710 coils

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
Hadn't seen this before, but for anyone wondering the bangers work great on littles.

2yuc7l5.jpg
 

StormyPinkness

Rhymenocerous ʕ•ᴥ•ʔ
Oh I have no idea what littles are, I figured it'd get a laugh here or someone would tell me where using that word came from. I didn't make that clear enough in my post. Some very affordable bho shatter was in the package, though I do kind of like using the term littles...

Dabbing some littles, doing a littles dabbing.
 

b0

Cloudy...
I just decided to go with a 25 axial coil for my first enail setup and I'm planing to buy an auber 300, it needs a 110v coil right?

Also, anyone knows if the auber will work at 240v in UK or I will need a transformer?

Thx!
 

JCat

Well-Known Member
Accessory Maker
I just decided to go with a 25 axial coil for my first enail setup and I'm planing to buy an auber 300, it needs a 110v coil right?

Also, anyone knows if the auber will work at 240v in UK or I will need a transformer?

Thx!
You should buy a 240v coil if you are going to be running it in the UK on 240v. The Auber will support either, but the coil needs to support the correct AC voltage.
 

b0

Cloudy...
You should buy a 240v coil if you are going to be running it in the UK on 240v. The Auber will support either, but the coil needs to support the correct AC voltage.

So the auber supports bi volt then? Seems like in their website I can only choose 110v coil, that's what confuses me. Do I need to send them an email if I want my unit to run 220v coils?

Edit: Got an email for them, their unit run in both 110 and 220 I just need the right coil, 220 in my case :)
 
Last edited:

Grifo

Well-Known Member
Just got my sapphire insert from constant gems, i do not have a 25mm banger so i tried it on my 30mm banger with small pearls around it and man the taste is out of this world. I have a 25mm from 710 coils on the way but i might have to go to the smoke shop and pick one up because impatient.
 
Grifo,

710Coils

Well-Known Member
Manufacturer
So the auber supports bi volt then? Seems like in their website I can only choose 110v coil, that's what confuses me. Do I need to send them an email if I want my unit to run 220v coils?

Edit: Got an email for them, their unit run in both 110 and 220 I just need the right coil, 220 in my case :)
The Auber will work in both 110 volt and 220 volt without any adjusting. It does the switch automatically and nothing is needed to be adjusted.

@Grifo The FC code was limited to one use per person. But here is another code that will get you 10.00 off your order

HookItup

The above will save you 10.00 on an order over 40.00

Opaque inserts are due to ship this week and all pending orders will get shipped out and goodies will be added for being soo damn patient =)

Hope everyone is having a great day !!!!!!!

Your ever loyal coil and quartz monger

Shane
 

biohacker

HREAM
Is the seal between a 710Coils banger and the Quartz Pi cap "air tight"?

I can't get any of my bubble caps to form an exact air tight seal with my bangers. Not sure if this is normal or not?
 
Last edited:

Grifo

Well-Known Member
The Auber will work in both 110 volt and 220 volt without any adjusting. It does the switch automatically and nothing is needed to be adjusted.

@Grifo The FC code was limited to one use per person. But here is another code that will get you 10.00 off your order

HookItup

The above will save you 10.00 on an order over 40.00

Opaque inserts are due to ship this week and all pending orders will get shipped out and goodies will be added for being soo damn patient =)

Hope everyone is having a great day !!!!!!!

Your ever loyal coil and quartz monger

Shane
yeah too late lol i pmd you about it. Ill use it next time.
 
Grifo,
  • Like
Reactions: 710Coils

710Coils

Well-Known Member
Manufacturer
@biohacker Whats your preferred torch/cooling times you use for your sapphire and ruby inserts? @Grifo is looking for some advice and you were the first person that came to mind =)

@StormyPinkness I will toss out the idea to Quartz Pi and see if he would ever be interested in adding my logo somewhere on his caps =)

All bangers will be restocked next week and I will also be adding 14mm female 90 degree bangers to the mix!!!!

Opaque inserts in non slit will be back in stock and the slit are coming in shortly. I have also been pushing to get the bottom pucks back to 6mm and they finally took care of it. So the current opaque bangers I have in stock and everything coming in Tuesday will be with a 6mm puck!!!! This means more heat retention for those dabs and should also equate to lower temps and longer heat retention =)

Hope everyone is having a great weekend so far

Your ever loyal coil and quartz monger

Shane
 

biohacker

HREAM
@biohacker Whats your preferred torch/cooling times you use for your sapphire and ruby inserts?

Variables like what torch, fuel level, and technique all affect times, but with a full Big Shot it's about 45s on, and 1:30-2:30 cool down to get to around low 500's IME. I stopped timing once I picked up the IR Thermometer, which is an absolute must have for any torchers IMO.
 

Grifo

Well-Known Member
Variables like what torch, fuel level, and technique all affect times, but with a full Big Shot it's about 45s on, and 1:30-2:30 cool down to get to around low 500's IME. I stopped timing once I picked up the IR Thermometer, which is an absolute must have for any torchers IMO.
Thanks! Gotta wait till payday for an IR thermometer but that kinda helps thanks
 

710Coils

Well-Known Member
Manufacturer
All out of stock bangers land today!!!! I will also officially have 14mm female 90 degree bangers in both 25 and 30mm =)

Some of the opaque inserts will be in stock today and the rest are a week out

Hope everyone is having a great day=)

Shane
 

FlyingLow

Team NO SLEEP!
Thanks Shane, been enjoying my new setup and going back and forth between the new quartz and my old SiC. The increased airflow and taste is incomparable and incredible! But I find myself lacking the lung capacity to put any continued spin on the pearls. Even without spinning the pearls much, I do appreciate the extra surface area the pearls provide.

The greatest improvement over my SiC setup is that the quartz handles larger dabs so much better.

Makes me curious of the inserts. Can you break down the differences/similarities between using pearls versus an insert cup versus without?
 
Top Bottom