Do you know that for sure or just speculating?
-
SCAM WARNING! See how this scam works in Classifieds.
TinyMight / TM 2
- Thread starter kuzko
- Start date
Dr. G
Vapman Collector Vapman Beta Tester eMuseo Vapman
FOR SURE.
Zirconium Balls 6mm x 8 | Soothing Vapours
These 6mm Zirconium (ZrO2) balls can be used in vape equipment to add thermal mass for heating or packing stems for cooling, as desired.
www.soothingvapours.ca
Man, I just bought a Frolic while waiting for the Tafée Bowle 2 to come back in stock... No more cool new stuff please!
Dr. G
Vapman Collector Vapman Beta Tester eMuseo Vapman
Save up your money...I am. When the TM2+ or TM3? ...comes out, I will be in that line. Bowle, Frolic are super excellent....the TM2 is superb hands down. Nothing like it. A class by itself.Man, I just bought a Frolic while waiting for the Tafée Bowle 2 to come back in stock... No more cool new stuff please!
Last edited:
Vaporific
All who wander are not lost...
My Tetra P80 rarely gets air time since I use and love both my TMs so much. Tinymight is amazing! However…
My PH TM2 close to 2 years young is now suffering button issues. It just started a day or two ago. I use on demand mode 99% of the time with both TMs (the other is an OG over 5 years old and still rocks). I’ve removed the battery completely, insterted it again (and it correctly indicates the level) but I can’t turn it on with the usual 3 clicks. Last night it turned on in session mode and hadn’t realized it; it turned off ok but turning it back on since has been problematic and not the norm. It won’t turn on. I did swap a different and fully charged batt to no avail. Any thoughts or suggestions?
Weekend regards to all.
Last edited:
Photonic
Lesser-Known Lurker
IMO, with vapes like the TB2, Frolic, ConVex, etc on the high end market, I do think the next TM needs to step up it's game a bit... I love my TM2, but the company should do the following in the next gen release (TM3):
1. Retain stem loading, but absolutely avoid the metal cooling unit
2. Increase size slightly to accommodate a 21700 battery
3. Make it more robust and resilient to drops
4. Fix the button so it is never, ever an issue
5. Add auto off
6. Continue with the wood/metal based aesthetic
If this is done, I would buy. Otherwise, I might try other options for electronic portables in the future.
1. Retain stem loading, but absolutely avoid the metal cooling unit
2. Increase size slightly to accommodate a 21700 battery
3. Make it more robust and resilient to drops
4. Fix the button so it is never, ever an issue
5. Add auto off
6. Continue with the wood/metal based aesthetic
If this is done, I would buy. Otherwise, I might try other options for electronic portables in the future.
ElMismo
Well-Known Member
I recently had the exact same problem, in pretty much the exact same conditions.My Tetra P80 rarely gets air time since I use and love both my TMs so much. Tinymight is amazing! However…
My PH TM2 close to 2 years young is now suffering button issues. It just started a day or two ago. I use on demand mode 99% of the time with both TMs (the other is an OG over 5 years old and still rocks). I’ve removed the battery completely, insterted it again (and it correctly indicates the level) but I can’t turn it on with the usual 3 clicks. Last night it turned on in session mode and hadn’t realized it; it turned off ok but turning it back on since has been problematic and not the norm. It won’t turn on. I did swap a different and fully charged batt to no avail. Any thoughts or suggestions?
Weekend regards to all.
I also had a small calibration problem since the beginning (came in too low)
Free trip to Finland.
Came back like new!
Good job Tm team!!
If your warranty is valid, I would ship it back to meet its maker!
It will give you time to rediscover your tetra or cave for a new one! Good luck!
When mine crapped out it was almost $50 postage, shipped to Vgoodiez per TinyMight’s instructions, and came back not working. Crappy service from a company that wants me to spend more money with them.I recently had the exact same problem, in pretty much the exact same conditions.
I also had a small calibration problem since the beginning (came in too low)
Free trip to Finland.
Came back like new!
Good job Tm team!!
If your warranty is valid, I would ship it back to meet its maker!
It will give you time to rediscover your tetra or cave for a new one! Good luck!
OlfactoryHue
Member
i can't imagine they "want" to keep having warranty claims.. surely they are going to attempt to fix the "glitch"
ElMismo
Well-Known Member
I bought directly from the site twice.
One OG, one PH
Had to use the warranties twice, once for each. (OG after 4 years)
Both times, free of charge.
Really can’t complaint about their customer service
.Surely they’ll do everything they can to fix this button problem.
I also never had a problem with my first one.
I carry it many places..
In my opinion, one of the best ! Hard to beat!
Durbandream
Well-Known Member
Just buy another one and have two. Trust me, they're not hard to break.
BabyFacedFinster
Anything worth doing, is worth overdoing.
Just picked up some GMO Cookies for the first time. I had heard a lot about this strain but never had the opportunity to pick from a good batch of it. I wanted to see what the strain was all about so I loaded up my handy rocket stem and had the TM2 set just below 2. That's also a low 2, since I re-calibrated mine to run cooler. At these temps, I am not at a loss for clouds by any means.
Never had weed that tasted like earth and garlic, but holy shit did this send me to the couch. The TM2 really brought out the best in this strain. A new couch-locking favorite for me.
Never had weed that tasted like earth and garlic, but holy shit did this send me to the couch. The TM2 really brought out the best in this strain. A new couch-locking favorite for me.
Last edited:
OlfactoryHue
Member
I like the PH aesthetic with the black that they have teased so i'm waiting on them with full details on updates...
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
That's entirely up to you, the original TM was great and the TM2 is still phenomenal, even without all the latest updates, we don't know all the changes that will be in the next version or how much it will cost, could be significant differences, but they might not all be better, would not make the original TM/TM2 any worse, they are still great vapes, so that's all you have to decide. I wouldn't worry about picking one up now, who knows how long it will take for another new version, and if it will even be more appealing?? Or keep waiting if you'd rather know and have the patience, but I would rather have TM in rotation sooner personally
Vaporific
All who wander are not lost...
Miraculously my PH TM2 is working again and I haven’t had the issue with the button. I’m not sure what happened, perhaps it was in a recalibration mode or similar but I’m not sure. I took the battery out & let it sit for a couple of days before putting in another battery and trying it again. Still not sure if I have a mechanical issue but a working Tinymight is better than anything.