Arizer Solo

CarolKing

CarolKing

Singer of songs and a vapor connoisseur
I may just do that. Pipes stand might do the trick. It might help her bottom.

I've tried Orange Kush, Orange Crush I'll have to look for. I have some Blackberry Kush right now and some Sugar Goo. I needed help with sleep and these are the strains they gave me. I have some other strains that work better for day.
 
OF

OF

Well-Known Member
Quetzalcoatl said:
I haven't had this particular strain, but I did have CannaQuin, a cross between Cannatonic and Harlequin, two excellent strains. Didn't get me high at all but it was like vaporizing Vicodin :razz: You're up north some, have you tried ACDC? I've heard about it, seems to be the new high CBD strain.
Click to expand...

Agreed. Harlequin was my 'go to serious meds' until Cannatonic came along. IMO it's even more effective (higher CBD/THC ratio), but a cross of the two is not to be discounted I bet.

Have not seen/tried ACDC, will look, thanks for the tip. I got spoiled a while back. A dispensary over on the coast generally has it, it's a long drive for me, but they'll hold an ounce or two if you ask nice......
http://www.capitolahealers.com/flower-menu.html

It's usually in stock as well......

OF
 
E

exit

Well-Known Member
CarolKing said:
I may just do that. Pipes stand might do the trick. It might help her bottom.
Click to expand...

Funny you say this. For a long time I thought the pipes stand was kind of neat but unnecessary. Meanwhile I always had my solos charging on their sides. I figured it works already so who care?

I decided to just get one since I bought a pipes AIO kit with the rainbow LED and I am already plotting to order a second so I don't have to bring mine around all the time. It's truly a high quality accessory and a worthy investment for anyone who uses their solo frequently enough to put it to use.

IMO it is a testament to the quality of the solo if the thread spend much time deliberating strains instead of vape problems.
 
ataxian

ataxian

PALE BLUE DOT
I
Quetzalcoatl said:
I am, chronic pain and nausea. Migraines I haven't had in some time now thankfully. I haven't had this particular strain, but I did have CannaQuin, a cross between Cannatonic and Harlequin, two excellent strains. Didn't get me high at all but it was like vaporizing Vicodin :razz: You're up north some, have you tried ACDC? I've heard about it, seems to be the new high CBD strain.

Not sure if any of you heard, but a new bill is being introduced to the US House of Reps about trying to make some very low-THC/high-CBD strains legal for medical use.

http://www.cnn.com/2014/07/28/health/federal-marijuana-bill/index.html

Hopefully something good comes out of it.
Click to expand...
I know this is the SOLO tread!

PINEAPPLE KUSH for WAKE & VAKE!

Time for a GONG!

So level 2?
I'll try that thank you!
CarolKing said:
My base plate is chipping off on my newer model Solo, almost half way around. Eventually the whole bottom will be chipped. I didn't notice any cracking in the beginning. Then kinda forgot about checking. Then a piece broke off, then a bigger piece broke. It isn't exposing anything, I don't think. I will see how things go. I hate to send it back. It doesn't affect the use at all.

I've never used an o-ring once with this. I do have one on my older model and no chipping on that Solo.
Click to expand...
@Ratchett since you have a 3D printer I have an IDEAL?

Why not use an ABS or whatever to make replacement parts for the SOLO {bottom plate on the new models are defected} FYI

Take a new model and remove the bottom plate.
Scan and make a computer model.
Or just draw one in a cad program?
Sell a repair kit?
(screw driver to remove 4 machine screws, replacement plate) @Pipes could supply the stands or you can make them for him? @OF could post how to make the repair? @Snappo could be a sales rep? Call the company: COVER your A@@!

Could just be the new batch of GSC making me think: OUT lOud!
 
Last edited:
H

HomeFree

Well-Known Member
I get great vapor and flavor from cannatonic, Stu. It's a great tasting strain. You wouldn't know it was a CBD strain, until you vaped a bunch. It gives me an energy boost. I wish it would get me a little bit more stoned although it does have a mild stoning effect... it's still somewhat enjoyable though. The stuff makes me talk, and talk, and talk.... Harlequin I found better for at night, it makes me sleepy.

