AirVape Legacy Pro

jbm

jbm

Not a Vapman “beta tester”
Abysmal Vapor said:
9035de10-8522-4fa8-a2d5-be6213a33c92.png

Saw this today, if anyone is interested the promo is on the official site.
Click to expand...
Note that this is the previous model, the OG Legacy, NOT the Legacy Pro.
 
Last edited:
Vapetrees

Vapetrees

Vaped Out
Shorner said:
I can't believe Troy is still praising the Mighty though....IMO the airvape pro blows it away,
Click to expand...
The Mighty is amazing! The Airvape, well I have been using it more and more now. I have gotten the hang of it. The flavor is amazing. Honestly, better than the Mighty. However, the Mighty is easier to use and just works, and works well all the time.
Noah0608 said:
I have an still own a Mighty for 5 years, just bought a Legacy Pro. For me the Mighty is a bit better especially for the ease of use.
Click to expand...
I agree with you. The Mighty is easier to use but the AVP has amazing flavor. It does take a while, to extract on the first bowl in on demand mode but I guess that’s a common thing with convection vaporizers.

Having had the AVP for over a week now. I really do enjoy it. I don’t like how messy it gets though on the lid, but it’s not something that would keep me from buying it. Overall, I am happy with my purchase and I would recommend it to anyone who needs a new portable vaporizer. More testing, for science :science::science:
 
S

schenkadere

Well-Known Member
I'm likely selling my Pro. I like it well enough, but I really haven't been using it in lieu of my other vapes. Has anyone had good luck on the classifieds here? The FrientExchange on Reditt has been poop.
 
schenkadere,
K

kapows

Well-Known Member
schenkadere said:
I'm likely selling my Pro. I like it well enough, but I really haven't been using it in lieu of my other vapes. Has anyone had good luck on the classifieds here? The FrientExchange on Reditt has been poop.
Click to expand...
What do you use instead?


Yes the classifieds here is good. Ive made some purchases
 
X

XProMight

New Member
Archive said:
Did a deep cleaning today. Used some everclear to wipe everything down. I did encounter a bit of annoyance.

The bulk of the airpath from the oven to the mouthpiece is a glass tube inside the device which is easy to clean, but, there are two small sections where the vapor goes through plastic and some kind of rubber/silicon gasket. As far as I can tell, the rubber/silicon parts aren't removable, and due to the way the channel turns at a near right-angle, there's no good way to completely clean inside those passages. I ended up shoving a small q-tip in there from different angles to clean it out as best I could, but I'm sure it's still dirty in there (I can smell it).

Since those channels are part of the body of the device, I can't take it out to soak it in ethanol or anything like that. It would be nice if the entire airpath was removable for proper perfect cleaning. For me, a "perfect" device is going to have as close to an all-glass airpath as possible, and the entire airpath should be easily removable/cleanable/soakable. You can't do that with an ALP.

Anyway, maybe that's an upgrade for a future airvape.

As for today's session...

I cleaned the ALP up because I got my hands on some absolutely gorgeous fresh Black Jack. Taking a cue from someone above in the thread, I filled the bowl about 2/3rd of the way with a light tamp, then placed the concentrate pad on top of the flower. It sat roughly flush with the edge of the bowl of the oven, so I shut the door and turned on on-demand at 335F. Sativas really do love those lower temps. The taste was great and the impact was high. When I finally stopped getting vapor (it took a surprisingly long time), I opened it up and carefully pried the concentrate puck out with the little metal lid tool and dropped it on the table (it's hot, don't touch it). The flower came out more or less like a puck and the chamber and dosing cap was clean. I was so happy with it that I did it twice.

I really do love this vape, quirks and all. It hits like a truck and I enjoy the little ritual of loading and using it. I've been leaving the device in on-demand. I feel like I get a lot more control over things that way and the device stays a LOT cooler and comfortable to hold/pocket. I doubt I'll go back to session mode again.
Click to expand...
I Have to agree, I just deep cleaned mines after 2 weeks “also spot cleaned during this time“ and just couldn’t really get any thing to enter air path gaskets from the top. But found that I was able to fit a thin que tip in the glass gaskets, some one recommended GUM brushes. Mentioning that they could clean every thing now with it.
 
OrsonWhales

OrsonWhales

Well-Known Member
I hope I get mine before the end of next week. I leave for vacation. I ordered it Wednesday and it’s still not in transit. I don’t want it sitting here when I’m not. Maybe they can throw some capsules in the box! Looking forward to it.
 
OrsonWhales,
A

Archive

Active Member
I had an accessories order pending for awhile too but I e-mailed in a few days ago and I guess they had a shipping issue of some kind (change of fulfillment center) that's supposed to be resolved today according to the e-mail.

So far, it looks like my accessories haven't shipped yet, so I'm not sure what's going on. I'm patient at any rate. I know it'll come. I'm just looking forward to testing out the water-bong attachment.

Maybe Gary can clue us in on what's going on with shipping.
 
urgemore

urgemore

New Member
Is no one else's door falling off all the time? I don't know if maybe I have a defective pin or hinge holes, or what. Any time I open it, unless I'm very careful, I can count on the door coming off. Also, hey, I already lost that tiniest screen. Luckily, I had another. It'd be nice if you could buy a little baggie of fifty of those for a few dollars.
 
