710 coils

[ClearBlueLou]

What’s the word on the 25 10mm opaques?

Not in a hurry at all. I’ve been challenged to give the 14mm joint more of a chance, and I have a 14mm/25mm expressly for the purpose, so it all remains to be seen once I’ve put things thru their paces (except those inserts and that cap, any joint size’ll do for them).

Would you post a pic of your new mat? Love to see it!

 

[Hackerman]

Wow, I just wanted to pop in and say that I got my 710 quartz banger and I am amazed. I have 2 or 3 other bangers and they and nothing compared to this. The quality is amazing. This thing is so thick it's more like a beer mug compared to the cheapo ones I have. LOL

I am off to get a controller and then a coil from 710 but I just wanted to stop in and say thank you one more time and comment about the amazing quality of this banger. Just amazing.

Big thanks once again for the contest and the super fast response. I look forward to doing business together soon.

 

[710Coils]

25mm opaques in 10mm joints are inbound in both 90 and 45 degree flavors

 

[Ramahs]

As a testament to @710Coils shipments being protectively packaged for shipping, this was my box I received from him a few days ago. Of course, the USPS were particularly harsh on this poor box, as you can see. I explain that to say that nothing inside, including the glass 30mm banger and coil, was damaged. Everything was neatly bubble-wrapped in layers and surrounded with foam peanuts and all was good.

This is why that proper protection is important. Postal workers have bad days too. We all do. Thanks Shane:

 

[Pyr0]

Potion is cfl and ruby amethyst is a wine color

Hi Shane,
Quick (noob) question..
What's cfl?
The pics labeled Potion on your site look like either purple bubbles or green bubbles

 

[Roth]

Hi Shane,
Quick (noob) question..
What's cfl?
The pics labeled Potion on your site look like either purple bubbles or green bubbles

That glass changes color depending if you're looking at it under natural or fluorescent lighting. I believe Potion changes between a blueish and purplish color.

Terps, serum, and a few other colors do that as well.

 

[710Coils]

@Pyr0 CFL changes color depending on the light you have it in. So the potion caps go between purple to a greenish blue.

 

[Pyr0]

Thanks guys
[edit] damn it sold out

 

[Easywider]

I just grabbed a cap and inserts, hoping the Pi cap can get the pearls moving a bit better then my leaky dhgate cap. Really looking forward to trying the inserts.

 

[pxl_jockey]

I really like the Pi bubble in Portland Green. I like green...

Really great to see yet more happy members reporting in with their purchases!

Happy Friday everyone!

 

[710Coils]

@Pyr0 I have more being made. These will be voodoo and serum. Working on more colors and will try to get more potion if he has them =)

@Easywider These Pi caps are crazy on how they milk up the dabs. I am smitten with them!!!

Hope everyone is having a great day

Shane

 

[Ramahs]

What's so great about these Pi bubble caps?

Is the airhole size better than others or what?

 

[710Coils]

They make your dabs milk up like no tomorrow. I was skeptical until I had them in hand and now I am hooked on them. I lowered my temps 5 degrees just from using the caps

I got one colored 25 and lots of clears in stock and have more colored caps on the way =)

 

[Buildozer]

I have to report that this 30mm opaque bottom banger and axial coil has been enlightening! Until about a week ago I was oblivious to the existence of axial cables, opaque bottom bangers, pearls, and drop in inserts! Tools of the Gods! I had no idea what I was missing.. Thanks again Shane, you were a pleasure to deal w/, your store is no nonsense, the products are beautiful, you really did me a solid, and this setup is Amazing!

 

[Ramahs]

Okay...so, I just ordered an Auber RDK-300A. All I have to go with it at the moment are a 30MM barrel coil and 30mm banger from @710Coils .

What advice/tips/etc. can you give someone like me, that's never used an enail before?

 

[710Coils]

Scoop a carb cap and set it to 550 and work your way down in 10 degree increments until you find the flavor really starts to stand out and then you want to do smaller tweaos to the temp till you find the perfect window. Once you have that you are good to go every time you turn it on.