I tried C-6 which I believe is the same thing as AC/DC, did not like it, made me feel like a zombie, even the next day, I was dragging my feet (literally, my toes kept dragging as I was walking the next day) That strain felt the opposite of medicinal, it almost made me feel like I took an antipsychotic or something.

I have read that the true therapeutic dose of CBD is in the hundreds of milligrams. That's quite a bit of flower.

I don't know what to think of the cbd strains. To me, thc rich cannabis is medicinal. To others, maybe they find some use in them, as an anti-inflammatory or something.

I am saving the last of my cannatonic to see if it works on nausea to vape before work, thankfully I have not had any in several months.

Does anyone use their Solo with tobacco?
 
OF

OF

Well-Known Member
HomeFree said:
I am saving the last of my cannatonic to see if it works on nausea to vape before work, thankfully I have not had any in several months.
Click to expand...

Good call. Funny, back before I retired just thinking about going to work made me nauseous......I could have gone through a bunch of this.

I agree, it's probably mostly a MMJ thing, the not getting so stoned is a feature there sometimes. It lets you function, at least it does me.

For sure not for everyone, but expect it to have some seriously dedicated fans.

I keep half a dozen or so strains in 'doob tubes' processed and ready to go, rubber banded together. Cannatonic is one of 'em. Insurance.

OF
 
biohacker

biohacker

H.R.E.A.M
Faaaaack, after a couple of weeks I am starting to see little stress fissures/cracks around the bottom plate screws :( I've been handling it carefully more or less, and use an o-ring but never over tighten.
 
biohacker,
  • Like
Reactions: ataxian
oldspice

oldspice

Well-Known Member
HomeFree said:
Does anyone use their Solo with tobacco?
Click to expand...
I've never vaped tobacco on its own in my solo, but I did throw in a mix of weed with a minimal amount of tobacco that was left over. The vapor tasted nasty and was really harsh, let alone the uncomfortable nicotine buzz. I was also afraid it was going to ruin my reclaim hash by adding nicotine to it.
 
Quetzalcoatl

Quetzalcoatl

DEADY GUERRERO/DIRT COBAIN/GEORGE KUSH
exit said:
Because of your posting I use level 4 more than ever now!
It makes me cough up a lung!

But level 2?
What is this sorcery????
Before I know it you are going to be vaping by holding the nugs in the sun!
Click to expand...
You don't get high smelling your nugs???

Level 2 with "old" Solos = ridiculous flavor. Instead of cotton mouth I salivate thinking about all the delicious terpenes :drool:
 
W

waaldron

Active Member
Hey guys. My solo recently started acting up. On the LED it will only read one, but if I set the heat anywhere past one it will heat up to the highest temperature and combust the weed. I can sort of use it by switching back and fourth between the idle LED and two. My model is M1A4
 
waaldron,
CarolKing

CarolKing

Singer of songs and a vapor connoisseur
waaldron said:
Hey guys. My solo recently started acting up. On the LED it will only read one, but if I set the heat anywhere past one it will heat up to the highest temperature and combust the weed. I can sort of use it by switching back and fourth between the idle LED and two. My model is M1A4
Click to expand...
I Hope you bought your unit through a vendor on this site. It looks like you need to contact who you bought your vape from. Sounds like something faulty is going on. You may need to get another one.

Hopefully, things will work out.:leaf::peace:
 
ataxian

ataxian

PALE BLUE DOT
exit said:
Because of your posting I use level 4 more than ever now!
It makes me cough up a lung!

But level 2?
What is this sorcery????
Before I know it you are going to be vaping by holding the nugs in the sun!
Click to expand...
Back on 4!

4 seesions per hour.
I love these 2 new strains.
GSC and PK (pineapple kush)

This bubbler was only $22 bucks so if I drop it I worry more about the floor than this cheap device. At least it medicates!
x7mA5Fg.jpg

Level 4 was hot enough!
Quetzalcoatl said:
You don't get high smelling your nugs???

Level 2 with "old" Solos = ridiculous flavor. Instead of cotton mouth I salivate thinking about all the delicious terpenes :drool:
Click to expand...
Yesterday I had a few stems on level 2 and it was good!

Today I was on 4 all day and it was good.

