Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
KillaKali831
Active Member
please do I am also interested
Andrew26
Happy Dabber
@Prospector Looks pretty flawless... what store/ seller did you get that piece from on dhgate?
Prospector
Active Member
weenstoned
Well-Known Member
Looks like a copy of @chipglass on instagram
https://thepipeking.com/product/chip-glass-crusher-6/
Pretty close shaping. As for the function of this one it might be good, but ideally I would want it to have 2-4 holes instead of the 12-15 tiny slits.
Cannabis Connoisseur
I LOVE LIFE
Hey why is it you prefer the. 2-4 hole pieces? I have2 4 hole pieces both are recyclers though and miniature. I also have 2-2hole banger hangers from @VaPeD&CoNfUsEd (one just purchased yet to arrive) I've tried to start dabbing out
these pieces exclusively because I have noticed less reclaim when dabbing vs my larger more higher diffusion pieces the reclaim is still high in the small4holes recyclers due to the amount of water i believe
I like to have both around to rotate! I have found Less diffusion= less reclaim= More flavor. My favorite pieces to dab top shelf errl from are the FC-710 which is a diffusion pump, A Turbine HT, a pig snout 2 hole banger hanger, and a custom heady recycler with a 9 hole diffy. BUT that is only with top shelf , nug run concentrates. If I move away from the $70g stuff onto the $30g stuff made from sugar trim I like a little more diffusion. The potency is usually close to the same as the nug run but it's usually not as great of a taste and a tad harsher so I prefer a little showerhead, matrix, or something with a little more diffusion. I does cause a little more reclaim but not that much. In fact I ONLY collect reclaim from my drop downs now. Using the Liger I never have enough reclaim in the actual bong to matter even with a high diffusion piece, just a little in the drop.
JUST enough to where it glugs. Just add a little bit at a time and you can really tell when it's right by feel on this one.
right at the tip of the opening if that makes since. Water should just barely go into the rounded area at the bottom of the mouthpiece.
This video looks close, sometimes I put like a 1/4" more than this for a little more resistance and glug, but somewhere around here
_WaxPayne_
Well-Known Member
For being such a small piece, the 710 took a lot of water to get great diffusion from. I liked keeping the water just a couple millimeters above the "straw". Here's a video example of what I mean:
Ive found just right above or level to the tube pointing up.
Otherwise with harder drags, water comes in the mouth.
So most of my bongs have been pretty good I consider and have had few issues. How common is it for bongs/bubblers to have "splashback" from pulling too hard? Maybe I'm just spoiled lol but some of these pieces I wonder what they are thinking because there is no way you can use such a piece without pulling very very slowly.
weenstoned
Well-Known Member
I definitely find more flavour from as few holes as possible. I mostly dab from my heady minitubes now which have either 2 or 3 hole percs and between 3.5 and 6 inches tall. I think there is less reclaim, but I also enjoy that it is much easier to pull from than a big piece with a fancy perc. I think this results in me coughing less and actually inhaling more of the dab.
I basically only whip out my chinese glass now if I need a piece that can support an e-nail, and also the Mothership mini copy as using the swing and capping it is oddly satisfying. The piece has pretty great flavor, but I think if it had 20% of the amount of slits it would be even better.
Andrew26
Happy Dabber
@flotntoke So I pulled the trigger lastnight and went with your advice and ordered the FC 187 sidecar 
.
I'm pretty stoked to get it in. It's already been shipped so hopefully it doesn't take an eternity to make it to Canada! After I saw @Prospector pics of his Mobius and it was da done deal for me lol.
I went with Steven from dhgate as the seller. Hopefully I get a nice piece with hardly any problems
Thanks again guys for the tips and suggestions
.
.I'm pretty stoked to get it in. It's already been shipped so hopefully it doesn't take an eternity to make it to Canada! After I saw @Prospector pics of his Mobius and it was da done deal for me lol.
I went with Steven from dhgate as the seller. Hopefully I get a nice piece with hardly any problems
Thanks again guys for the tips and suggestions
.
Monsoon
Well-Known Member
Lately for me it's been 6-8 days to Canada which is faster than shipping from the US in most cases. Pretty impressed especially since it used to be a lot longer.
Andrew26
Happy Dabber
@Monsoon Thanks man hopefully it only takes 6 to 8 days 
@flotntoke What size quartz banger would you recommend for my Mobius piece that's coming in?
From Hyman quartz on dhgate I was gonna get either the 16mm size bucket with 3mm thickness or 22mm size bucket with 4mm thickness?
Seeing the price I'll probably just get both.
Anyone here have both?
@flotntoke What size quartz banger would you recommend for my Mobius piece that's coming in?
From Hyman quartz on dhgate I was gonna get either the 16mm size bucket with 3mm thickness or 22mm size bucket with 4mm thickness?
Seeing the price I'll probably just get both.
Anyone here have both?
flotntoke
thoroughly vaped
I Just got this piece. My first actual piece. I had a hand me down small glass bong. and a small pipe so its new to me. It only has one honeycomb. What do you guys think about it? Considering picking up an ash catcher for more perc.
Looks like you're smoking instead of vaping through that? Yeah... get the ashcatcher. I'd advise one that is easy to take apart and clean. It can be a real bitch to get a wayward fleck of weed out of one of those honeycombs.
