Arizer Solo

Frederick McGuire

Aggressively Loungey
A little bit of 7th floor tubing will fit around the solo stem, and the base of the aqua vape.
I also have some medical grade silicone tubing, with the same O/D as 7th floor, but a slightly thinner wall, and hat also fits well.
I can see if I can take a pic a bit later.
 
Frederick McGuire,

Jhonny

Well-Known Member
wait so even the new M107s have the robot fart smell...?

i havent been in this forum in a minute, but i thought that the newer robots were not farting...?

im close to ordering one, but def dont want it if its gonna smell like that

I have good news!!!

Cleaned my solo with cotton swaps and iso (just the upper side), used the solo the whole evening with friends and the disturbing robot-fart/electonic-plastic smell is now gone!

Will keep my solo and will not bring back it to my friends headshop as I said yesterday :D


p.s. thanks for your help guys
 
Jhonny,
  • Like
Reactions: rufrothy

darco

Well-Known Member
Hello fellow Solo users,

Its been quite a few months since I wrote my review of the solo here http://www.fuckcombustion.com/threads/arizer-solo.3833/page-35#post-162255 I have an m 102 and have been using it since the last 6 to 8 months. It has a ceramic bowl which has chipped and does give off some smell. However, the Solo still is the winning portable vape in my books. I have been trying to get in touch with Arizer wondering if my Solo chipping is covered under warranty, but havent received a response from them after 2 mails.

So now I have been looking for another vape, and from what I see in the market, I think I will get another solo. So for the more updated people here, I have a few questions:

I dislike the tight draw of the solo. I used my NO2 over the Solo just to have a relaxed draw. Does the 4 hole stem improve the draw? Does the new SS bowl improve the draw?

Has anyone faced any drawbacks of the SS bowl compared to the ceramic?

Do I specifically need to order for a SS bowl version or are all bowls SS now?

Well thats a lot of questions :) Hope someone can help

About cleaning the stems, I have had incredibly dirty stems, dunno if its because of the kind of herbs I use or its because I just vape too much. I have tried everything possible, Isopropyl Alcohol, salt, vinegar, boiling, long term soaking, etc. Nothing has ever come close to the performance of my Ultrasonic cleaner! I recently got one from Amazon to clean my ecig attys and used it to clean my Solo stems. Earlier half my stem was nearly opaque with gunk, and now it looks like I just bought a new one! Seriously its that good! Just use some dishwashing liquid soap with it and give it about 5 cycles.
 

Gonzo

Slightly Stoopid
420 cleaner will do the same job in 1 minute if your not interested in reclaiming :rockon:
 
Gonzo,

WatTyler

Revolting Peasant
I have been trying to get in touch with Arizer wondering if my Solo chipping is covered under warranty, but havent received a response from them after 2 mails.

So now I have been looking for another vape, and from what I see in the market, I think I will get another solo. ....
Hey Darco, don't give up. They can only ignore you if you let them. You purchased a vape with a warranty- insist upon using it you feel that your vape is visibly faulty. They can't argue flaking is not a warranty issue. Although by the sounds of it I'd now expect to be paying the shipping both ways. I certainly wouldn't be buying another from them just because they ignored your issues with the first- that's rewarding bad service.

I think they're all SS now. I have to be honest I have both 2 and 4 hole stems and I don't really care which pick up. 4 hole is a freer draw, but I don't find the differences all that significant- they both work adequately.

420 cleaner will do the same job in 1 minute if your not interested in reclaiming :rockon:

Cutlery tray in the Dishwasher for me. Chuck it in at night and I don't even have to think about it.:tup:
 
WatTyler,

Robob

Veteran Vaporist
My M105 came from easyvape on amazon, used for a few days and battery would not charge. I was misled by the claim that they had "the latest units" for only $160, same pic above and everything.
Do yourself a favor and spend the extra $ to get it from one of the more respectable sellers like vapornation.

The 105 still works fine on the a\c adapter for heating, just waiting on a battery to replace the old one. Also the 107 does seem to have better air flow, feels like your not sucking as hard to get the clouds you like!
 
Robob,

Kuroth1

Get your Freak on....
My M105 came from easyvape on amazon, used for a few days and battery would not charge. I was misled by the claim that they had "the latest units" for only $160, same pic above and everything.
Do yourself a favor and spend the extra $ to get it from one of the more respectable sellers like vapornation.

The 105 still works fine on the a\c adapter for heating, just waiting on a battery to replace the old one. Also the 107 does seem to have better air flow, feels like your not sucking as hard to get the clouds you like!


Just ordered mine from PlanetVape with discount code.. And emailed them and they said for sure I would be getting the M107 silver one.. Really nice people..
 
Kuroth1,

Kuroth1

Get your Freak on....
Question.. How long on Avg should the life of the battery be? And can we change the battery our self or do we have to send it back for new battery?

Thanks!
 
Kuroth1,

jambandphan03

in flavor country
Question.. How long on Avg should the life of the battery be? And can we change the battery our self or do we have to send it back for new battery?

Thanks!

Not sure on how long the life is, but there is a way to replace it when it does fail. There were a couple of folks here saying they were going to replace and make a video or take pics of the process in the last few days, so stick around if you want to see the process, if they actually do post about it. I found the replacement battery on Amazon.
 
jambandphan03,

WatTyler

Revolting Peasant
wat how dirty are your stems when you use the dishwasher?
Nowadays I do it quite regularly and so they're fairly clean when they go in- it usually get's it totally sparkling clean like this. I have put them in when they're filthy as well- occasionally it won't get it totally spotless, but it's normally well softened bits of plant matter and just rinses out with water.
 
