NO2 where you can use while charging .
Don't matter , I still bought it , because you suggested it
Payment just got confirmed with PIU .
Yippee
lettherebedanks
Member
Just need to chime in and say I've really been enjoying the Solo. I can hardly believe how long these sessions are and how much less bud I use compared to smoking. I've used the MFLB and other vapes, but the solo gives such a steady, consistent, and accurate heat it's on a totally different level.
nugghuffer
vaked
Aight so my Solo will be here Friday according to the tracking info...I've been reading about this new GonG adapter that PlanetVape is making but does anyone know how it's going to be different than the one that is currently on their website?
jambandphan03
in flavor country
They cut air channels into the stem to increase airflow so you get a better hit, at least that seems to be popular opinion.
m0sh
Singer Song Writer Stoner
lol its not a popular opinion its physics
anyway, when the draw is restricted its just harder to get a good hit, you have to drag harder
also, try inhaling air with the stock stem and the improved stem and you'll notice how uncomfortable is to suck air restricted like that...I think its even not healthy...
jambandphan03
in flavor country
well, I just know there was mention that the PVHES did not work for at least one person, that they preferred the tighter draw of the stock stems, so I didn't want to exclude their opinion. I on the other hand I LOVE my PVHES and can't wait for the GonG!!
m0sh
Singer Song Writer Stoner
The results with a restricted draw are not as good, but you should know how to use the improved stem...usually it takes a bit time before you get the full power big hits
I use Iso in a ziplock bag, shake shake shake, or soak, and run through hot water and they are like new. I air dry or roll up a single paper towel sheet to dry.
I've used the hot chocolate method successfully many times too but i'm anal and like my stems to be clean like all the time so I usually don't let them get all gummed up for that.
I've used the hot chocolate method successfully many times too but i'm anal and like my stems to be clean like all the time so I usually don't let them get all gummed up for that.
poonman
Well-Known Member
The results with a restricted draw are not as good, but you should know how to use the improved stem...usually it takes a bit time before you get the full power big hits
Wasn't that the reason they switched from the 2 holes stems to the 4 holes stems ?
PIU told me , I'll be getting the 4 holes stems , 1 straight and 1 bent .
I've already made plans to order the PHVES 2 holes stems , once I get the Solo .
Should I order the 4 holes too ?
Are they that much better ?
I'm guessing having extra stems is the way to go , just like having extra batteries
for the mflb .
But no wood yet ..." that's what she said "
The results with a restricted draw are not as good, but you should know how to use the improved stem...usually it takes a bit time before you get the full power big hits
How do you use the PVHES then? Is there a technique? I know when I was a beta testing PV's turbo stem I still had to rock it back and forth to maximize the advantage of the full open bore, but then again it didn't have the notches or grooves to improve airflow. I figured the new PVHES are fool proof?
I'd say no, either with the unit upright it will run down into the bowl past your herbs (if you mix), or if you use it inverted it will simply run back down into the stem, like the oil resin builds up. I've tried it. Hash or bubble hash and kif work great though, or even maybe a drop or two of oil, but $90/g wax of budda, i wouldn't.
Wasn't that the reason they switched from the 2 holes stems to the 4 holes stems ?
PIU told me , I'll be getting the 4 holes stems , 1 straight and 1 bent .
I've already made plans to order the PHVES 2 holes stems , once I get the Solo .
Should I order the 4 holes too ?
Are they that much better ?
I'm guessing having extra stems is the way to go , just like having extra batteries
for the mflb .
But no wood yet ..." that's what she said "
Pretty sure the PVHES is either 4 hole or turbo "full open bore" and PV plans to only keep producing the 4 hole, because there wasn't enough difference to justify the cost of the turbo since performance was the same. Please correct me if i'm wrong, but I believe there is no 2 hole PVHES.
m0sh
Singer Song Writer Stoner
Wasn't that the reason they switched from the 2 holes stems to the 4 holes stems ?
PIU told me , I'll be getting the 4 holes stems , 1 straight and 1 bent .
I've already made plans to order the PHVES 2 holes stems , once I get the Solo .
Should I order the 4 holes too ?
Are they that much better ?
I'm guessing having extra stems is the way to go , just like having extra batteries
for the mflb .
But no wood yet ..." that's what she said "
I have no idea about the reason but there is a limit to how much air u can pull through the heating elements and still have great results...
I can tell you that the wood has 1 hole and it takes few mins to get thick heats and you just have to be patience and have slow draws...
Nothing to worry about PV gives a note with some tips on how to use (can someone post the note? I must have lost it)
Basically just wait from an hit to an hit about 30 seconds ...