@flotntoke So I pulled the trigger lastnight and went with your advice and ordered the FC 187 sidecar
I'm pretty stoked to get it in. It's already been shipped so hopefully it doesn't take an eternity to make it to Canada! After I saw @Prospector pics of his Mobius and it was da done deal for me lol.
I went with Steven from dhgate as the seller. Hopefully I get a nice piece with hardly any problems
Thanks again guys for the tips and suggestions
Congrats, man!! They usually take about 8-10 days to me. Depends on customs there and when they release it. Be forewarned.... epacket tracking seems like it is usually pretty up to date until it hits your country. With USPS, the piece is usually here the same day epacket tracking says it is shipping from the point of entry. A few times I've already been sitting here hitting my piece when it finally updates to say it was delivered some hours earlier. Think it just takes a while for their system to catch up once it's here.
@Monsoon Thanks man hopefully it only takes 6 to 8 days
@flotntoke What size quartz banger would you recommend for my Mobius piece that's coming in?
From Hyman quartz on dhgate I was gonna get either the 16mm size bucket with 3mm thickness or 22mm size bucket with 4mm thickness?
Seeing the price I'll probably just get both.
Anyone here have both?
I only have a couple 16s. Think 22 would be fun if you can find a cap for it. More glass may make for more heat retention and slower cooling. That could come in handy if you like the big bombs. Nothing wrong with getting both and giving us a comparison review!
Usually do them with my nano if not on a Ti nail these days. Tough for me to get concentrates here, and once you figure out a good system you can dab for days from the nano. I've kind of given up trying to hit those loads until they stop producing vapor. It's like the fucking energizer bunny or something! I got ahold of some nice live resin, and the shit will not finish! I got blitzed off it the other night and finally gave up trying to finish it. The next night I got another 6-7 decent hits off it while trying to kill it and clean my GonG for plain old green. Makes for some serious fuzzy TV!
herb forester
Well-Known Member
Look what I found, finally a 50t! http://www.dhgate.com/product/mobiu...-t-50-mm-bubbler/385467283.html#mfavit-1-null
Perc could be better, more slits, but maybe not so bad since its smaller? Anyone able to translate "in kind shooting" from Chinglish? Seems a commonly touted feature/benefit, maybe I'm just dense?
Perc could be better, more slits, but maybe not so bad since its smaller? Anyone able to translate "in kind shooting" from Chinglish? Seems a commonly touted feature/benefit, maybe I'm just dense?
Last edited:
YungLeaner
Well-Known Member
Hey, guys, what's a well functioning recycler from the Gate with a female joint option? Open to buying d-cycler or something in that price range, but would prefer cheaper, and i don't really want to risk ordering a DHgate klein or FTK or torus. I want a simple, really well (minimal chug) functioning two chamber recycler. Does that exist? The inconsistent shaping on a lot of Chinese pieces makes me think it may be abit of a unicorn hunt but maybe i'm totally wrong. The recycler tube from SunshineStore has me fiending for a recycler with better function.
UniqueCrafty
☆☆☆☆
I Just ordered a D020 Bubbler, now i read that the D020-D is the better choice...
Should i also order the D020-D, or am i fine with D020 ?
Are there any difference between those bubblers expect the size ?
Thanks for your answers guys!
Should i also order the D020-D, or am i fine with D020 ?
Are there any difference between those bubblers expect the size ?
Thanks for your answers guys!
MoltenTiger
Well-Known Member
The D020 has a bit more drag and more water turbulence, where as the matrix perc is much smoother but probably kills flavour more.
I would wait and see how you go with the D020, I am quite happy with mine, except the mouthpiece is quite small.
Last edited:
Mangos
Well-Known Member
Hey guys was hoping to get that new Hydratube from SSS this weekend but it's still in my local sorting office. I got the FC 710 this morning from Steven which was ordered along with the Enail and hydratube.
The enail was supposed to be here yesterday , I believe the seller gave me a fake number when it was "shipped" on Monday. I messaged them yesterday- asking them why the tracking information was still not updating, then I recieved a completely different tracking number stating the item got sent out on Thursday. Was hoping it would come faster as it was being sent via DHL.
No worries though I did manage to get a few g's of some nice shatter to indulge with once it arrives
The FC 710 is awesome, I got it on the recommendation of @mrbonsai420 as a piece to go with my Enail. I've only vaped on it with my Evo and it was awesome. Perfect draw and taste, the amount of water it needs put me off at first but it manages to retain taste very well.
Will update when I get that hydratube, hopefully Monday morning .
The enail was supposed to be here yesterday , I believe the seller gave me a fake number when it was "shipped" on Monday. I messaged them yesterday- asking them why the tracking information was still not updating, then I recieved a completely different tracking number stating the item got sent out on Thursday. Was hoping it would come faster as it was being sent via DHL.
No worries though I did manage to get a few g's of some nice shatter to indulge with once it arrives
The FC 710 is awesome, I got it on the recommendation of @mrbonsai420 as a piece to go with my Enail. I've only vaped on it with my Evo and it was awesome. Perfect draw and taste, the amount of water it needs put me off at first but it manages to retain taste very well.
Will update when I get that hydratube, hopefully Monday morning .
_WaxPayne_
Well-Known Member
Heres a video of the Sov 60mm Gridded Stem from Hfy_glass. Sorry it took so long . My glass to whip connector for the Extreme Q is missing so I have to test with dabs for now. Hope you enjoy