Venty by Storz & Bickel

Petetbay

Well-Known Member
Exchange on goodwill", I was also very irritated.
Is it possible that a misunderstanding of the communication with S&B? Maybe they made the statement to let you know they are acting fast with the RMA to replace the device before they actually received the device from you to confirm that it needed to be replaced. I really can’t see that this wouldn’t be under warranty.:2c:
 
Last edited:

Jack_72

Well-Known Member
No they closed the RMA as usual and provided several mails to inform me about the process of the RMA, the parcel tracking code and the invoice for the new device. So the whole process was finished in point of S&Bs view. The note "Exchange on goodwill" has been typed into the new invoice after all.

This is entirely in German btw. And that vocabulary certainly blames the customer and points out that they would not have to replace if they did not want to. The magical word is "Kulanz".
 

Jack_72

Well-Known Member
I think that "Exchange on goodwill" is just boiler plate legalese that the lawyers insist on. I would not read too much into it.
Could be.
Perhaps they are doing it so as not to unsettle shareholders. So that in the end it doesn't look like there are 1000 warranty cases, but perhaps only 200 and the remaining 800 are replacement devices as a gesture of goodwill because S&B loves its customers so much :D.

I'm just wondering whether (many) other invoices also contain this addition like mine?
 

Flower of empathy

Sometimes to stupid to become a fool
Accessory Maker
@Vape_Or_Die420 yes, the stable shape is just perfect for this application and even the 'balloon' is really handy for cleaning, brushes are for makeup imho:lol:
A huge side benefit is the life cycle time goes up by not opening the caps by hand and deforming them...
There is an even more efficient way for the whole concept - 'in theory' it could be done without having to touch those lids at all...
Got a 'geometrical solution' but that'll take a few more seconds of development - a tricky beast, i'm 50:50 if it'll work reliably enough or end in the trash bin...
Currently upgrading my print farm, it'll take at least a week for official availability...
 
Last edited:

Jack_72

Well-Known Member
I wish someone could develop some kind of nice little clamp that could be put tightly on the cooling unit in a way to prevent the inserted orange tool / pick from falling out (see picture 1 & 2):


The tool already holds somehow, but it is not particularly tight. If the clamp was firmly attached to the CU, the tool would not be able to slip out so easily.
 
Jack_72,
  • Like
Reactions: Tweakz
I wish someone could develop some kind of nice little clamp that could be put tightly on the cooling unit in a way to prevent the inserted orange tool / pick from falling out
This isn’t really a solution for your situation but you got me curious so I placed it inside my sedhed case and it is surprisingly a decent spot

IMG-5134.jpg


I don’t use the tool though so I’m testing it out on the back as additional support for my pointer finger lol

IMG-5137.jpg


Shook this thing like it owed me money and it withstood the test
giphy.gif
 

steiner666

Serial vapist
Hey all, long time no post! I’ve been thinking about getting a Venty to replace my mighty and just wanted to know how it is with a water pipe, since that’s how I use mine 90% of the time.

Does the increased airflow allow you to hit through a water pipe adapter at a higher rate or is it just through the dry mouthpieces that you can hit faster? It would be great to be able to take quicker hits but still the same size clouds

Also, any recommendations on water pipe adapters? I’m assuming the ones from my mighty will not fit?
 

buttervap

Active Member
Hey all, long time no post! I’ve been thinking about getting a Venty to replace my mighty and just wanted to know how it is with a water pipe, since that’s how I use mine 90% of the time.

Does the increased airflow allow you to hit through a water pipe adapter at a higher rate or is it just through the dry mouthpieces that you can hit faster? It would be great to be able to take quicker hits but still the same size clouds

Also, any recommendations on water pipe adapters? I’m assuming the ones from my mighty will not fit?
I'm using the Sneaky Pete glass WPA. I can hit it pretty hard through water. I have the xmas starry whip from potv on the way too.
 

chillAtGVC

Well-Known Member
The dry mouthpiece is where the air restriction comes in. So if you take that off and use a WPA, then you have unrestricted air into your bong. The Venty has 130 W of power you’re probably not going to be able to overpower it by drawing quickly.
 
chillAtGVC,
  • Like
Reactions: buttervap

twain55

Active Member
I'm using the Sneaky Pete glass WPA. I can hit it pretty hard through water. I have the xmas starry whip from potv on the way too.
Is that the same one that people use, including me, for the Mighty and Crafty? If so, will it fit over the wider Venty mouthpiece? ime its already a tight fit with the smaller Mighty/Crafty mouthpiece.
 
twain55,

buttervap

Active Member
Is that the same one that people use, including me, for the Mighty and Crafty? If so, will it fit over the wider Venty mouthpiece? ime its already a tight fit with the smaller Mighty/Crafty mouthpiece.
I'm not sure about that. I never owned a Mighty or crafty.
 
buttervap,

TheHussleWay

New Member
I recently sold my Venty (purchased on release day) and bought a Solo III. After a week I listed the Solo on eBay and repurchased a Venty.

I noticed that the new Venty I received has a slightly different filling chamber, it has notches around the bowl, and the colour looks slightly different.

Anyone know why this is? Is it an update? If so, why was it updated?

 

steiner666

Serial vapist
I'm using the Sneaky Pete glass WPA. I can hit it pretty hard through water. I have the xmas starry whip from potv on the way too.

Right on, thanks for the suggestion! I ordered a couple I found on dailyhighclub.com, a glass one and a silicone one lined with steel. But I’ll try the sneaky Pete one too probably. Plus I see an all steel one on delta3d but it’s sold out.
 
steiner666,

MrGreenspoon

Well-Known Member
I noticed that the new Venty I received has a slightly different filling chamber, it has notches around the bowl, and the colour looks slightly different.

Anyone know why this is? Is it an update? If so, why was it updated?


The design of the bowl edges has changed, it was discussed here in this thread but I don't think anyone knows for sure why s&b did this.
Maybe the answer is simple and they just wanted to save material to lower the production costs.
 
MrGreenspoon,

ChooChooCharlie

Well-Known Member
I recently sold my Venty (purchased on release day) and bought a Solo III. After a week I listed the Solo on eBay and repurchased a Venty.

I noticed that the new Venty I received has a slightly different filling chamber, it has notches around the bowl, and the colour looks slightly different.

Anyone know why this is? Is it an update? If so, why was it updated?


Different!
Certainly different than my Venty
Hmmm... heat insulation protection with those spacer tabs?
 

TheHussleWay

New Member
The design of the bowl edges has changed, it was discussed here in this thread but I don't think anyone knows for sure why s&b did this.
Maybe the answer is simple and they just wanted to save material to lower the production costs.
Yeah it does seem more like a cost-cutting reason :hmm:
 
Top Bottom