 

[ew91]

Okay...so, I just ordered an Auber RDK-300A. All I have to go with it at the moment are a 30MM barrel coil and 30mm banger from @710Coils .What advice can you give someone like me, that's never used an enail before?

I have the Auber 200 with @710Coils 30mm axial/banger. I have it set low at 510f and it's perfect for me with small dabs. You have an amazing set up coming!! Hope that helps!

* @710Coils beat me to it! But, do what he said!

 

[Ramahs]

Scoop a carb cap and set it to 550 and work your way down in 10 degree increments until you find the flavor really starts to stand out and then you want to do smaller tweaos to the temp till you find the perfect window. Once you have that you are good to go every time you turn it on.

Wow. That's about a hundred degrees lower than I would have thought to start. You are talking about a barrel coil, right? Not an axial coil?
There must be significantly less heat loss between the coil and nail in this setup than I ever would have suspected. Impressive!

I have the Auber 200 with @710Coils 30mm axial/banger.

Specifically looking for help with the barrel coil, not the axial coil.

 

[710Coils]

@Ramahs barrel coil. My buddy rocks a barrel coil on an auber and he is solid around 540 =)

 

[Ramahs]

@Ramahs barrel coil. My buddy rocks a barrel coil on an auber and he is solid around 540 =)

I'll take your advice. 550 and down to start. Figure it out from there.

 

[710Coils]

Bangers land today!!!!

I will have more of the following available:

45 degree:
10mm male 25mm clear and opaque
10mm male 30mm clear and opaque
14mm male 25mm clear and opaque
14mm male 30mm clear and opaque

90 degree:
10mm male 25mm clear and opaque
10mm male 30mm clear and opaque
14mm male 25mm clear and opaque
14mm male 30mm clear and opaque

These are the newer version and have the following tweaks
Buckets are a few mm taller
Necks have a few more mm in between the bucket and the bend of the neck

More colored caps have also been ordered in the following colors:

CFL:
Voodoo
Serum
Terps

Non CFL:
Brozay
Haterade

All the above will be in pairs (1 x 25mm and 1 x 30mm)

Sticker packs have also been added to the mix and I am expecting mood mats this week =)

Hope everyone is having a good start to the week

Your loyal coil and quartz monger

Shane

 

[Baron23]

@Ramahs barrel coil. My buddy rocks a barrel coil on an auber and he is solid around 540 =)

That might be me...I run at 545 on my RDK-300 with Shane's 25mm QB and coil.

I could maybe drop another 10 degrees or so...but I rather like it where its at.

 

[Oogendoogan]

That might be me...I run at 545 on my RDK-300 with Shane's 25mm QB and coil.

I could maybe drop another 10 degrees or so...but I rather like it where its at.

You guys are getting pretty low! With the axial 25mm coil I have my temps down at 560 most of the time but I find myself putting it up at 570. I guess I like hot dabs lol. The axial coil forsure allows lower temps than the barrel at least for me. With the barrel I was at 580 for less milky dabs. The axial could easily go down to 550 or less with great results I just like that chest punch. Im using the beveled top opaque bottom banger with three 4mm terp pearls. Might go down to 550 later and see how I like it. I know this thing can crank out vapor as low as 480 I just prefer higher temps I guess? Anyways these are the best dabs I’ve taken. Thank you so much @710Coils for the gear! I am very tempted to grab a CFL cap from you soon here. Might add inserts as well. One question for everyone here. Opaque vs clear? What’s your opinion? I find that I can go a little lower in temp for the same density of vapor with the opaque but I’d like to hear other people’s experiences.

 

[710Coils]

45 degree bangers are live. 30mm opaque weren’t in this package and should be in with the next package =)

I got more to put up so there will be more 25mm 90 degree opaques coming in 10 and 14mm

Hope you are all having a saucy Monday

Shane

 

[biohacker]

Just about ready to hop onboard the 710 coil train! Still unsure whether to go clear or opaque for my inserts? And can't decide between 25mm and 30mm for my .025-.05g max dabs! Shane I think i'm going to be ordering the motherload package!!

PS. What dabbers are you guys using? Shane any plans to stock any?