XVape XLUX ROFFU

Pangolin 6

Well-Known Member
Need help with a couple questions - was wondering is it better or worse to push the stem on the wpa all the way down?

xvape-roffu-glas-mundstueck~2.webp

It's user preference I think. I use it in the most direct way positioned over the bowl and so necessarily fully extended.

This post by @LesPlenty should demonstrate.

https://fuckcombustion.com/threads/xvape-xlux-roffu.52284/post-1756566
 

Petetbay

Well-Known Member
I was also wondering if the holes on the stem in the pic above are important because i wanted to switch it out with either of these however they don't have the holes?
The air holes are only for the included glass tube so if you push it all the way down you still get air flow because the end hole is blocked, other stems don’t need the holes and better to locate the wpa on the side of the screen/bowl for direct flow.

 
Last edited:
The air holes are only for the included glass tube so if you push it all the way down you still get air flow because the end hole is blocked, other stems don’t need the holes and better to locate the wpa on the side of the screen/bowl for direct flow.

thank you so much ur a lifesaver 🙏 might i ask aswell which of those 2 stems in ur picture do you prefer using? and easiest to use? thanks again
 
roffu_connoisseur,
  • Like
Reactions: LesPlenty

RAMMSTEIN

Well-Known Member
I bought the dosing capsules from Xvape:




So far, they are fine, but unfortunately, the caps of the capsules come off quickly.
Earlier today, 4 capsules fell on the street, and I had to search for the caps... I found 3 out of 4, but one is lost.

Unfortunately, all the caps fell off.
Now I wanted to look for replacements and was wondering if these would fit:

 
RAMMSTEIN,
  • Like
Reactions: LesPlenty

LesPlenty

Well-Known Member
Company Rep
You can get XMAX V3Pro caps that also fit and are a bit different design,
 
LesPlenty,
  • Like
Reactions: RAMMSTEIN

RAMMSTEIN

Well-Known Member
Those are exactly the capsules I have... and I find that the caps are quite loose. That’s why I was looking for ones that you can screw on instead.

Then I noticed another issue yesterday… I realized that the mouthpiece wasn’t sitting firmly anymore. After taking a closer look, I saw that the magnets had come loose from the mouthpiece and were sticking to the Roffu.

Is it possible that the magnets in the mouthpiece were just glued in? And if so, what’s the best way to fix them back in place?
 
RAMMSTEIN,
  • Wow
Reactions: Petetbay

Bear R.

Well-Known Member
The caps and the tube case you posted yesterday are the ones you need..I have those and they work great and the lids are a snug fit.. as for the magnets, I don't see any that are exposed..very strange..that sucks tho.
 
Last edited:
Bear R.,
  • Like
Reactions: LesPlenty

LesPlenty

Well-Known Member
Company Rep
Those are exactly the capsules I have... and I find that the caps are quite loose.
Sorry for the confusion as the ones you linked are the older style and the ones I linked are the newer type that XVAPE now use as well...these are normally very tight as @Bear R. explained.
As for the magnets, again as stated by @Bear R. there are no exposed magnets in the cooling unit, any chance you could post us a picture of your problem so we can help sort it for you. The only problem we had was early on with the cooling unit where some people got cracks in the area where the magnets are housed/hidden.
 
LesPlenty,
  • Like
Reactions: Bear R.
Top Bottom