I vaporized a lot today and it was good.

Both my strains I love and they are good.

My SOLO medicates and this is good.

Cannabis is good!

@Quetzalcoatl sometimes I don't even turn the SOLO on and just breath the flavor!

It's that good!
 
Last edited:
samantabha

samantabha

climbing the mountain of the mind
Company Rep
poonman said:
You want to avoid bits of herbs falling down in the 4 holes of the oven .
Some use the double screen method , sandwiching the herbs in between 2 screens . Others have inserted a screen ( glass ) inside the oven before
inserting the stem .

As for cleaning the glass stems , you can soak the stems over night in iso
or I like to add some salt and iso in the stems and do a few shakes before
soaking them . I find it helps in removing all the caked on resins and speeds up the process . ( 1 hour soaking )

This is a thread made for ' show n tell '
here you go , I prefer uploading to imgur .
http://fuckcombustion.com/threads/how-to-post-pictures.155/
Click to expand...
Thanks, Poonman! My first effort will be to find some smaller screens. I will try to the method for cleaning too. I was able to rinse out the tube pretty well but it could use a little more cleansing action.
 
ataxian

ataxian

PALE BLUE DOT
samantabha said:
Thanks, Poonman! My first effort will be to find some smaller screens. I will try to the method for cleaning too. I was able to rinse out the tube pretty well but it could use a little more cleansing action.
Click to expand...
Listen to @poonman he knows!

I'm learning everyday however there's a few things that work in my case.
This may not work for you?
Check with someone who knows?

I use 1/2" screens from ebay.
Glass screens I have locked in a few GonG's.
(that's a different subject and not my invention at all but I love it!)

I clean my glass were it sparkles.
There is not a right or wrong way to clean.
Whatever you have to clean and some patience.

BASIC
PBW -(ebay 1 pound will get you started and supplied for a very long time.)
98f (36.6c) water I just use tap on this set.

2 teaspoon's (round) PBW I sprinkle into the glass piecing I'm cleaning at the time.
This for 3 or 4 water rigs, adapters, stems, GonG'S, whatever.
I use a 5 gallon paint pail from HOME DEPOT and with the glass pieces in place fill with warm water (98f) + or - 3 degrees (36 - 37c)

Sprinkle 2 more round tea spoon's into the water or the covered glass with PBW.

Let it soak for an hour or whatever is your schedule (over night if you like)
I do it this way because people say they get streaks on their glass with their method?
So I just follow my program and it's worked well so far.

Rinse

I can use warm water 98F

I Break glass like nobodies business so I take one piece at a time to deal with.
Rinse with warm water first
2nd Rinse with reverse osmosis or distilled. Clean drinking water works.

OPTIONAL
Before I begin I "pre-clean" with a simple cheap method.

Baking Soda 1/2 cup
White Vinegar 4 cups or more
COSTCO BULK is CHEAP
The same 5 gallon pail

The BS (no joke) I sprinkle in the glass and fittings. (1/4 cup)
Fill with 1 cup into cavity of glass pieces the BS.
Spread the remainder of the BS over your pieces.
Pour the remainder of the Vinegar over the BS.
Soak for at least 1 hour or longer if you want.

Rinse and proceed to the Basic PWB step.

Closing step 100% Optional
You don't need this step either (over kill)
After the Basic STEP
I put everything clean back in the 5 gallon bucket
Take 2 or more citrus fruits (LIMES, GRAPEFRUIT, ORANGE, LEMON)
I have a few.
I cut the fruit in half and squeeze on to my glass pieces
Fill with clean pure water not tap! (cover your pieces with water)
15min soak is enough
Rinse
Towel dry or just let them air dry on a soft cloth.

This optional step is only if you are sensitive?
Otherwise skip it!

I forgot One more thing:

CANNABIS is the HOLY GRAIL!
CarolKing said:
Ataxian you do what it takes to feel better. The Solo will get you there.
Click to expand...
@CarolKing the MONSTER is trying to get me!

I woke up and had coffee!
Yesterday I vaked 1.5 grams of hybrid.
Today I feel amazing!
Before noon I will finish my project.
Goal = Believe and Succeed!
 
Last edited:
You must log in or register to reply here.
Top Bottom