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
IMO, why to wait for PV to release a simple mod. DIY and save $$$$$
Dremmel the 4 or 2 hole glass screen from the bent and straight.
Airflow really changes. It's like day and night IMO. If PV don't see any difference in airflow between no screen and regular Solo stems they really need to test more.
BTW, new comers are politely welcomed again to read the whole thread again
As well, someone nicely set Vaporpedia.
Do yourself a favor, read to not repeat questions thanks
Dremmel the 4 or 2 hole glass screen from the bent and straight.
Airflow really changes. It's like day and night IMO. If PV don't see any difference in airflow between no screen and regular Solo stems they really need to test more.
BTW, new comers are politely welcomed again to read the whole thread again
As well, someone nicely set Vaporpedia.
Do yourself a favor, read to not repeat questions
thanks
m0sh
Singer Song Writer Stoner
Well first off I'm using my solo with this setup (thanks jrr
)What I mean, IMO it takes a bit more to heat up the wood chamber (more time for the temperature to drop as well), so with my method it will take few hits until you get a massive cloud and with the PVHES you wait a bit less...
Once the SS is hot, it delivers fine hits...even sometimes I feel bit harshness with the hit...the temp does drop but inside the heating element...chamber stays hot as hell!
Easier said then done...would if I could
IMO, why to wait for PV to release a simple mod. DIY and save $$$$$
Dremmel the 4 or 2 hole glass screen from the bent and straight.
Airflow really changes. It's like day and night IMO. If PV don't see any difference in airflow between no screen and regular Solo stems they really need to test more.
BTW, new comers are politely welcomed again to read the whole thread again
As well, someone nicely set Vaporpedia.
Do yourself a favor, read to avoid posting more questionsssss
Because for one many of use down own Dremmel's and are not about to buy one just to do this. Secondly because it takes some skill and i'm sure many would fuck up their stems.
They are what $18? That's $8 more than a stock stem, I think i'll just pay PV to have them done for me, and that way they can make some money to keep their awesome business open for us!
I agree about the new comers, I see the same questions over and over and over... the best ones are the ones that are already answered the the exact same page or maybe one back lol
EDIT: Thanks Mosh, I know what you mean now...
Zangano Cruel
IG zan.cru (code) zancru (5% NV checkout discount)
Someone, friend, neighbor, cousin, relatives, a doctor, your dispensary.Well first off I'm using my solo with this setup (thanks jrr
Now every hit I pull my stem out (with the wood I can hold the glass with one hand-no silicon yay)
What I mean, IMO it takes a bit more to heat up the wood chamber (more time for the temperature to drop as well), so with my method it will take few hits until you get a massive cloud and with the PVHES you wait a bit less...
Once the SS is hot, it delivers fine hits...even sometimes I feel bit harshness with the hit...the temp does drop but inside the heating element...chamber stays hot as hell!
Easier said then done...would if I could
I'll do it myself for you, if you pay the mail
or if you are in the area. I know many people have medical problems, like arthritis or spascisity or physical hands related problems, but there's always someone ready to help.
As I told you before, I'll do it for you.
PM me!!
Dremmel are getting cheaper and cheaper. I know some people don't need a Dremmel , but someone needs to have one. It's an awesome tool. Drill?? Regular drill would make it too. Everybody in the neighborhood has a drill.
Sorry, it's just me against spending more money in things I can DIM. Besides PV is always out of stock.
GoodDecisions
The Best of Decisions
Been reading this thread for weeks and finally decided to make an account! I'm planning on ordering my Solo within the next week or so - very excited to own one of these!
Looking forward to contributing to this great community.
Looking forward to contributing to this great community.
I have a drill, yet wouldn't go near my glass stem with it. You are right on the stock bit, but it's a brand new product so hopefully once they get going they stay going, like the gong's.
Frederick McGuire
Aggressively Loungey
I used a drill and a dremmel cutting disc for making my shorty stem (a bent stem cut just below the bend
)
It wasn't particularly hard, but the experience certainly makes me prefer buying them pre-done.
)It wasn't particularly hard, but the experience certainly makes me prefer buying them pre-done.
Drxx
Member
BTW, new comers are politely welcomed again to read the whole thread again
As well, someone nicely set Vaporpedia.
Do yourself a favor, read to not repeat questions
The vaporpedia entry is still very early in its development and doesn't address many of the questions that I've seen asked.
An issue with the solo that I've come across by just reading around is that the model/serial number throws many off because of the different stems that are packaged with it and the initial changes that early models displayed.
With that being said, I agree with you on reading up. But you need to cut some newbies some slack because they join the community, see all this confusion, and assume their units are different.
Consequently, you vets get repeat questions because of it.