WatTyler,

steiner666

Serial vapist
IMG_20120309_200727.jpg


Absolutely LOVING my GonG stem. I loved bonging with the solo before, but now its PERFECT. Big thanks to planetvape.ca for making my dreams come true with this! It's made exactly how i've been wanting a stem to be made ever since i got the solo... no, before even that. I've wanted a stem like this for many vapes, for many years. Easy one-hand operation, the solo is stable as hell perched on top of the stem, as you can see, and of course a perfect airtight seal

:D couldnt be happier. havent been showin up around here much lately cause ive been so damn content with what i've got goin on vapewise these days. Only gripe i have still is that the AC adapter does still slip out of the jack enough to lose the power connection when im running it on AC power, which is rarely tbh.
 

Kuroth1

Get your Freak on....
IMG_20120309_200727.jpg


Absolutely LOVING my GonG stem. I loved bonging with the solo before, but now its PERFECT. Big thanks to planetvape.ca for making my dreams come true with this! It's made exactly how i've been wanting a stem to be made ever since i got the solo... no, before even that. I've wanted a stem like this for many vapes, for many years. Easy one-hand operation, the solo is stable as hell perched on top of the stem, as you can see, and of course a perfect airtight seal

:D couldnt be happier. havent been showin up around here much lately cause ive been so damn content with what i've got goin on vapewise these days. Only gripe i have still is that the AC adapter does still slip out of the jack enough to lose the power connection when im running it on AC power, which is rarely tbh.



VERY cool BUT what stem did you order on PV??? What exactly is it called??? And does it work on any Bong basically??? What Bong is that in the Pic??? Did you get everything to do the from PV??
If so what all do I need(part numbers, names) to make the same thing... :)

Sorry for all my Noob questions..


Oh and you had a MFLB.... How do you rate the solo vs the MFLB???? I am hoping the Solo is a replacement for my MFLB...
 
Kuroth1,

ilovebOObs

can i stick my male joint in there?
wow that was fast, sold out again.
the gong size is the size of your hole in your bong where you put your slide/bowl. if its the size of a nickel its an 18mm if it like a dime its a 14mm. i hope that is easy enough to understand.

if you really wanna be safe get a reducer or an expander to.
if you get a 14mm get a 18mm to 14mm reducer, then you can use on both size.
if you get 18mm get a 14mm to 18mm expander, and you can use on both.
or just get both 14mm/188mm gongs :)
 
ilovebOObs,
  • Like
Reactions: WeayLay

Kuroth1

Get your Freak on....
wow that was fast, sold out again.
the gong size is the size of your hole in your bong where you put your slide/bowl. if its the size of a nickel its an 18mm if it like a dime its a 14mm. i hope that is easy enough to understand.

if you really wanna be safe get a reducer or an expander to.
if you get a 14mm get a 18mm to 14mm reducer, then you can use on both size.
if you get 18mm get a 14mm to 18mm expander, and you can use on both.
or just get both 14mm/188mm gongs :)


That you sir...
 
Kuroth1,

Kuroth1

Get your Freak on....
wow that was fast, sold out again.
the gong size is the size of your hole in your bong where you put your slide/bowl. if its the size of a nickel its an 18mm if it like a dime its a 14mm. i hope that is easy enough to understand.

if you really wanna be safe get a reducer or an expander to.
if you get a 14mm get a 18mm to 14mm reducer, then you can use on both size.
if you get 18mm get a 14mm to 18mm expander, and you can use on both.
or just get both 14mm/188mm gongs :)


Oh I see you also have(had) a MFLB... So now that my Solo is on order from PV I am very excited to find out if it will replace my MFLB??? I assume you like your Solo a lot better than your MFLB??? What do you like better???

Thanks!
 
Kuroth1,

ilovebOObs

can i stick my male joint in there?
as you can see its retired, i keep it for sentimental reasons, hahah i could never get huge hit from the MLFB, it did get me stoned but for me it was alot of work just to get ripped. plus i hated carrying around a pocket full of batteries, i really wanted to love it but never did.

the solo on the other hand is cake to use. turn on set temp and rip away, i get huge clouds without even trying its a real monster of a portable. i converted a few smoker to vaporer ( is that a word) hahah, with the solo. it handles groups of people like nothing else. its a beast and i never leave home without it.
 
ilovebOObs,
  • Like
Reactions: rufrothy

Kuroth1

Get your Freak on....
as you can see its retired, i keep it for sentimental reasons, hahah i could never get huge hit from the MLFB, it did get me stoned but for me it was alot of work just to get ripped. plus i hated carrying around a pocket full of batteries, i really wanted to love it but never did.

the solo on the other hand is cake to use. turn on set temp and rip away, i get huge clouds without even trying its a real monster of a portable. i converted a few smoker to vaporer ( is that a word) hahah, with the solo. it handles groups of people like nothing else. its a beast and i never leave home without it.


Sweet exactly what I was hoping.. I too had the same issues as you with my MFLB... But it does hold a special place in my Heart and I too will keep mine.. LOL
 
Kuroth1,

ilovebOObs

can i stick my male joint in there?
also PV is pretty cool, i'm sure if you respond in your order email that your looking for the gong piece, he will hold one for you.
 
ilovebOObs,
Top Bottom