Okla68

Okla68

Well-Known Member
urgemore said:
Is no one else's door falling off all the time? I don't know if maybe I have a defective pin or hinge holes, or what. Any time I open it, unless I'm very careful, I can count on the door coming off. Also, hey, I already lost that tiniest screen. Luckily, I had another. It'd be nice if you could buy a little baggie of fifty of those for a few dollars.
Click to expand...
I was Amazed when I 1st read of this happening a cpl weeks ago to someone. After looking closer, its designed to be removed, duh. Why, No Clue. It is very easy to move that pin with a needle placed in the lil hole.
Agree on Baggie of extras. I dropped mine the other day, didnt think I'd ever find it. Not wanting to use the included spare ALREADY ! Fortunately, I had vacuumed the day before and could pick it out !
 
kokolokokolokon

kokolokokolokon

Well-Known Member
I find you can get a decent amount of clouds (not superclouds) and extend the flavor using a mid hand grinded herb. you need to stir, but if you are in a comfortable spot to do it i recommend it. To finish the bowl and get a very even abv you need to grind it again (something similar to use non grinded herb on a dynavap).
Im loving this device.
im impacient to try the capsules and the new microdose disk.
 
kokolokokolokon,
Shorner

Shorner

Well-Known Member
kokolokokolokon said:
I find you can get a decent amount of clouds (not superclouds) and extend the flavor using a mid hand grinded herb. you need to stir, but if you are in a comfortable spot to do it i recommend it. To finish the bowl and get a very even abv you need to grind it again (something similar to use non grinded herb on a dynavap).
Im loving this device.
im impacient to try the capsules and the new microdose disk.
Click to expand...
Yeah im checking their site every day for the capsules , can't wait🤣
 
Flow

Flow

Well-Known Member
Hi !
I use mine very often and am satisfied with it !
My prefered way yet is to go for a whole little nug in the chamber… loosely broken… i bet it's been already said in this thread :D
In On demand mode, i go from 160 up to 200° C with 2 or 3 draws on each step... No "massive" but great vapor !
BTW cleaning is way easier !

Enjoy !
 
Vapetrees

Vapetrees

Vaped Out
Flow said:
Hi !
I use mine very often and am satisfied with it !
My prefered way yet is to go for a whole little nug in the chamber… loosely broken… i bet it's been already said in this thread :D
In On demand mode, i go from 160 up to 200° C with 2 or 3 draws on each step... No "massive" but great vapor !
BTW cleaning is way easier !

Enjoy !
Click to expand...
Yeah I noticed that at lower temperatures the taste is really good, but the clouds aren’t huge. I don’t mind because I usually go for flavor first, then go up in temperatures.
 
Vapetrees,
  • Like
Reactions: Flow
1

1973PortlandToker

Well-Known Member
I posted this somewhere else (can't find it), but I'll ask my standard question here too. (Haven't looked through all 29 pages.)

Does the Legacy Pro handle traditional pressed hash well?
 
1973PortlandToker,
RxPlorer

RxPlorer

Well-Known Member
1973PortlandToker said:
I posted this somewhere else (can't find it), but I'll ask my standard question here too. (Haven't looked through all 29 pages.)

Does the Legacy Pro handle traditional pressed hash well?
Click to expand...
I don't recommend traditional pressed hash, unless you're slicing it up very fine. The convection airflow want a lot of surface area which you're not getting with large pieces of pressed hash. It does a fantastic job with unpressed hash and kief! Edit: and rosin for that matter. Anything full melt is good to go
 
RxPlorer,
  • Like
Reactions: Flow
1

1973PortlandToker

Well-Known Member
What about the Firefly 2+ for traditional hash? Trying to decide between the two.

Or another portable that vapes hash well. A few have suggested the Mighty but it doesn't have an on-demand feature.
 
1973PortlandToker,
Pukka

Pukka

Well-Known Member
1973PortlandToker said:
What about the Firefly 2+ for traditional hash? Trying to decide between the two.

Or another portable that vapes hash well. A few have suggested the Mighty but it doesn't have an on-demand feature.
Click to expand...
They are both pretty similar and neither look like they'd digest Lebanese Blond very well. I was going to try cotton floss/chopped hash bundles this weekend but the dispensary bungled things up and gave me a big old moon rock instead of my gram chunk of hashish. Opps.
 
Pukka,
hausland

hausland

Active Member
about to order one of these…I don’t need yet another portable, but the VAS + Gary’s FCKB30 coupon are making it hard to resist…lol
 
1

1973PortlandToker

Well-Known Member
RxPlorer said:
This is getting OT I know, but honestly just skip all these if pressed hash is your primary use. Get a vapman!
Click to expand...

I'm starting to come to this conclusion too. I can have something like a Vapeman for hash, and an AirVape or Firefly for everything else.

All of them are portable, on-demand, and allow microdosing.

Your comments were not off topic, but spot on.
 
Last edited:
You must log in or register to reply here.
Top Bottom